Birdfy A3 Hum Feeder User Manual
- July 16, 2024
- Birdfy
Table of Contents
- What’s in the Box
- Camera Charging
- Turning the Camera On & Off
- Pre-Installation Notes
- Al Bird Identification
- Frequently Asked Questions
- Q1: What Wi-Fi does Birdfy Hum Feeder support and how far can it reach?
- Q2: Does it support SD/TF cards?
- Can multiple users connect to Birdfy Hum Feeder?
- Can I wash Birdfy Hum Feeder with a dishwasher?
- How often should I clean the feeder?
- Warning
- Contact us at:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Birdfy A3 Hum Feeder User Manual
What’s in the Box
-
Feeder & cameras
-
Large brush
-
Mini brush
-
S hook
-
Ejector pin
-
Quick Guide
-
User Manual
-
Silicone seal
-
Spout cover
-
Ant moat for solar panel
-
Type-C charging cable
-
Solar panel + installation package
Please note that if you have purchased the no-solar bundle, the package will not include a solar panel or the ant moat for solar panel.
Camera Charging
The camera does not come fully charged due to safety regulations. Before using
it for the first time, please charge it for 10 hours with the charging cable
inside the box (DC5V / 2A).
Status light is flashing red : charging
Status light is solid red : fully charged
Turning the Camera On & Off
Powering on or off: Long press the power button at the back of the camera.
Pre-Installation Notes
- Keep Birdfy Hum Feeder and all accessories out of the reach of children and pets.
- Make sure the camera is fully charged (DC5V/2A).
- Working temperature: -10°C to 50°C (14°F to 122°F) Working relative humidity: 0-90%
- Please avoid exposing the camera lens to direct sunlight.
- The camera has an IP66 waterproof rating, which allows it to function properly in rainy or snowy conditions. However, it should not be submerged in water.
Note:
- Birdfy Hum Feeder only works with 2.4GHz Wi-Fi.
- Strong light may interfere with the device’s ability to scan QR codes.
- Avoid placing the device behind furniture or near a microwave oven. Please try to keep it in the range of your Wi-Fi signal.
Al Bird Identification
Birdfy Hum Feeder is capable of detecting and identifying the species of
visiting hummingbirds. This feature is completely free and activated
automatically once your feeder starts working.
Learn more on my.birdfy.com
Frequently Asked Questions
Q1: What Wi-Fi does Birdfy Hum Feeder support and how far can it reach?
A1: Birdfy Hum Feeder supports 2.4GHz Wi-Fi. It can be placed up to 100 meters away from the Wi-Fi router, provided there are no obstacles between them.
Q2: Does it support SD/TF cards?
: No, Birdfy Hum Feeder does not support SD/TF cards as we offer free cloud storage with a 30-day data retention period. You don't need to spend extra money on a TF card and can conveniently view bird photos and videos.
Can multiple users connect to Birdfy Hum Feeder?
: Yes, you can share the camera with your friends and family members. However, one camera can only be owned by one account.
Can I wash Birdfy Hum Feeder with a dishwasher?
: No, the Birdfy Hum Feeder cannot be washed with a dishwasher as the heat may damage the materials. We have provided cleaning brushes for you to wash it manually.
How often should I clean the feeder?
: Bacteria tend to thrive in warm environments. Therefore, we recommend cleaning the feeder daily in hot weather.
Warning
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two CONDITIONS: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications made without explicit approval from the
responsible party in compliance may result in the user being unauthorized to
operate the device.
This device meets the FCC radiation exposure limits for uncontrolled
environments. To ensure safe installation and operation, maintain a minimum
distance of 20cm between the radiator and your body.
CE Statement
The information provided on the packaging is allowed to identify geographical
areas within the member states where restrictions on use or requirements for
authorized use exist, if applicable.
The structure of the product allows it to be used in at least one member state
without violating applicable requirements for the use of radio spectrum.
Manufacturer information:
NETVUE INC.
1055 East Colorado Boulevard 5th Floor Pasadena, CA, 91106
Contact us at:
In-App Chat
1(886)749-0567
Mon-Fri, 9am-5pm, PST
@birdfy by NetVu