ATEN uc3020 CAMLIVE HDMI to USB-C UVC Video Capture User Guide

June 5, 2024
Aten

ATEN uc3020 CAMLIVE HDMI to USB-C UVC Video Capture

Hardware Review

Hardware Installation

Package Contents

  • 1 UC3020 CAMLIVE™ HDMI to USB-C UVC Video Capture
  • 1 USB Type-C to USB Type-A adapter
  • 1 user instructions

Hardware Review

  1. HDMI in
  2.  USB Type-C connector

Requirement

  • Windows 7 or above, Mac OSX 10.13 or later with UVC support One available USB 3.1 Type-C or Type-A port
  • CPU: Intel i3 Dual-Core 2.8GHz or above
  • RAM: 4GB or above
  • Stream software with UVC device support

Hardware Installation

  1.  Power on your host (e.g. laptop) and connect the USB Type-C connector to the host.
  2.  If your laptop only has a USB Type-A interface, connect the (included)
  3. SB Type-C to USB Type-A adapter between the host and the USB
  4. type-C host connector.
  5.  Connect your HDMI source device to the UC3020’s HDMI port.
  6.  To enable UC3020, please download and install a suitable video recording or live streaming software for your requirement.

Support and Documentation
Notice All information, documentation, fi rmware, software utilities, and specifi cations contained in this package are subject to change without prior notifi cation by the manufacturer.To reduce the environmental impact of our products, ATEN documentation and software can be found online at http://www.aten.com/download/

Scan for more information

The terms HDMI, HDMI High-Defi nition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals