ICHECKEY W5 Automatic Alignment Coil Wireless Car Charger Mount User Manual
- June 4, 2024
- ICHECKEY
Table of Contents
ICHECKED
Automatic alignment coil wireless car charger mount
User Manual
Automatic Alignment Coil Wireless Car Charger Mount
Note: For best performance and safety, please read this manual carefully before using the product.
Product Diagram
| 1 . Wireless Charging Area | 2.Type-c Interface | 3. Clamping Arm |
|---|---|---|
| 4. Mechanical Key | 5. Cradle Foot | 6. Power Indicator |
| 7.Ball Joint | 8.Nut | 9.Grip Locking Knob |
| --- | --- | --- |
User Instruction
Connect the air vent clamp to the device
- Unscrew the pivot locking nut from the back of the mount
- Place the nut around the ball joint, and push into the back of the mount
- Tighten the nut clockwise
Attach the clamp to car vent
Attach the product on the car’s air vent, turn the locking knob to adjust the
length of hook clip until the grip securely locks onto your air
vent.
Connect power to car charger
Use the Type-C cable
packed in the box to connect the device and the car charger.
Tips: To achieve fast charging, QC2.0/3.0 car charger and 2A cable are
required.
Charging your cellphone
- Connect the product to car charger with included Type-C cable, and the red indicator will light up.
- Press the key to open the clamping arm, put the mobile phone on the holder, then push the clamping arms back to lock your phone, the coil will move to scan and charge,the blue indicator will light up.
- The cradle foot can be manually retracted and adapted according to the size of the mobile phone.
Note Under normal
charging conditions, the charger and mobile phone could be slightly hot; the
temperature may rise if the mobile phone is working while charging (such as
playing video) please stop charging your phone when the charger is over
heating. Our product will automatically stop charging when overheating- lease
try it again when it’s cooling down
Each gear corresponds to the mobile phone model
Firest gear: Phone 13 Mini, iPhone 12 Mini, iPhone 11 Pro, iPhone 8,
iPhone X, iPhone XS, and other 4.7-6.0 inch mobile phones.
Second gear: iPhone 13 Pro, iPhone 12 Pro, iPhone 13, iPhone 12, iPhone
XR, and other 6.1-6.4 inch mobile phones.
Third gear: iPhone 13 Pro Max, iPhone 12 Pro Max, iPhone 11 Pro Max,
iPhone Xs Max, and other 6.5-6.7 inch mobile phones.
The Explanation of bottom bracket retraction:
The bottom bracket can be adjusted according to the different sizes of the
mobile phone. So that it is convenient to place the mobile phone when charging
without blocking your button function and improving the charging efficiency.
Precautions
- Do not use external force to move the left and right clamping arms.
- Keep out of reach of children.
- Please keep the equipment dry. Rain, moisture and various liquid may contain minerals that will corrode the circuit. If the equipment is wet, please dry the product as soon as possible or use a soft cloth to wipe it clean.
- Please use the QC2.0/QC3.0 car charger to charge the product.
- The device charge the phone which supports wireless charging. It is recommended that the thickness of your phone case is within 6mm.
- Please do not store the equipment in a cold place. Otherwise, if the temperature rises to normal temperature, moisture will pent up inside it and damage the electric appliance.
- Please do not attempt to open the equipment, unauthorized disassembly or modification will damage equipment or related wireless charging functions.
- Please do not throw, tap or shake the equipment; rough handling of the equipment will damage the internal circuit board and the mechanical structure.
- Please use a clean and moist soft cloth to clean the surface of the equipment. Do not use or store the equipment in dusty or dirty places.
- Some components of this product are magnetic and metal materials may be adsorbed onto this product. Please do not use bank cards, credit cards or any other items with magnetic near the product so as to avoid losing the data stored due to demagnetization.
Specifications
| Model | W5 |
|---|---|
| Input | 5V /9V /12V 2A(MAX) |
| Output power | 5W/7.5W/10W/15W |
| Receiving distance | <6mm |
| Size | 187482mm |
| Weight | 174g |
In the box:
IC: 28703-111
FCC Requirement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.