CTA AUT-VDMICC Vehicle Dash Mount Kit Instruction Manual
- June 13, 2024
- CTA
Table of Contents
Vehicle Dash Mount Kit
with Inductive Charging Case
AUT-VDMICC
INSTRUCTION – MANUAL
AUT-VDMICC Vehicle Dash Mount Kit
INSTALLATION:
- Setting up Induction Dock to VESA
1A. Align VESA holes of induction dock (C) to the VESA holes of the VESA plate (A). Using the provided a/Jen key tool (E), rotate screws (F) in as shown while holding the hex nuts (D) from the other side with your hand. Rotate in until securely fastened. - Mounting base to surface or AMP compatible connection
2A. While using a screwdriver (not included) , rotate in screws (G) to surface as shown until securely fastened.
How to Insert Tablet into Case
- Peel the external silicone sleeve from the internal hard case
- To open internal hard case, apply gentle pressure to the small clips (as shown). The case will open with all (4) sides being unclipped
- Insert tablet into the back portion of the hard cover
- Once tablet is in the back portion of the case, look to the bottom and plug the charging cable into the power socket of the tablet. After, place the internal hard case front cover on the top of the case and clip all (4) sides shut around the case.
- Place on the external silicone rubber sleeve over the hard case again.
How to Setup Inductive Charging
Align the magnets. Please align the battery pack to the battery pad on the right side so tablet will charge properly. Tablet for illustration purposes and not included
Plug Power Cable into Dock to Charge
Plug one end of your power adapter (H) into an outlet. Plug the other end into your inductive charging case and dock charging port.
Proper Charging Setup Indicator
Connect the AC/DC Power Supply to the charging plate as pictured.
Take care to assure that the charging case and back charging plate are aligned
properly. When done properly, you’ll see the blue indicator light up on the
back of the charging plate. 
Charging your Inductive Case & Dock in your Vehicle
Plug one end of your car power adapter (I) into the dock charging port. Plug
the other end into your vehicle auxiliary power outlet.
36 Taaffe Place Brooklyn, NY 11205
spoon@ctagital.com
888-733-4448
www.ctadigital.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>