ICHECKEY T9 3 in 1 Foldable Wireless Charger User Manual
- June 15, 2024
- ICHECKEY
Table of Contents
3 in 1 Foldable
Wireless Charger
User Manual
Model No. T9
T9 3 in 1 Foldable Wireless Charger
Note: For best performance and safety, please read this manual carefully before using the product
Brochure
This product is a wireless charging solution equipped with advanced control
chips and certified under the CE certification protocol. This innovative
device supports various fast charging protocols from third-party manufacturers
to ensure compatibility with mainstream charging technologies.
The main material of this product is composed of aluminum alloy providing
better charging efficiency and heat dissipation capabilities. The device
simplifies the charging process. It has three independent built -in
chips,which can intelligently match mobile phones, Bluetooth earphones and
Apple watches at the same time.
Only using one cable can charge imultiple devices without any interference or
affecting safety.
The mobile phone terminal features N52 strong magnets precisely aligned with
the magnetic suction module found in original Apple devices.For the Watch
terminal, we have implemented an upgraded magnetic suction coil. The earphone
terminal has wide compatibility. It can realize wireless fast charging well
without damaging the device.
This product provides efficient and safe and fast charging,and does not cause
any harm to your equipment It supports the maximum output of 15W ona single
channel to achieve fast charging. At the same time, the product integrates a
number of advanced features to ensure safe and efficient charging. It includes
intelligent foreign object detection. If any foreign object detection is
detected on the charging surface. it will prevent charging.It also has input
voltage mutation detection, over-current detection, coil peak limit, and
overheating limit environment for your mobile phone.
The product has a sleek appearance and can be folded for compact storage,
making it suitable for various scenarios such as home, office, and travel. You
can rely on it to provide fast and reliable charging wherever and whenever you
need it.
Product details
Specifications
Model: T9
Input: 9V/12V 3A(MAX)
Output 1: Phone 15W(MAX)
Output 2: iWatch 2.5W(MAX)
Output 3: Earphones 3.5W(MAX)
Dimension: about 1407020mm
Material: Aluminum Alloy+PC+ABS
Weight: N.W. about 189g (Without power adapter+USB cable)
Precautions
- Keep it out of the reach of children;
- It is prohibited to disassemble the product without permission;
- Avoid strong falls and collisions;
- Non-specialized person does not disassemble and repair this product;
- Pay special attention to that this product needs to be matched with QC2.0/QC3.0 and other formal and certified chargers;
- Donot attach ring buckles, articles that increase the thickness of the phone or metal objects on the back of the phone to avoid affecting the use of wireless charging and charging power of the phone;
- Do not put mobile phones, watches and earphones on the charger or a long time after they are fully charged. Cut off the power supply of the charger after charging.
Product Standard Cade: Q/AQL 003-2017
FCC Requirement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’ s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>