ICHECKEY T7 3 in 1 Foldable Magnetic Wireless Charger Stand User Manual

ICHECKEY T7 3 in 1 Foldable Magnetic Wireless Charger Stand

Product Details

• Product Name: 3 in 1 Foldable Magnetic Wireless Charger Stand
• Model No.: T7

Specifications

• Model: T7
• Input: 9V/12V 2A (MAX)
• Output 1: Phone 15W (MAX)
• Output 2: iWatch 2.5W (MAX)
• Output 3: Earphones 3.5W (MAX)
• Dimension: about 1347322mm
• Material: Aluminum Alloy+PC+ABS
• Weight: N.W. about 228g (without power adapter+USB cable)

Precautions
FCC Requirement:

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit of different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
• This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Product Usage Instructions

Charging Pad for Phone

1. Ensure that the charging pad is connected to a power source using the provided power adapter and Type-C cable.
2. Place your compatible phone with wireless charging capability on the charging pad, aligning the phone’s charging coil with the charging pad’s coil.
3. Wait for the phone to start charging. The LED indicator on the charging pad will light up to indicate that charging is in progress.

Charging Pad for iWatch

1. Ensure that the charging pad is connected to a power source using the provided power adapter and Type-C cable.
2. Place your iWatch on the designated area of the charging pad, aligning the charging contacts on the watch with the corresponding contacts on the charging pad.
3. Wait for the iWatch to start charging. The LED indicator on the charging pad will light up to indicate that charging is in progress.

Charging Pad for Earphones

1. Ensure that the charging pad is connected to a power source using the provided power adapter and Type-C cable.
2. Place your compatible wireless earphones in the designated area of the charging pad, aligning the charging contacts on the earphones with the corresponding contacts on the charging pad.
3. Wait for the earphones to start charging. The LED indicator on the charging pad will light up to indicate that charging is in progress.

Foldable Design
The charger stand can be folded for easy storage and portability. To fold the charger stand:

1. Gently push the two sides of the charger stand toward each other.
2. The charger stand will fold inwards, reducing its size for convenient storage.

Safety Precautions
To ensure safe usage of the product, please adhere to the following precautions:

• Do not disassemble or modify the product.
• Avoid exposing the product to water or other liquids.
• Keep the product away from high temperatures, direct sunlight, and flammable materials.
• Do not place metal objects on the charging pad as they may interfere with the charging process or cause damage.
• Keep the product out of reach of children.

FAQ (Frequently Asked Questions)

• Q: Can I charge multiple devices simultaneously?
  A: Yes, you can charge a phone, iWatch, and wireless earphones simultaneously as long as they support wireless charging and are placed on the corresponding charging pads.

• Q: Is this charger stand compatible with all phone models?
  A: The charger stand is compatible with phone models that support wireless charging. However, please check your phone’s specifications to ensure compatibility.

• Q: Can I use my own power adapter and Type-C cable?
  A: Yes, you can use your own power adapter and Type-C cable as long as they meet the required specifications (Input: 9V/12V 2A).

Note : For best performance and safety, please read this manual carefully before using the product

Brochure

• This product is a wireless charging solution equipped with advanced control chips and certified under the CE certification protocol. This innovative device supports various fast charging protocols from third-party manufacturers to ensure compatibility with mainstream charging technologies.
• The main material of this product is composed of aluminum alloy providing better charging efficiency and heat dissipation capabilities. The device simplifies the charging process. It has three independent built-in chips, which can intelligently match mobile phones, Bluetooth earphones, and Apple watches at the same time. Only using one cable can charge multiple devices without any interference or affecting safety.
• The mobile phone terminal features N52 strong magnets precisely aligned with the magnetic suction module found in original Apple devices. For the Watch terminal, we have implemented an upgraded magnetic suction coil. The earphone terminal has wide compatibility.It can realize wireless fast charging well without damaging the device. This product provides efficient safe and fast charging, and does not cause any harm to your equipment It supports the maximum output of 15W on a single channel to achieve fast charging. At the same time, the product integrates a number of advanced features to ensure safe and efficient charging. It includes intelligent foreign object detection. If any foreign object detection is detected on the charging surface. it will prevent charging.It also has input voltage mutation detection, over-current detection, coil peak limit, and overheating limit environment for your mobile phone.
• The product has a sleek appearance and can be folded for compact storage, making it suitable for various scenarios such as home, office, and travel. You can rely on it to provide fast and reliable charging wherever and whenever you need it.

Product details

Charging pad for Phone

Specifications

• Model:T7
• Input:9V/12V 2A(MAX)
• Output 1: Phone 15W(MAX)
• Output 2: iWatch 2.5W(MAX)
• Output 3: Earphones 3.5W(MAX)
• Dimension: about 1347322mm
• Material: Aluminum Alloy+PC+ABS
• Weight: N.W. about 228g(without power adapter+USB cable)

Precautions

• Keep it out of the reach of children;
• It is prohibited to disassemble the product without permission
• Avoid strong falls and collisions;
• A non-specialized person does not disassemble and repair this product;
• Pay special attention to that this product needs to be matched with QC2.0/QC3.0 and other formal and certified chargers;
• Do not attach ring buckles, articles that increase the thickness of the phone, or metal objects on the back of the phone to avoid affecting the use of wireless charging and charging power of the phone;
• Do not put mobile phones, watches, and earphones on the charger or a long time after they are fully charged. Cut off the power supply of the charger after charging.

Product Standard Code: Q/AQL 003—2017

FCC Requirement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• (1) this device may not cause harmful interference, and
• (2) this device must accept any interference received, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>