SAIREN VM-Q1 Video Camera Microphone Instruction Manual
- June 5, 2024
- SAIREN
Table of Contents
SAIREN VM-Q1 Video Camera Microphone
Thanks for purchasing the SAIREN VM-Q1.
The SAIREN VM-Q1 incorporates a high-quality cardioid condenser microphone
capsule for great quality audio recordings when used with a wide range of
cameras. A directional microphone, the SAIREN VM-Q1 reduces distracting
peripheral sounds and focuses on the audio in front of the camera. Perfect for
capturing incredible audio to accompany inspiring vision.
The microphone body is made from aluminum, giving it a high level of RF
rejection and light weight, Included with the SAIREN VM-Q1 is a patented and
professional shock mount. Featuring a suspension structure composed of a hard-
wearing thermoplastic, it is far more effective at minimizing unwanted
vibrations, handling and cable-borne noise than traditional elastic
suspensions. Also included is the furry wind shield with foam inner cell,
designed for use in outdoor scenarios where wind and environmental noise can
inhibit recordings. also includ-ed is the convert cable, fromTRS to TRRS that
allows the SAIREN VM-Q1 to be used with smartphones, to capture crystal clear,
directional sound for video and video applications.
Features
- Customized microphone, flat frequency response
- Patented shock mount,minimizing the unwanted vibrations noise Low self -noise
- Super-cardioid recording pattern（minimizing the noise interference of non-subject ）
- All metal microphone body
- No battery required
Specifications
- Sensor:Electret Condenser Microphone
- Polar pattern: Cardioid
- Frequency Response: 20Hz-20kHz
- Signal to Noise Ratio: 70dB
- Sensitivity: -38.0dB (F=1KHZ,S.P.L=1Pa 0dB=1V/Pa)
- Plug:3.5 mm TRS and TRRS connector
- Dimensions: Φ20mm*70mm
- Net weight: 66g
FREQUENCY RESPONSE
POLAR
PATTERN
Bundle includes
-
Using the SAIREN VM-Q1with cameras,camcorders, audio recorders and other audio/video recording devices.
-
Lock the microphone on your device through the hot shoe.
-
Plug the TRS audio cable into the input jack of your device
-
-
Using the SAIREN VM-Q1 with smartphone
- Plug the TRRS cable into the audio jack of your smartphone (If the smartphone is Type-C or Lightning jack, you need to buy extra convert cable)
- Open the audio-only or video app and begin recording
Troubleshooting
If you have any problem using our SAIREN VM-Q1,using the following checking
list.
If any problem permits, please consult our local dealer or contact us directly
at cs@sairenvideo.com.
| Problem | Solution |
|---|---|
| The microphone can’t work | Make sure that using the correct audio cable: |
1. For cameras, using the TRS to TRS cable .
2. For smartphone, using the TRS to TRRS cable
Too much ambience noise is being picked up| Make sure that the microphone is close and direct to the subject.
A certain amount of ambient noise is unavoidable in a loud environment.
Shenzhen Sairen Imagine Co.,ltd.
The SAIREN logo is a trademark which is registered and owned by Shenzhen
Sairen Imaging Co.,ltd.
Email: sales@sairenvideo.com
www.sairenvideo.com