SUNNY HEALTH FITNESS SF-B1970 Belt Drive Pro Lite Indoor Cycling Bike User Manual

SUNNY HEALTH FITNESS SF-B1970 Belt Drive Pro Lite Indoor Cycling Bike User

Manual

IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your
satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1- 877 – 90SUNNY (877-907-8669).

IMPORTANT SAFETY INFORMATION

We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions.

1. Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly. Your physician’s advice is essential if you are taking medication that affects your heart rate, blood pressure, or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If you do experience any of these conditions, you should consult your physician before continuing with your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To ensure safety, the equipment should have at least 2 feet (60 CM) of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of the equipment can only be maintained if it is regularly examined for damage and/or wear and tear.
6. Always use the equipment as indicated. If you find any defective components while assembling or checking the equipment, or if you hear any unusual noises coming from the equipment during exercise, discontinue use of the equipment immediately and do not use until the problem has been rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 245 pounds (110 KG).
10. This equipment is not suitable for therapeutic use.
11. To avoid bodily injury and/or damage to the product or property, proper lifting and moving are required.
12. Your product is intended for use in cool and dry conditions. You should avoid storage in extreme cold, hot or damp areas as this may lead to corrosion and other related problems.
13. This equipment is designed for indoor and home use only; it is not intended for commercial use.

EXPLODED DIAGRAM

PARTS LIST

HARDWARE PACKAGE

Ordering Replacement Parts (U.S. and Canadian Customers only)
Please provide the following information in order for us to accurately identify the part(s) needed:

• The model number (found on cover of manual)
• The product name (found on cover of manual)
• The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST” (found near the front of the manual)

Please contact us at support@sunnyhealthfitness.com or 1- 877 – 90SUNNY (877-907-8669).

ASSEMBLY INSTRUCTIONS

We value your experience using Sunny Health and Fitness products. For assistance with parts
or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).

STEP 1:
Remove 2 Bolts (No. 26), 2 Spring Washers (No. 27), and 2 Washers (No. 28) from Shipping Tube (No. 17). You may save the Shipping Tube (No. 17) and wooden blocks in case you’d like to repackage and transport this bike in the future.

Attach the Front & Rear Stabilizers (No. 4 & No. 9) to the Main Frame (No. 1) using 4 Bolts (No. 26), 4 Spring Washers (No. 27), and 4 Washers (No. 28). And 2 Bolts (No. 26), 2 Spring Washers (No. 27) and 2 Washers (No. 28) that were just removed. Tighten with Allen Wrench (No. A).

Note: Left Pedal (No. 70L) is marked “L” and Right Pedal (No. 70R) is marked “R”. Remove the Nylon Nuts (No. 71L/R) from Pedals (No. 70L/R) use Spanner (No. C).

Align the Left Pedal (No. 70L) with the Left Crank (No. 69L) at 90° and gently insert the pedal into the crank arm. Turn the Left Pedal (No. 70L) counter- clockwise as tightly as you can with your hand, then tighten and securely with Spanner (No. B).

Hold the bolt of the Left Pedal (No. 70L) use Spanner (No. B). Screw the Left Nylon Nut (No. 71L) clockwise to the thread end of the Left Pedal (No. 70L) securely with Spanner (No. C).

Align the Right Pedal (No. 70R) with the Right Crank (No. 69R) at 90° and gently insert the pedal into the crank arm. Turn the Right Pedal (No. 70R) clockwise as tightly as you can with your hand, then tighten and securely with Spanner (No. B).

Hold the bolt of the Right Pedal (No. 70R) use Spanner (No. B). Screw the Right Nylon Nut (No. 71R) counter-clockwise to the thread end of the Right Pedal (No. 70R) securely with Spanner (No. C).

We value your experience using Sunny Health and Fitness products. For assistance with parts
or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).

STEP 2:
Connect Trunk wire (No. 11) with Sensor Wire (No. 12) (Figure A). Loosen and pull out the L Knob (No. 18). Then insert the Handlebar Post (No. 2) to Main Frame (No. 1), insert and tighten with the L Knob (No. 18) after adjusting the Handlebar Post (No. 2) to the desired position.

Attach the Handlebar (No. 6) to Handlebar Post (No. 2) using 2 Bolts (No. 36) and 2 Nylon Nuts (No. 37). Tighten with Spanner (No. C).

Attach the Device Holder (No. 38) to Handlebar (No. 6) using Screw (No. 39). Tighten with Allen Wrench (No. A).

Insert the Computer (No. 10) to Handlebar (No. 6) (Figure B). Connect Pulse Sensor Wire (No. 13a) with Computer Wire 1 (No. 10a) and connect Trunk wire (No. 11) with Computer Wire 2 (No. 10b) (Figure C).

STEP 3:
Attach the Seat Slider (No. 8) to the Seat Post (No. 7), tighten and secure with Washer (No. 23) and Knob (No. 22).

We value your experience using Sunny Health and Fitness products. For assistance with parts
or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).

STEP 4:
Remove 2 Screws (No. 39) and 2 Washers (No. 87) from Main Frame (No. 1). Attach Bottle Holder (No. 100) to Main Frame (No. 1) with 2 Screws (No. 39) and 2 Washers (No. 87) that were just removed. Tighten and secure with Allen Wrench (No. A).

The assembly is complete!

BATTERY INSTALLATION AND REPLACEMENT

BATTERY INSTALLATION

1. Take out 2 AAA batteries from computer box.
2. Press the buckle of battery cover on the back of the Computer (No. 10), then remove battery cover.
3. Install 2 AAA batteries into the battery case on the back of the Computer (No. 10). Pay attention to the battery + and – poles before installing.
4. Press the buckle of battery cover, then put the battery cover back to the back of the Computer (No. 10).

The installation is complete!

BATTERY REPLACEMENT

1. Press the buckle of battery cover on the back of the Computer (No. 10), then remove battery cover.
2. Remove the 2 old AAA batteries in the battery case and install 2 new AAA batteries into the
   battery case on the back of the Computer (No. 10). Pay attention to the battery + and – poles before installing.
   3. Press the buckle of battery cover, then put the battery cover back to the back of the Computer (No. 10).

The replacement is complete!

NOTE: Always change both batteries at the same time. Do not mix battery types and do not mix old and new batteries. Dispose batteries according to your state and regional guidelines.

ADJUSTMENTS & USAGE GUIDE

EXERCISE COMPUTER

FUNCTION BUTTON:

MODE:

1. Press the button for selection function display value on the computer.
2. Press the button and hold for 2 seconds to reset all values except odometer to zero.

Note: When the user replaces the batteries, all the values will reset to ZERO automatically.

OPERATIONS:
AUTO ON/OFF: The computer will show the workout value automatically as the user begins to exercise. When the bike has become inactive or without any exercise over 4 minutes, the computer will turn off and the workout value on the odometer will be held. While the user starts the exercise again, the workout value on odometer will accumulate continuously.

AUTO SCAN: After the computer is powered on or the MODE button is pressed, the computer will display all function values: TMR-SPD-DIST-CAL-ODO- RPM-PUL (repeat). Every function will display for 6 seconds.

FUNCTIONS:
SPD (SPEED): Displays the current speed being obtained. The range is from 0.0 to 99.9 MPH (Miles per Hour).
DST (DISTANCE): Counts the total distance of an exercise from start to finish. The range is from 0.00 up to 9999 M (Miles).
TMR (TIME): Counts the total time of an exercise from start to finish. The range is from 00:00 up to 99:59.
CAL (CALORIES): Counts the total amount of calories burned during an exercise from start to finish. The range is from 0.0 to 9999 KCAL. (The data is a rough guide which cannot be used in medical treatment.)
ODO (ODOMETER): Displays the total amount of distance from the first use. The range is from 0.0 to 9999 M (Miles). User also can press the MODE button to display the odometer value.
RPM: Counts each stroke within a minute. The range is from 0 to 400.
PUL (PULSE): Displays the user’s heart rate in beats per minute during exercise. (The data is a rough guide which cannot be used in medical treatment.)
NOTE: please put your hands on the pulse sensors when in PULSE function.

Note:

1. If the display appears incorrectly or becomes difficult to read, please install new batteries and try again.
2. Battery Spec: 1.5V UM-4 or AAA (2PCS).
3. Always change both batteries at the same time. Do not mix battery types and do not mix old and new batteries. Dispose batteries according to your state and regional guidelines.

MAINTENANCE INSTRUCTIONS

This is general information for daily, weekly, and monthly maintenance to be performed on your bike.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>