i safe MOBILE M33A01 IS330.RG Cell Phone User Manual
- June 5, 2024
- i safe MOBILE
Table of Contents
i safe MOBILE M33A01 IS330.RG Cell Phone
INSTRUCTIONS
READ AND UNDERSTAND THE INSTRUCTIONS
PROTECT YOUR LIFE AND READ THE OPERATING MANUAL
This Operating Manual is part of the device IS330.RG (model M33A01). This
Operating Manual provides important information for safe use of the device.
-
Before using the device, read this Operating Manual carefully and pay particular attention to the “Safety” section and the warnings highlighted with the warning symbol.
-
Also read the Safety Instructions before using the device.
-
You can find these at www.isafe-mobile.com/en/support/downloads
-
Make sure you have access to this Operating Manual when you need it. You can find the current Operating Manual at www.isafemobile.com/en/support/downloads
-
Follow all instructions given on the device and on the packaging.
-
Follow local safety regulations.
INTENDED USE -
The IS330.RG is an Internet-capable communication device for industrial use.
-
Only use the device as described in this Operating Manual. Any other use is considered impro-per and can lead to death, severe injuries and damage to the device.
-
The manufacturer i.safe MOBILE GmbH does not assume any liability for damage caused by improper use. The warranty expires in the event of improper use.
WARRANTY
You can find the warranty conditions at www.isafe-
mobile.com/en/support/service
For any damage caused by computer viruses that you download while using the
Internet functions responsibility is at your hand.
There is no right of recourse against i.safe MOBILE GmbH.
EU DECLARATION OF CONFORMITY
You will find the EU declaration of conformity at www.isafe-
mobile.com/en/support/downloads
FCC/IC STATEMENT
The FCC/IC declaration can be found at www.isafe-
mobile.com/en/support/downloads
DEVICE OVERVIEW/FUNCTIONS
- POWER KEY: A long press switches the device on/off. A short press switches the stand-by mode on/off.
- SIDE KEY LEFT: Optional function – function can be assigned via Button App (system integrated).
- LOUDNESS CONTROL: Volume up/Volume down.
- USB INTERFACE: Connection for the USB-C Cable or for connection to other devices. Also see sections “Charging” and “Connecting approved accessories”.
- KEYPAD
- FUNCTION KEY: Optional function – function can be assigned via Button App (system integrated).
- ISM INTERFACE: Connection for approved accessories. Also see section “Connecting approved accessories”.
- FRONT CAMERA
- SOS KEY: A long press of the SOS key sends an emergency call to a pre-saved emer-gency number (only in connection with a Lone Worker Protection app).
- TOUCHSCREEN
- EYELET: Eyelet for hand strap.
- BACK CAMERA
- LED FLASH
- CHARGING CONTACT
- MICROPHONE: Noise cancelling microphone/hands-free microphone.
SAFETY
Read the “Safety” section of this Operating Manual carefully before using the
device. If you do not follow these instructions or do not understand them,
this could lead to death, severe injuries and damage to the device.
USER
Only trained users who have read and understood this Operating Manual may use
this device.
USE OUTSIDE OF EXPLOSION HAZARDOUS AREAS
DANGER
Improper use can result in death or severe injuries!
- Do not use the device in explosion hazardous areas.
- Make sure that no gap can be seen between the two halves of the device.
- Do not use the device in places where its use is prohibited.
- Turn off the device in clinics or other medical facilities.
- Always keep a safety distance of at least 15 cm between the device and a pacemaker or hearing aid. The device can affect the functioning of medical devices such as pacemakers and hearing aids.
- When using the device while driving a motor vehicle, be sure to comply with applicable national laws.
- Make sure you prevent the user errors described in the section entitled “Possible User Errors”. Only charge the device as described in the “Charging” section.
CAUTION
When using earphones or headsets at the maximum volume setting, you can damage
your hearing.
- First set the volume control on the device to 50 % of the maximum volume. Gradually adjust the volume.
NOTICE
Incorrect use can damage the device.
- Only use accessories approved by i.safe MOBILE, as described in the section on “Connecting approved accessories”.
- Protect the device and the Power Adapter from strong electrical magnetic fields as for examp-le those emitted by induction cookers or microwave ovens, for example.
- Do not touch the display with sharp objects.
POSSIBLE USER ERRORS
DANGER
Improper use can result in death or severe injuries! Follow the instructions
below:
- Do not modify the device structurally.
- Do not expose the device to high temperatures.
- Do not expose the device to strong UV radiation.
- Do not expose the device to processes with high electrical charges. Do not expose the device to aggressive acids or bases.
SCOPE OF DELIVERY
Your device packaging contains the following:
- 1 x IS330.RG
- 1 x Battery
- 1 x Quick Start Manual
- 1 x Safety Instructions
- 1 x Display Protection Foil
- 1 x USB-C Cable
- 1 x Power Adapter universal (power supply unit and various country-specific adapters)
- 1 x Torx Screwdriver
- 1 x Display cleaning cloth
CELL BROADCAST
The device supports cell broadcast. Cell broadcast is a cellular service for
sending messages to all recipients within a cell.
INSTALLING THE BATTERY
Place the battery in the battery compartment as shown. Hand-tighten the screws
using the Torx Screwdriver provided. Check that the battery is seated
correctly and securely.
INSERT/REMOVE SIM CARD
NOTICE
Proceeding incorrectly when inserting/removing the SIM card can damage the
device and the SIM card. Switch off the device before inserting or removing a
SIM card. Do not charge the device while inserting or removing a SIM card.
Loosen the screws on the battery using the Torx Screwdriver provided. Remove
the battery from the battery compartment.
- Insert the SIM card into the slot. The device has two slots for one SIM card each. The slots are marked “SIM 1” and “SIM 2”.
- If you have inserted two SIM cards, select a favorite card. Information on operating the device can be found at www.isafe-mobile.com/en/support/service under the menu item „FAQ“.
- Reinstall the battery. See section “Installing the battery”.
INSERT/REMOVE microSD CARD
NOTICE
Proceeding incorrectly when inserting/removing the microSD card can damage the
device and the microSD card. Switch off the device before inserting or
removing a microSD card. Do not charge the device while inserting or removing
a microSD card.
Loosen the screws on the battery using the Torx Screwdriver provided.
Remove the battery from the battery compartment.
Insert the microSD card into the slot provided. The device has a slot for a
microSD card up to 128 GB. The slot is marked “microSD”.
Reinstall the battery. See section “Installing the battery”.
CHARGING
DANGER
Improper use can result in death or severe injuries! Do not charge the device
in the vicinity of flammable substances.
NOTICE
Incorrect charging can cause damage to the device. Please note the following
when charging:
- Only charge the device at ambient temperatures between +5 °C to +35 °C (+41 °F to +95 °F). Charge the device under dry indoor conditions only.
- Do not charge the device in environments dusty or humid.
Your device package contains a power supply unit, various country-specific adapters and an USB-C Cable.
- Connect the adapter suitable for your country to the power supply unit.
- Connect the USB-C Cable to the power supply unit.
- Connect the USB-C Cable to the USB interface of the device.
SWITCHING ON/OFF
Press and hold the on/off key for about 3 seconds.
Enter the device or SIM PIN when the input dialog for the device or SIM PIN
appears after switching on.
Select the
USING THE DEVICE
When turning on the device for the first time, follow the instructions on the
screen.
Further information on operating the device can be found at
www.isafe-mobile.com/en/support/service under the menu item “FAQ”.
Detailed information on operating the Android operating system can be found
at: https://support.google.com/android
CONNECTING APPROVED ACCESSORIES
Only connect accessories approved by i.safe MOBILE to the device. Accessories
approved by i.safe MOBILE can be found at
www.isafemobile.com/en/products
Approved accessories can be connected to any ISM interface and to the USB interface.
ISM INTERFACE
Loosen the screw on the ISM interface cover using the Screwdriver provided and
remove the cover as shown. The Screwdriver is included in the accessory
package. Connect the plug of the approved accessory to the ISM interface as
shown. Hand-tighten the screws using the Screwdriver provided.
Check that the plug is seated correctly and securely.
USB INTERFACE
The USB interface is used for charging and data transfer. Connect approved
accessories or other devices to the USB interface only by using the USB-C
Cable.
CHANGING THE BATTERY
An approved replacement battery can be found on the website www.isafe- mobile.com/en/products
Loosen the screws on the battery using the Torx Screwdriver provided. Remove
the battery from the battery compartment as shown.
Place the approved replacement battery in the battery compartment as shown.
Hand-tighten the screws using the Torx Screwdriver provided.
Check that the battery is seated correctly and securely.
POSSIBLE DEVICE PROBLEMS
You can find information on possible device problems and how to rectify them
at www.isafe-mobile.com/en/support/service under the menu item “FAQ”.
If you have any further questions, please contact the i.safe MOBILE repair
service at www.isafe-mobile.com/en/support/service
MAINTENANCE/REPAIR
The device itself has no serviceable parts.
WARNING
Incorrect repairs present a risk of explosion or fire, which can result in
death or severe injuries! Do not open the device or carry out any repairs
yourself.
Contact the i.safe MOBILE repair service at www.isafe- mobile.com/en/support/service if the device is not working normally, if the device needs to be repaired or if a replacement part is required.
RETURN SHIPMENT
Contact the i.safe MOBILE repair service at www.isafe-
mobile.com/en/support/service
DISTRIBUTION PARTNER
You can find the specialist distribution partner responsible for your country
at www.isafe-mobile.com/en/contact
CLEANING
NOTICE
- Incorrect cleaning can cause damage to the device. Please note the following when cleaning:
- Turn off the device before cleaning.
- Do not charge the device while cleaning.
- Do not use chemical agents for cleaning.
- Clean the device and the Power Adapter with a soft, moistened antistatic cloth.
- Clean the display screen regularly with a soft, antistatic cloth.
STORAGE
NOTICE
Incorrect storage can cause damage to the device. Store the device at ambient
temperatures between +5 °C to +35 °C (+41 °F to +95 °F) and a humidity between
10 % to 60 %.
RECYCLING
NOTICE
Incorrect disposal of electronic products, batteries and packaging material
puts the environment at risk. Please note the following when disposing of
items:
DO NOT throw away batteries with household waste.
Always dispose electronic products, batteries and packaging material at the
appropriate collection points. This way, you prevent uncontrolled waste
disposal and promote the recycling of material resources.
You can obtain further information from regional waste disposal companies,
state authorities or the i.safe MOBILE service centre responsible for your
country or region at www.isafe-mobile.com/en/support/service
TRADEMARKS
i.safe MOBILE and the i.safe MOBILE logo are registered trademarks of the
i.safe MOBILE GmbH.
EEA Version: Comes with the Google™ app and Google Chrome™
Google and Google Play are trademarks of Google LLC.
All other trademarks and copyrights are the properties of their respective
owners.
Document No. 1044MM10REV00 Version: 2022-05-10
(c) 2022 i.safe MOBILE GmbH
i.safe MOBILE GmbH
i_Park Tauberfranken 10 97922 Lauda-Koenigshofen
Tel. +49 9343 60148-0
info@isafe-mobile.com
www.isafe-mobile.com
References
- AT&T Official Site | Our Best Wireless & Internet Service
- Zertifizierte Smartphones, Tablets und Mobiltelefone für IECEx und ATEX Zonen
- ATEX und IECEx zertifizierte Geräte – i.safe MOBILE
- Wir beraten Sie weltweit
- Ex-geschützte Kommunikationsgeräte ATEX/IECEx-zertifiziert
- Betriebsanleitungen, Produktflyer, Datenblätter uvm.
- Service & Support
- We advise you worldwide
- Ex devices for ATEX IECEx Zone 1/21
- Service and Support – i.safe MOBILE
- Datasheets, Manuals, Certificates and Product Folders
- Our service team will be happy to assist you
- I.SAFE MOBILE À L'ÉCHELLE MONDIALE
- Appareils ATEX i.safe MOBILE pour zones de protection antidéflagrante
- Service chez
- Support - Official i.safe MOBILE Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>