Monsher 2332654 Built-In Cooker Hood User Manual

: June 5, 2024
: Monsher

Table of Contents

SAFETY PRECAUTIONS
SECTION 2. MOUNTING AND DIMENSIONS
SECTION 3. CLEANING AND MAINTENANCE
SECTION 4. Troubleshooting
SECTION 5. HELPFUL INFORMATION
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

User Manual

https://monsherrus.ru/catalog/
PRODUCTS

DEAR CUSTOMER,
Thank you for purchasing our equipment! We are sure that appliances of the monster brand, which are modern, functional, and made of high-quality materials and components, will be a reliable assistant in your kitchen.
Please read this manual carefully before starting any installation work. It will help you avoid premature failure, as well as extend the life of your appliance to the maximum possible. Please note that the installation of this appliance must be carried out by a qualified technician and in accordance with these instructions. The manufacturer is not liable for any consequences of failure to observe this condition.
Caution!
The manufacturer is not responsible for any possible errors or misprints in this manual. The manufacturer reserves the right to make any changes, without prior notice, to the design, outside appearance, and scope of supply of appliance, which will be considered necessary and useful according to the manufacturer’s point of view. Possible modifications will not affect the basic properties, including those that relate to the safe operation of the appliance. Section 1.

SAFETY PRECAUTIONS

Assembling and electrical connection of the appliance must be carried out by skilled technicians of the authorized service center.
The appliance is designed to operate on 220-240 V AC. Make sure that the technical parameters of your home power supply system correspond to the data for the power supply. If parameter values are above or below the specified range, the use of the appliance is prohibited.
Do not connect the kitchen air cleaner to the ventilation channels that are used to remove smoke and fumes from the equipment operating on any other energy sources except electric ones.
The appliance is to be connected only to an earthed power supply system.
Do not cook flammable foods below the kitchen air cleaner.
Use the aluminum filter that comes with the appliance. The use of other materials is prohibited!
Do not connect the appliance to the power supply system, until the assembly and installation of the appliance are completed.
Do not use the appliance without the aluminum filter in place.
Do not touch the lamps.
Do not remove the aluminum filter while the appliance is in operation.
Do not disconnect the appliance from the power supply system directly. If necessary, turn the appliance off using the control panel and, only after that, unplug it from the power supply system. When switching on: first connect the appliance to the power supply system, then switch it on using the control panel, but not vice versa!
The appliance requires regular cleaning and maintenance work.
When installing the appliance, observe the required distance between it and the cooking surface of your stove:
– for an electric stove: at least 65 cm
– for gas or gas-electric stove: at least 70 cm
Do not allow children to play with packaging materials, it can be dangerous!
The appliance is allowed to be turned on only once the pots and/or pans are placed on the stove.
For best air cleaning in your kitchen, do not turn off the appliance immediately after the cooking process is completed: let the appliance run for a further 15 minutes. For this purpose, you can also use the timer function (the button «Auto Switch Off Timer» on the control panel).
Ensure adequate ventilation in the kitchen, if a gas stove is operated simultaneously with the appliance.
In case of any malfunctions, contact your nearest authorized service center.
If the kitchen hood is supposed to operate in air discharge mode, then during installation it is important to provide a duct of the corresponding diameter. To prevent loss of performance caused by aerodynamic resistance of the duct, the air duct must not be too long, or curved. Never restrict the duct size, or make sharp bends. In addition, it is preferable to use a smooth PVC duct (round or flat), rather than the flexible corrugated one because bends of a corrugated duct increase the noise level of the hood.
The manufacturer does not bear any responsibility for any possible damage, in case of non-compliance with the above precautions.

Mechanical control (buttons)

A – «Lighting» button
B – «0» button
C – «1» button
D – «2» button
E – «3» button
«Lighting» button – Lighting On/Off
«0» button – hood motor On/Off
«1» button – motor rotation speed 1 (initial level)
«2» button – motor rotation speed 2
«3» button – motor rotation speed 3

TECHNICAL SPECIFICATIONS
Width: 400/540 mm
Control: Push Button – 3 Speed
Motor:110W
Suction power: 480/500 m3
Light bulbs: Led (1a5w)
Diameter of the air discharge pipe:120 mm
Material : Painted Body/2 glass vertical hood
Voltage: 220-240 V/50 Hz
Modes of operation: Air discharge/Recirculation
Filter: 3 Layer AI.Filter/Optional Carbon Filter: KF-Y ( optional)

SECTION 2. MOUNTING AND DIMENSIONS

Please unpack and inspect the appliance! Before starting the installation, make sure that the hood has no obvious transport damage. If such defects are detected, do not install or connect the appliance to the mains.

SECTION 3. CLEANING AND MAINTENANCE

Caution! Before you start cleaning the appliance, disconnect it from the power supply.

Aluminum filter
The aluminum filter is designed to trap grease particles from the flow of air running through it. For this reason, the filter needs regular cleaning. The cleaning interval depends on the frequency of use of the air cleaner. Generally, it is recommended to clean it once a month. To do this, remove the filters, wash them in water with a neutral liquid detergent, dry them, then set them back in the air cleaner. Over time, filters may change color due to regular washing. This is a natural process, which does not indicate a defect, so filter replacement is not required. The aluminum filters can be washed in the dishwasher.

How to remove aluminum filters:

Press on the latch of the filter lock.
Pulling down a bit, remove the filter. In order to put the filters in place after cleaning, follow the above instructions in reverse order.

Carbon filter (used in recirculated air mode)
The carbon filter is designed to trap odors and fumes while cooking. It is used in cases where there is no possibility to connect the air cleaner to a special ventilation duct for discharging air outward. When operating the appliance with a carbon filter, contaminated air is sucked into the appliance and passes through a carbon filter, and then clean air is supplied to the kitchen. The carbon filter should be replaced at regular intervals. The interval of filter replacement depends on the frequency of use of the air cleaner, style of cooking, and frequency of the aluminum filter cleaning. Generally, it is recommended to replace the carbon filter once every 4 months.

How to remove carbon filter:

Remove aluminum filters.
Turn the carbon filter to the left and pull it.
Replace the old carbon filter with the new one.
Put the filter back into place.

If necessary, clean the outside of the air cleaner with a soft, damp cloth. Do not use any abrasive cleaning agents. For painted stainless steel surfaces: to avoid scratching it is recommended to wipe them with a soft, damp cloth in the painting direction. Do not remove the lamp cover during the surface cleaning process.
Caution! Do not use the steam generators for cleaning. Caution! Not following the above rules for cleaning the appliance and replacing filters may cause a fire.
Caution! If you need to transport the air cleaner, first of all, disconnect it from the power supply and proceed with the disassembly. It is recommended that you transport it in the original packaging. If this packaging is not available, package the appliance using materials that prevent possible damage resulting from transportation.

SECTION 4. Troubleshooting

Very often a malfunction of the appliance occurs for minor reasons. So, before you call the service center, please check whether you can troubleshoot yourself. For this purpose please check the following possible causes of malfunctions.

Malfunction	Possible cause	Troubleshooting action
The appliance does not operate	Faulty fuse

The plug is not properly inserted into the outlet
There is no voltage in the power supply system| 1. Check the fuse of the appliance
2. Make sure that the plug is properly inserted into the outlet
Suction power is not sufficient| Incorrect speed selected
Filters are clogged| 1. Increase the suction speed of hood
2. Clean or replace filters
The lamp is not lighting| Faulty fuse
The lamp is burned out or incorrectly installed| 1. Check the fuse of the appliance
2. Make sure that the lamp is installed correctly or replace it

Please note!
The following shall not be considered as defects of the Product

Cooker hoods| Minor technical smells coming from a new product during the initial operation period
---|---
Violation of the operating conditions of the components of the product, made of natural wood
Sound of the airflow passing through the ventilation ducts and channels of the product
Discoloration of housing elements of the product when using the product
Black discoloration and deformation of fat filter elements when using the product

SECTION 5. HELPFUL INFORMATION

Physical characteristics of the sound volume (the sound pressure level) are measured in decibels (dB). «Noise» is a chaotic mix of sounds.
The human ear can detect sounds with a sound volume of 10-15 dB and above.
When choosing a kitchen hood, it is necessary to pay special attention to technical indicators such as the noise level. This indicator is very important, because, and that’s beyond a shadow of a doubt, each of us spends a lot of time in the kitchen. It is especially common for women who love to please their loved ones with deliciously cooked dishes.
According to the surveys, 40% of women do not use kitchen hoods for their intended purpose (it refers to the process of air suction), precisely because they are annoyed with the noise level.
Consequently, such a necessary and needed kitchen appliance, kitchen air cleaner, designed to remove airborne odors, grease, soot, and smoke, becomes almost meaningless.
In comparison with many other manufacturers of kitchen hoods, MONSTER hoods are comfortably quiet. Even at maximum suction power of 1000 m3, the noise level reaches only 42 dB. This allows you to make the cooking process the most comfortable and helpful.
For a more complete understanding of the scale of decibels, you can compare the parameters of the following guidelines:

The intensity of typical noise sources

Recommendations of the manufacturer:

Check the correctness of the warranty card when purchasing the appliance.
Follow the instructions of the manual when operating the appliance.
Use only authorized service centers.
After carrying out any repairs by an authorized service center, the specialists of the center should provide you with a description of the work conducted. This information may be useful for you in the future.
The lifetime of the product:10 years.

DETERMINATION OF THE PRODUCTION DATE BY SERIAL NUMBER

Monsher 2332654 Built In Cooker Hood - Fig 3

Manufacturers:
M&G HAUSGERATE GMBH
Potsdamer Str. 92 10785 Berlin
Tel: (030) 544 37 834 Fax: (030) 544 37 856
Factories-branches of the manufacturer:
TRAOM ELEKTRIKLI ALETLER SAN.VE TIC.LTD.STI
Kumbet Hatun 0.S.B Mah.3.Cad.No:17 Merzifon/Amasya/Turkiye
Ciarko SpOlka z ograniczona odpowiedzialnoscia Sp. K.
38-500 Sanok,u1.0kulickiego 10, Polska

Importers:
LLC «MG Ruslanth»,
141400, Moscow region, Khimki, Butakovo, 4
The manufacturer reserves the right to make any changes to design, outside appearance, and scope of supply of appliance.

NOTES