OWill ZYZ-HOJIN-BP3 Electric Balloon Pump Instruction Manual

ELECTRIC Balloon Pump
READ FOLLOWING
INSTRUCTIONS AND
WARNINGS BEFORE USE

73005 AC:110V-120V

IMPORTANT

1. Power supply must be AC 110V-120V.
2. This is a high-volume pump. Please use this pump continuously no more than 10 minutes, otherwise, it can overheat and damage the pump.
3. Keep the pump out of the reach of children.
4. Do not obstruct the inflation port & blowhole and keep them ventilated all the time.

WARNING

1. Never leave pump unattended while the pump is in use.
2. Do not keep/use the pump in wet condition.
3. Never allow sands, small rocks, etc. to be sucked into inflation port & blowhole when using the pump.
4. Never look inside or point the inflation port & blowhole towards your eyes when the pump is working.
5. Never attcmpt to put hand or fingers into the inflation port& blowhole at any time.

TOINFLATE BALLOONS

Connect plug to AC110V-120V socket.
Operation 1:
Pinch the edge of the balloon with the fingers first, and cover the inflation port with the balloon; then press the inflation port slingtly to inflate the balloon and release the inflation port to stop.
Operation 2:
For inflating the balloons continuously, please switch on, then cover the inflation port with balloon to inflate; and switch off to stop.
Remarks:
※ The symbol “-” on the switch means “on” , “0” means “off”
※ When inflating with operation 2, it is unnecessary to press the inflation port.
※ Operation 1 is suitable for inflating single or few balloon, and Operation 2 is suitable for inflating many balloons continuously.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>