i Safe MOBILE IS-DC120.2 Desktop Charger For IS120.2 Instruction Manual

: June 5, 2024
: i safe MOBILE

Table of Contents

i Safe MOBILE IS-DC120.2 Desktop Charger For IS120.2
READ AND UNDERSTAND THE INSTRUCTIONS
INTENDED USE
DEVICE OVERVIEW
SAFETY
SCOPE OF DELIVERY
CHARGING
MAINTENANCE/REPAIR
DISTRIBUTION PARTNER
CLEANING
STORAGE
- RECYCLING
- TRADEMARKS
EU DECLARATION OF CONFORMITY
Documents / Resources

i Safe MOBILE IS-DC120.2 Desktop Charger For IS120.2

i Safe-MOBILE-IS-DC120.2-Desktop-Charger-For-IS120.2-

READ AND UNDERSTAND THE INSTRUCTIONS

PROTECT YOUR LIFE AND READ THE OPERATING MANUAL
This Operating Manual is part of the device IS-DC120.2. This Operating Manual provides important information for safe use of the device.

Before using the device, read this Operating Manual carefully and pay particular attention to the “Safety” section and the warnings highlighted with the warning symbol.
Make sure you have access to this Operating Manual when you need it. You can find the current Operating Manual at www.isafe-mobile.com/en/support/downloads.
Follow all instructions given on the device and on the packaging.
Follow local safety regulations.

INTENDED USE

The IS-DC120.2 is a desktop charger for charging the i.safe MOBILE IS120.2 and its battery. Only use the device as described in this Operating Manual. Any other use is considered improper and can lead to death, severe injuries and damage to the device.
The manufacturer i.safe MOBILE GmbH does not assume any liability for damage caused by improper use. The warranty expires in the event of improper use.

WARRANTY
You can find the warranty conditions at www.isafe- mobile.com/en/support/service.

EU DECLARATION OF CONFORMITY
You will find the EU declaration of conformity at the end of this Operating Manual or at www.isafe-mobile.com/en/support/downloads.

DEVICE OVERVIEW

USB INTERFACE: Connection for the Micro USB Cable.
CHARGING SLOT BATTERY
CHARGING SLOT IS120.2
STATUS LED IS120.2: Display for charging status of IS120.2.
STATUS LED BATTERY: Display for charging status of the battery.

CHARGING STATUS
The colors of the status LED on the desktop charger have the following meaning:

RED: Charging mode
GREEN: Standby or end of charging

SAFETY

Read the “Safety” section of this Operating Manual carefully before using the device. If you do not follow these instructions or do not understand them, this could lead to death, severe injuries and damage to the device.

USER
Only trained users who are qualified in the use of Ex devices in explosion hazardous areas and who have read and understood this Operating Manual may use this device.

EX-RELEVANT SAFETY REGULATIONS

Only use the device outside of explosion hazardous areas.
Only charge the IS120.2 and its battery.
Only use the Micro USB Cable supplied.
Only charge at ambient temperatures between +5 °C to +35 °C (+41 °F to +95 °F).

FURTHER SAFETY ADVICES

Use the desktop charger under dry indoor conditions only.
Do not use the desktop charger near any flammable or explosive substances.
Do not use the desktop charger in environments with much dust, humidity, or excessively high or low temperatures.
Do not expose the desktop charger to strong magnetic fields, such as are emitted from induction ovens or microwave ovens.

SCOPE OF DELIVERY

Your device packaging contains the following:

1 x IS-DC120.2
1 x Operating Manual
1 x Micro USB Cable
1 x Power Adapter universal (power supply unit and various country-specific adapters)

CHARGING

DANGER
Improper use can result in death or severe injuries! Only use the device outside of explosion hazardous areas.
Your device package contains a power supply unit, various country-specific adapters and a Micro USB Cable.

Connect the adapter suitable for your country to the power supply unit.
Connect the Micro USB Cable to the power supply unit.
Connect the Micro USB Cable to the USB interface of the desktop charger.
Connect the power supply unit to the power socket.
Put the IS120.2 or the battery into the corresponding charging slot of the desktop charger.

The respective status LED on the desktop charger changes from green to red. When the IS120.2 or battery is charged, the respective status LED on the desktop charger changes from red to green.
On the IS120.2, the status LED on the display shows the charging status.

NOTICE
Charging the IS120.2 and battery at the same time extends the charging time.

POSSIBLE DEVICE PROBLEMS
You can find information on possible device problems and how to rectify them at www.isafe-mobile.com/en/support/service under the menu item “FAQ”.
If you have any further questions, please contact the i.safe MOBILE repair service at www.isafe-mobile.com/en/support/service.

MAINTENANCE/REPAIR

The device itself has no serviceable parts.

WARNING
Incorrect repairs present a risk of explosion or fire, which can result in death or severe injuries! Do not open the device or carry out any repairs yourself. Contact the i.safe MOBILE repair service at www.isafe- mobile.com/en/support/service if the device is not working normally, if the device needs to be repaired or if a replacement part is required.

RETURN SHIPMENT
Contact the i.safe MOBILE repair service at www.isafe- mobile.com/en/support/service.

DISTRIBUTION PARTNER

You can find the specialist distribution partner responsible for your country at www.isafe-mobile.com/en/contact.

CLEANING

NOTICE
Incorrect cleaning can cause damage to the device. Please note the following when cleaning:

Disconnect the device from the power socket before cleaning.
Remove the IS120.2 or battery from the desktop charger.
Do not use chemical agents for cleaning.
Clean the device and the Power Adapter with a soft, moistened antistatic cloth.

STORAGE

NOTICE
Incorrect storage can cause damage to the device. Store the device at ambient temperatures between +5 °C to +35 °C (41 °F to +95 °F) and a humidity between 10 % to 60 %.

RECYCLING

NOTICE
Incorrect disposal of electronic products, batteries and packaging material puts the environment at risk. Please note the following when disposing of items:

DO NOT throw away batteries with household waste.
Always dispose of electronic products, batteries and packaging material at the appropriate collection points. This way, you prevent uncontrolled waste disposal and promote the recycling of material resources. You can obtain further information from regional waste disposal companies, state authorities or the i.safe MOBILE service centre responsible for your country or region at www.isafe-mobile.com/en/support/service.

TRADEMARKS

i.safe MOBILE and the i.safe MOBILE logo are registered trademarks of the
i.safe MOBILE GmbH. All other trademarks and copyrights are the properties of their respective owners.

EU DECLARATION OF CONFORMITY

according to directive 2014/35/EU, 2014/30/EU and 2011/65/EU (2015/863/EU)
The company i.safe MOBILE GmbH declares under its sole responsibility that the product to which this declaration relates is in accordance with the provisions of the following data, directives and standards:

Name & address of the manufacturer in the EU| i.safe MOBILE GmbH i_Park Tauberfranken 10
---|---
Description of the device| Desktop charger /

type / Typ : IS-DC120.2 model / Modell : MDC120A01

Conformity statement 2014/35/EU

Applied harmonized standards

| __

__

EN IEC 62368-1:2020+A11:2020

Conformity statement 2014/30/EU

Applied harmonized standards

| __

__

EN 55032:2015+A1:2020+A11:2020 EN 55035:2017+A11:2020