MASTERBUILT MB20101719 Smoker Leg Kit Instruction Manual
- June 5, 2024
- Masterbuilt
Table of Contents
****
**MASTERBUILT MB20101719 Smoker Leg Kit
**
WARNING
- To avoid personal injury and/or property damage, please read and follow all of these instructions before assembly and operation.
- Use legs on the stable and level surfaces only.
- Keep this manual for future reference.
BEFORE ASSEMBLY READ ALL INSTRUCTIONS CAREFULLY.
- Assemble on a clean flat surface.
- Tools needed: Adjustable wrench, pliers, Phillips head screwdriver
- Approximate assembly time: 45 minutes
- The actual product may differ from the picture shown.
Parts List
This leg kit is designed to fit the MES 300 and MES 400 Series by Masterbuilt. Additional parts are included but only certain parts are needed based on the size of your smoker.
Hardware List
Assembly
- Remove grease tray. Grease tray brackets can remain attached to the bottom of smoker but are not pictured in the leg kit assembly steps.
- Remove front brace.
- Remove rear brace.
- Remove left and right side braces.
- Remove rear leg screws and washer from back of smoker.
- Remove rear legs from smoker. The smaller screws and washers will be re-used to assemble new legs.
- Remove front legs from smoker.
- Install left and right front legs with casters.
- Install left and right rear legs. Re-use smaller screws and washers removed in step 6.
- Secure left and right rear legs to back of smoker.
- Install axle through holes in rear legs, then large wheels with caps.
- Install left and right side braces.
- Install rear brace.
- Install front brace.
- Install grease tray through front brace into grease tray brackets.
WARNING
- The smoker should only be rolled on a smooth surface. The smoker should never be rolled up or downstairs or on uneven surfaces. Potential damage to the smoker or harm to the user may result from failure to follow warnings.
STOP
DO NOT RETURN TO RETAILER for assembly assistance, missing or damaged
parts. Please contact MASTERBUILT customer service at
1-800-489-1581 or
support.masterbuilt.com.
Masterbuilt 1-Year Limited Warranty
Masterbuilt warrants its products to be free from defects in material and
workmanship under proper assembly, normal use and recommended care for 1 year
from the date of original retail purchase. The Masterbuilt warranty does not
cover paint finish as it may burn off during normal use. The Masterbuilt
warranty does not cover rust. Masterbuilt requires proof of purchase for a
warranty claims, such as a receipt. Upon the expiration of such warranty, all
such liability shall terminate.
Within the stated warranty period, Masterbuilt, at its discretion, shall
replace defective components free of charge, with the owner being responsible
for shipping. Should Masterbuilt require the return of component(s) in
question for inspection, Masterbuilt will be responsible for shipping charges
to return the requested item. This warranty excludes property damage sustained
due to misuse, abuse, accident, or damage arising out of transportation.
This express warranty is the sole warranty given by Masterbuilt and is in lieu
of all other warranties, expressed or implied including implied warranty,
merchantability, or fitness for a particular purpose. Neither Masterbuilt nor
the retail establishment selling this product has the authority to make any
warranties or to promise any remedies in addition to or inconsistent with
those stated above. Masterbuilt’s maximum liability, in any event, shall not
exceed the purchase price of the product paid by the original consumer/
purchaser. Some states do not allow the exclusion or limitation of incidental
or consequential damages. In such a case, the above limitations or exclusions
may not be applicable.
California residents only: Notwithstanding this limitation of warranty, the
following specific restrictions apply; if service, repair, or replacement of
the product is not commercially practical, the retailer selling the product or
Masterbuilt will refund the purchase price paid for the product, less the
amount directly attributable to use by the original buyer prior to the
discovery of the nonconformity. The owner may take the product to the retail
establishment selling this product in order to obtain performance under
warranty. This express warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
Visit masterbuilt.com or complete the form below and return to:
Attn: Warranty Registration
Masterbuilt Manufacturing, LLC
1 Masterbuilt Court | Columbus, GA 31907
Name: ___ Address:
__ City:
State/Province: ____ Postal Code: ____ Phone Number: E-mail Address: __ Model Number: __ Serial Number: ____ Purchase Date: - __-__ Place of Purchase: ____ *Model Number and Serial Number are located on silver label on back of smoker.
Rest assured, we’re here to help.
Customer Service masterbuilt.com/contact
Masterbuilt Manufacturing, LLC
1 Masterbuilt Court | Columbus, GA | 31907
@masterbuilt
1.800.489.1581
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>