FORCE1 Scoot Skeet Green Single User Manual

USER MANUAL GET STARTED WITH
OUR QUICK START GUIDE
FLY ME NOW.
I’LL SHOW YOU HOW!

FOR MORE INFORMATIONFOR MORE INFORMATION
Visit us on line at Visit us on line at force1rc.comforce1rc.com for product information, replacement parts, and flight tutorial for product information, replacement parts, and flight tutorial

http://force1rc.com/scoot
force1rc.com/

IMPORTANT STATEMENT

Thank you for buying a Force1 drone. Please read this manual carefully before operating the drone. Your purchase implies you have read this manual and agree to follow all guidelines and instructions herein.

1. Please operate in a safe manner. We undertake no liability for human injury or property damage caused by improper operation, as we have no control over setup, use and operation of this drone.
2. This drone is suitable for experienced RC drone users aged 8 years or above. Not safe for users under the age of 8 to use.
3. The flying field must be legally approved by your local government. If you have any questions about use, operation, technical support, repair, after-sale service, etc.
   Forcel does not assume any responsibility for any accidents caused by using non-genuine parts and accessories. Keep the packaging and user manual for future reference.
   Email us at support@force1rc.com for questions, comments or to request spare parts.

SAFETY PRECAUTIONS

This drone is suitable for experienced drone users aged 8 years or above. This product contains small parts; please keep out of reach of small children. Please pay special attention to the following safety procedures:

1. Keep away from humid environment
   The drone is made of a precise electronic component. Humidity or water vapor may damage electronic components causing accidents.

2. Keep away from rotating parts
   Rotating parts can cause serious injury and damage. Keep face and body away from rotating motors.
   Tie hair back, wear a hat or hood to avoid entanglement and injury.

3. Keep away from heat
   The drone is made of metal fiber, plastic, electronic components, etc. Keep away from heat and direct sunlight to avoid distortion and damage.

4. Stay aware while operating this drone
   Avoid areas with sudden changes in elevation, uneven ground or dangerous obstacles.
   For indoor use only, flying outdoors can result in a lost drone.

IMPORTANT SAFETY NOTICE FOR DRONE CARE

• Heat is a known factor in battery fires; if a battery is pushed beyond 60°C/140°F during use or charging, problems could occur due to metallic lithium generation that can damage the cell
• Store upright and do not rest objects against the drone
• Do not use if drone is punctured or damaged
• Do not expose the drone to water
• Do not leave the drone in direct sunlight
• Please use caution when in the presence of children or animals
  This drone contains a rechargeable internal lithium polymer (LI-Po) battery. Please do not attempt to remove, disassemble, replace or repair the battery after expiration of the battery.
  Please contact customer support if you observe swelling in the engine assembly.

GUIDELINES FOR LI-PO BATTERY-POWERED DEVICES

• Never overcharge a Li-Po battery
• Do not charge Li-Po batteries near flammable materials or liquids
• Keep Li-Po batteries away from children and animals
• Never use or charge a Li-Po battery that has ballooned or swelled
• Never use or charge a Li-Po battery that has been punctured or damaged

WARNING:
DO NOT LEAVE BATTERY CHARING UNSUPERVISED

DRONE CHARGING SAFETY GUIDELINES

• Do not leave the drone unsupervised when charging
• Make sure there is no short circuit of the power wire
• Please use the recommended charger only. Do not charge on a gaming console. Only use your computer’s USB port, power bank or phone wall charger to charge the battery
• To avoid trickle charging, always unplug the drone from the USB charger when storing or leaving unattended
• Check the charger’s wire, plug, and surface regularly. Do not use a broken charger
• When drone is fully charged, do not try to charge further until it has been partially or fully discharged
• Leave time between charging and using the drone
• Do NOT overcharge the drone. It may cause overheating and in turn this overheating could damage the battery or melt/burn internal surfaces when charging
• Never try charging the drone if you feel the battery has been damaged, you run the risk of fire
• Cells that are obviously swollen or have physical damage should never be used, and careful disposal is required, especially if the cells are swollen; check the engine assembly of the drone for swelling

Email us at support@force1rc.com for questions, comments or to request spare parts

DRONE CALIBRATION INSTRUCTIONS

Follow these steps to calibrate your drone

• Turn the power switch on
• The center light will flash, When the center light turn solid green, shake the drone back and forth 3 to 5 times
• After shaking, the center light will flash, indicate the drone is in calibration mode
• Place the a flat surface while calibrates
• The drone is calibrated when the center light turns solid green

DRONE CHARGING INSTRUCTIONS

• Begin by turning the drone OFF. Connect drone to USB port with the USB charging cable and choose a charging method pictured below
• The USB chargers LED light will turn red when charging and off when fully charged.
  Charge time is approximately 50-60 minutes

LI-PO BATTERY DISPOSAL & RECYCLING
Contact your local electronics recycling facility for more information about how to recycle Li-Po battery-powered products.
WARNING:
DO NOT LEAVE BATTERY CHARGING UNSUPERVISED

BOX CONTENTS

DRONE OVERVIEW

OPERATION INSTRUCTIONS

HOW DOES SCOOT FLY? WHAT’S SCOOT DOING NOW?

FLIGHT DIRECTION CONTROLS

HOW IS SCOOT CONTROLLED? CAN SCOOT GO HIGHER?

FLIGHT DIRECTION CONTROLS
HOW DOES SCOOT STOP? WHAT ELSE TO KNOW ABOUT SCOOT? HOW TO MAKE FLIP?

TROUBLESHOOTING GUIDE

Page 9.”
Why doesn’t charge?| “Start by ensuring I am turned off prior to charging. My USB plug will turn red when it’s plugged into a power source; the light will stay on while I’m charging. When I’m fully charged, the light on the USB will turn off.”
Why does crash?| “I don’t mean to! Make sure you ore in a spacious room, I con easily change direction when I sense on obstacle. If the space is too small, I might try to change directions too quickly. I may also need to be calibrated. Instructions for this are on Page 7.”
What if goes too fast?| “I always try to avoid any obstacles: walls, furniture, people, solid objects. Sometimes, I like to zoom! Make sure the room we’re in has a good amount of airspace for my flight path.”
How durable is ?| “I’m pretty tough, but please be gentle! A little toss is all it takes to launch me. “Catch” me out of the air quickly and turn me upside down to stop me. Always make sure you’re in a safe, dear flight area before relaunching me.”
Where can fly?| “I like to explore, but I can get pretty adventurous! I’m at my best indoors, with plenty of space.”
Can ‘s performance be improved?| “If you need to adjust my flight control, check out the calibration section on Page 7.”

LEARN MORE ABOUT !
force1rc.com/

BLASTER INSTRUCTION

• Use the blaster when you want to play the Skeet game with your Scoot drones!
• Make sure your blaster has new AAA batteries and your Scoot drones are fully charged in order to get the most out of your game!
• Turn the Scoot drones and blaster on
• The blaster starts off in “blast mode”
• Press the “mode” button on the blaster to change it to “take off mode”. The red light on the blaster will now slow flash red.
• Point the blaster at each of the drones and press the trigger button to make the Scoots fly up.
• Press the “mode” button on the blaster to switch to “blast mode”.
• Point towards the bottom section of the Scoot drone and pull the trigger. If you have accurate aim, the Scoot will fall and the center light will turn from green to red.
  Scoot will flash multicolor and the blades start spinning when Scoot takes off.

BLASTER OVERVIEW

WARRANTY

LIMITED 90-DAY WARRANTY AND FREE LIMITED REPLACEMENT PARTS FOR 90 DAYS
Force1rc.com warrants to the original buyer only that its products will be free from defects in material and workmanship for ninety (90) days from the date upon which the product is shipped, either directly from Force1rc.com or from an Authorized Reseller’s location, to the buyer.
The following conditions must be met to be eligible for warranty coverage:

1. During the warranty period product is used as intended by the manufacturer.
2. The Product has not been disassembled or modified.
3. The labels and serial numbers show no signs of tampering or altering.
4. Buyer has a warranty code obtained by registering their product online prior to making a claim.

EXCEPTIONS: THE LIMITED WARRANTY SHALL NOT APPLY TO:

• Damage caused by normal wear and tear
• Accident, negligence, abuse, misuse, misapplication or willful damage by buyer (or its agents), or acts of nature
• Crash or burning caused by non-manufacturing factors
• Damage caused by unauthorized modification or disassembly not authorized by the instruction manual
• Damage caused by incorrect use or operation
• Damage caused by mismatch or misuse of battery or charger
• Failure of the operator to follow the operating instruction or use outside the products operating parameters
• Damage caused by operating the product in poor weather (i.e., strong wind, rain, low visibility, etc.)
• Damage caused by operating the product in or around electromagnetic interference (i.e., radio trans-mitting tower high-voltage wire, substation, etc.)
• Damage caused by operating the product where there may be interference caused by other wireless devices
• Operating the product with a load capacity in excess of the safe weight listed in the manual
• Operating the product with aged, damaged or unauthenticated third-party components
  Operating the product with a defective battery

PROCEDURE: Any claims for breach of the foregoing limited warranty shall only be valid if buyer makes such claim in writing within ninety (90) days of the date of shipment of the product to which the claim relates. To make a warranty claim, please email warranty@force1rc.com with your full name, address, phone number, order number, drone type, part type and purchase date and product issue.
LIMITED REMEDY: Force1rc.com’s sole liability, and buyer’s sole remedy, for any breach of the foregoing warranty shall be at Force1rc.corn’s option, to (i) exchange the product with a new product or a refurbished product that is functionally equivalent to the original product, or (ii) issue a credit or refund for the purchase price of the product. Any replaced products shall be warranted as set forth herein, provided that the period within which buyer may make further claims shall be limited to the remainder of the original period for the applicable product or 90 days, whichever is longer (although the warranty period shall be suspended during any period of replacement).
DISCLAIMER: THE WARRANTY AND REMEDIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, AND FORCE1 RC.COM DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT AND ANY WARRANTIES ARISING OUT OF COURSE OF DEALING, COURSE OF PERFORMANCE AND TRADE USAGE. FORCE1 RC. COM IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL OR ANTICIPATED PROFITS (INCLUDING LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED SAVINGS; LOSS OF BUSINESS; LOSS OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF REPUTATION; LOSS OF, DAMAGE TO, COMPROMISE OR CORRUPTION OF DATA; OR ANY INDIRECT OR CONSEQUENTIAL LOSS OR DAMAGE HOWSOEVER CAUSED INCLUDING THE REPLACEMENT OF EQUIPMENT AND PROPERTY, ANY COSTS OF RECOVERING OR REPRODUCING ANY DATA STORED IN OR USED WITH THE PRODUCT OR ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF INFORMATION STORED IN THE PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. In addition, some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
FREE REPLACEMENT PARTS FOR 90 DAYS: Force1rc.com shall also make available any spare part needed for registered drones free of charge for 90 days from the date of purchase, with the exception of batteries, motors, circuit boards, cameras and transmitters. Shipping charges may apply. Limit one part type request per registered drone (e.g., registrants are entitled to one extra set of propellers per registered drone). To request spare parts, please email warranty@force1rc.com with your warranty code, drone name/model, current shipping address, purchase date and part type.
GET YOUR WARRANTY CODE AT forco1rc.com/pages/warranty- signup HAVE YOUR ORDER NUMBER AND/OR DRONE UPC READY

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide residential protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not Installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. Which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on the circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.

FCC WARNING
The equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. Modifications not authorized by the manufacturer may void user’s authority to operate this device.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

force1rc.comwww.force1rc.com

References

• Force1 RC - Online Store For Drones, RC Boats, Cars, & More
• Force1 RC - Online Store For Drones, RC Boats, Cars, & More
• Robinson+Cole
• Force1 RC - Online Store For Drones, RC Boats, Cars, & More

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>