ZEBRONICS ZEB Delight Portable Wireless Speaker User Manual
- June 5, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS ZEB Delight Portable Wireless Speaker
Dear Consumer,
Thank you for purchasing ZEB-DELIGHT Portable BT Speaker. Please read the user
manual carefully before usage & save it for future reference.
Note:
- Avoid the usage of this product in a high temperature and high humidity environment.
- Avoid the self-disassembly of the product as it results in the failure of the Warranty.
- Turn off the speaker if the speaker is not being used for a long period of time.
Features:
- Wireless BT
- Built-in FM Radio
- Supports USB & mSD Card Media /volume control Fabric finish
- Call function
- Built-in rechargeable battery
Specification:
-
Output power (RMS) : 3W
-
BT Version: 5.0
-
Driver size:4Smm
-
Speaker impedance:30
-
Frequency response: 80Hz-18kHz
-
S/N Ratio: >85dB
-
Max Supported USB &
micro SD memory size: 32GB Supported -
Audio formats: MP3
-
Charging time: 2. SH
-
Playback time: 6H*
-
Product dimension: 118 x 39 x 79 mm
(W x D x H) -
Net. weight: 185g
Instruction of Buttons
- + Short press to change the next track /channel, long press to increase the volume
- – Short press to change the previous track/ channel, and long press to decrease the volume.
- > Short press to play/ pause the track, Answer I hang up the call, long press to reject the call Double Press to re-dial
- M Change mode (BT, FM, USB & micro SD)
General Instruction
Bluetooth connectivity
When the speaker is in BT mode, scan for nearby Bluetooth devices on your
phone and connect with the device named “ZEB-DELIGHT”. once connected, a
voice prompt can be heard.
USBMode
Once a USB is inserted, the speaker will detect & automatically start playing
songs from the USB (Plug & Play Mechanism).
Micro SD Mode
Once the micro SD card is inserted, the speaker will detect & automatically
start playing songs from the micro SD card (Plug & Play Mechanism).
FM Connectivity
- Switch the speaker to FM mode using the mode (M) button.
- Connect the micro USB cable to the speaker and leave the other end open (this acts as the FM antenna).
- Press the Play/Pause button once to scan the FM Channels.
- Once the scanning is done, the speaker will start playing from the first saved channel.
- To Change the channels you can use the +/buttons
TWSMode
Turn on both ZEB-DELIGHT Speakers. Make sure that the speakers are in BT mode
Press & hold the “ M ” Key on any one of the speakers to activate TWS
mode.
Now, the speaker will automatically connect to each other.
Now, search for nearby BT devices on your mobile and tap on the BT name ZEB-
DELIGHT to connect.
Charging Instruction
Connect the micro USB plug to the speaker and the other end of the charging cable to a DC SV Adapter / A red LED would glow while charging & the LED would turn OFF once charging is complete.
ISO 9001:2015 Certified Company
www.zebronics.com