ICHECKEY M6 Magnetic Car Mount Wireless Charger Installation Guide
- June 16, 2024
- ICHECKEY
Table of Contents
ICHECKEY M6 Magnetic Car Mount Wireless Charger
Product Specifications
- Model: M6/M6PRO
- Input: 5V9V/12V 2A (MAX)
- Power: 15W (MAX)
- Receive Distance: <6mm
- Dimensions: 65.6mm (Diameter) * 38.5mm (Thickness)
- Weight (including clips): 102.7g
- Material: PC+ABS
Product Usage Instructions
Air Outlet Mount Installation Procedure
- Tread the nut into the rotating ball of the mount.
- Press the universal rotary ball and nut into the bracket.
- Put the air vent mount into the air grille.
Installation Method
- Loosen the nut of the air outlet mount and insert the mount into the air outlet.
- Turn and tighten the nut on the mount.
- Adjust the angle, connect the Type-C cable, and the indicator will turn on.
- The mobile phone will automatically adsorb when approaching the product and align with the wireless charging area.
Precautions
- Keep out of reach of children.
- Do not use it in damp environments.
- Please do not dismantle the product without permission.
- Avoid using the product in a way that involves whacking, bumping, or impacting it.
- Do not attempt to repair this product if you are not a professional.
- Please use the QC2.0/QC3.0 adapter to charge the product.
- The back of the phone cannot be equipped with a ring holder (socket) or other items beyond the range of the phone’s wireless charging reception. Otherwise, the charging power will be affected.
Brochure
Thank you for choosing this product. This product is a smart wireless charger
car phone holder with a smaller size and simple appearance, supports a single
channel of maximum 15W output, Input voltage mutation detection, overcurrent
detection,coil peak limit, and overheat limit to ensure that the receiving
phone in a safe working range. Built-in ring magnet, strong stable suction,
the mobile phone automatically adsorb when approaching the product and aligns
with the wireless charging area, 360° free rotation, making driving safer.
Please read this manual carefully before using this product and keep it for
your future reference.
Product destails
- Charging sending face
- Indicator
- Type-C charging port
- Fixed nut
- Multi-angle rotate ball
- Locking Knob
- Telescopic Hook
Air outlet mount installation procedure
- Tread the nut into the rotate ball of the mount.
- Then press the universal rotary ball and nut into the bracket.
- Put the air vent mount into air grille.
Product parameters
- Model: M6/6PRO
- Input: 5V/9V/12V 2A(MAX)
- Power: 15W(MAX)
- Receive distance: < 6mm
- Dimension: 65.6mm (Diameter)*38.5mm(Thickness)
- Weight: including clips=102.7g
- Material: PC+ABS
Instructions
Installation method
- Loosen the nut of the air outlet mount and insert the mount into the air outlet mount.
- Turn and tighten the nut on the mount.
- Adjust the angle, connect the Type-C cable, and the indicator turns on.
- mobile phone automatically adsorb when approaching the product and aligns with the wireless charging area.
Precautions
- Keep out of reach of children.
- Do not use it in a damp environment.
- Please do not dismantle the product without permission.
- Avoid using the way in whack, bump, or impact.
- Do not repair this product if you are not a professional.
- Please use the QC2.0/QC3.0 adapter to charge the product.
- The back of the phone cannot be equipped with a ring holder(socket), and other items beyond the range of the phone’s wireless charging reception. Otherwise, the charging power will be affected.
FCC
FCC Requirement
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
- This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
- This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FAQ
- Q: Can I use this charger with any mobile phone?
- A: This charger is compatible with mobile phones that support wireless charging.
- Q: Can I charge multiple devices simultaneously?
- A: No, this charger is designed to charge one device at a time.
- Q: What type of adapter should I use to charge the product?
- A: Please use a QC2.0/QC3.0 adapter to ensure optimal charging performance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>