Parker F11-10CC Motor Fixed Displacement Bent Axis User Manual
- October 30, 2023
- Parker
Table of Contents
Parker F11-10CC Motor Fixed Displacement Bent Axis
Introduction
Please read this User Manual, as it contains information about the wonderful features of this Charging Trolley as well as some tips to make more enjoyable.
Important Read this user manual carefully before you use the appliance.
Save it for future reference.
Danger Make sure the AC power section (plug/socket) does not get wet.
Specification
- Model: F11-10CC
- Input: 100-120V-50/60Hz 4A Max
- Output/Port: 5V-2.4A Max
- Charging Standard Complied with:
- Apple 2.4A(Divider1 /2/3),
- Samsung (D+/D- 1.2V), BC 1.2
- Charging Ability: 10pcs USB-C Device
- LED Indicators:
- Green: Fully Charged/No Load
- Red: Charging
- Slot Size: 10.63×8.27×1 .02″
- Case Size: 19.29×14.17×10.43″
Charge
- Put the charging trolley on flat surface near an AC socket. Ensure the ventilation system not be covered.
- Open the charging trolley.
- lnsert the power cord plug into the external connector of charging trolley and connect the other end with AC socket.
- Press “I” to power the USB ports.
- Put tablets into the inner compartments of trolley, connect USB ports and tablets with USB cables, then tablets are charged.
Tips: The USB cables can be easily managed by tying them up into small loops.
Cleaning
Always unplug the charging trolley before you clean it. Clean surface with a soft dry cloth.
Storage
Store charging trolley in the conditions of temperature -13°F- 122°F and
relative humidity 20-90% RH non-condensing.
Move and Transportation
- Press “O” to turn off the power
- Unplug the USB cables.
- Unplug the AC power cord.
- Make sure all the accessories are stored well in the correct position.
- Close the charging trolley and lock latches.
Environment
Do not throw away the appliance as the normal household waste, but hand them
in at an official collection point for recycling. By doing this, you help to
preserve the environment.