ICHECKEY iFORCE T1 Desktop Wireless Charging Stand User Manual
- June 5, 2024
- ICHECKEY
Table of Contents
DESKTOP WIRELESS CHARGING
STAND
User manual
Product recommendation
The products adopt 01 BPP EPP certification protocol integrated MCU, support and expand the mainstream third-party quick charging protocol wireless charging control chip scheme, compatible with QIEPP, LG10W-15W, Samsung 10W quick charging, Apple 7.5W quick charging, Huawei 10W quick charging, and another mainstream mobile phone quick charging. Automatic detection and support DC5V, DC9V, QC2.0, QC3.0 power input, and design auxiliary button trigger induction, automatic alignment coil, and strong compatibility.
*The back of the phone should not have a ring holder, thickening objects or metal objects, otherwise it will affect the efficiency of charging.
Product details
1, Coli 2., Anti-slip pad
3, Holder 4, Type-C port
Accessories
1 x Wireless charging phone holder
1 x USB cable
1 x User manual
Instructions
- Please use the QC2.0/QC3.0 adapter with
- After the product is powered on, the indicator light (blue) will light up and move upward along with the coil to sense the If the phone is not placed on the top, the indicator light will move down and stop.
- The mobile phone can be placed horizontally or vertically when it is charged The product triggers key commands through FOD induction and mobile phone gravity. If the coil of the product moves normally or is not reset, the mobile phone can be charged only after the coil stops moving and is reset to the original position.
- When the phone is removed or the product cannot sense the phone, the coil will automatically reset the standby, and the standby indicator will be steady blue.
Parameter
Input: 5V, 9V, 12V/2A(Max) Working distance: 1-6mm
Power: 15W(Max)
Transfer efficiency: a,75% Dimension: 6698118mm
Weight: N.W.:163g
Attention points
- Keep locked up and out of the reach of
- Don’t use machines in a damp environment.
- Do not disassemble the product without
- Do not throw/hit the product strongly.
- Please do not separate, maintain, or refit the product if you were not a professional.
- Do not put the mobile phone on the motor while it is
- Please use the 0/QC3.0 standard adapter.
Display
Function| The blue light is on after the power is turned on.| The blue light
is in a breathing state when charging.
---|---|---
The blue light is steady when the product is in a static state.| When the FOD
function detects a foreign body, the indicator goes off.
FCC Requirement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving
- Increase the separation between the equipment and
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>