ASRock X300 Desk Mini Jupiter Installation Guide

ASRock X300 Desk Mini Jupiter

Package Contents

Front View

Rear View

M.2 SSD

1. Carefully insert the SSD into the slot.
2. Tighten the screw to secure the SSD to the motherboard.

Wireless Module

1. Remove the screw of WLAN card.
2. Remove the WLAN card
3. Disconnect the two antennas by manually lifting off the clips that hold them in place.

DRAM

1. Carefully insert SO-DIMM memory modules.
2. Push down until the modules click into place.

Fan

1. Carefully place the thermal module. Then connect the cable routing.
2. Carefully insert thermal modules.
3. Tighten the screw to secure the heatsink to the motherboard

HDD

1. Tighten 4 screws to secure the HDD.
2. Pull the release lever out. Place the 2.5” hard drive into the bracket HDD. Then slide the 2.5” hard drive into the bracket firmly.
3. Connect HDD SATA Cable to HDD.

Chassis

1. Tighten the two knurled thumb screws to secure the chassis.
2. Attach the VESA mount plate to the rear of a compatible display using the screws provided.
   •  Jupiter can now be mounted by sliding the device into place
   •  Assemble Jupiter to Vesa Mount with M2.5 screws

Safety Information

Your system is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions.

Setting up your system

• Read and follow all instructions in the documentation before you operate your system. Do not use this product near water or a heated source such as a radiator.
• Set up the system on a stable surface.
• Openings on the chassis are for ventilation. Do not block or cover these openings. Make sure you leave plenty of space around the system for ventilation.
• Never insert objects of any kind into the ventilation openings.
•  Use this product in environments with ambient temperatures between 0°C and 40°C
•  If you use an extension cord, make sure that the total ampere rating of the devices plugged into the extension cord does not exceed its mpere rating.

Care during use

•  Do not walk on the power cord or allow anything to rest on it.
•  Do not spill water or any other liquids on your system.
•  When the system is turned OFF, a small amount of electrical current still flow. Always unplug all power, modem, and network cables from the power outlets before cleaning the system.
• IF you encounter the following technical problems with the product, unplug the power cord and contact a qualified service technician or your retailer:
•  The power cord or plug is damaged.
•  Liquid has been spilled into the system.
•  The system does not function properly even if you follow the operating instructions.
•  The system was dropped or the cabinet is damaged.
•  The system performance changes.

No disassembly
IMPORTANT:
The warranty does not apply to products that have been disassembly by users.

Battery replacement and disposal
WARNING:
Risk of explosion if battery is replaced by an incorrect type disposed.

Product disposal notice
IMPORTANT:
This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment, and mercury-containing button cell battery) should not be placed in municipal waste.
Check local regulations for disposal of electronic products.

CE Mark Warning
This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>