i Safe MOBILE M53A01 IS530.RG Smartphone Instruction Manual
- June 5, 2024
- i safe MOBILE
Table of Contents
i Safe MOBILE M53A01 IS530.RG Smartphone
SAFETY INSTRUCTIONS
INFORMATION CONCERNING SAR CERTIFICATION
(SPECIFIC ABSORBATION RATE)
Maximum SAR values for this model and the conditions under which these were
determined:
- SAR (head) 0.81 W/kg
- SAR (body – worn) 1.54 W/kg
This device was tested for typical body-worn operations with the back of the handset kept 5 mm from the body. The device complies with RF specifications when the device used at 5 mm from your body.
- The product shall only be connected to a USB interface of version USB2.0.
- Adapter shall be installed near the equipment and shall be easily accessible.
NB WARNING
CAUTION
Use careful with the earphone maybe possible excessive sound pressure from
earphones and headphones can cause hearing loss.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
- Operation temperature: -20°C …+60°C (EN/IEC 60079-0)/ -10°C …+50°C (EN/IEC 62368-1).
The device shall only be connected via accessory authorised by i.safe MOBILE GmbH.
AC Adapter:
Approved external adapter model ICP12-050-2000B (Input: AC100-240V 50/60Hz
0.3A; Output: 5VDC, 2A) or other approved external AC/DC adapter which
complies with the requirements of LPS (Limited Power Source) and has output
rated 5VDC/2A.
Adapter shall be installed near the equipment and shall be easily accessible. The plug is considered independent of the adapter.
The device complies with RF specifications when the device used at 0.5 cm from
your body.
The i.safe MOBILE GmbH hereby declares that this smart phone is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU. This informati-on has to be presented in such a way that the user
can readily understand it. Typically, this will necessitate translation into
every local language (required by national consumer laws) of the markets where
the equipment is intended to be sold. Illustrations, pictograms and using
inter-national abbreviations for country names may help reduce the need for
translation.
Restrictions in the 5 GHz band
According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE),-Bulgaria (BG), the Czech Republic (CZ),Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain(ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania(LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria(AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK),Finland (FI), Sweden (SE), the United Kingdom (UK), Turkey (TR), Norway(NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI). The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.
| AT | BE | BG | CH | CY | CZ | DE | |
|---|---|---|---|---|---|---|---|
| DK | EE | EL | ES | FI | FR | HR | |
| HU | IE | IS | IT | LI | LT | LU | |
| LV | MT | NL | PL | PT | RO | SE | |
| SI | SK | TR | UK |
EU-DECLARATION OF CONFORMITY
EU – Declaration of Conformity
EU – Konformitätserklärung
according to directive 2014/53/EU and 2011/65/EU (2015/863/EU)
The company i.safe MOBILE GmbH declares under its sole responsibility that the
product to which this declaration relates is in accordance with the provisions
of the following data, directives and standards:
Name & address of the manufacturer in the EU Name & Anschrift des Herstellers innerhalb der europäischen Gemeinschaft| i.safe MOBILE GmbH i_Park Tauberfranken 10
97922 Lauda – Koenigshofen
Germany
---|---
Description of the devices
Beschreibung der Geräte
| Smartphone
Smartphone
type / Typ : IS530.RG & IS-HS1.1
model / Model : M53A01
Conformity statement 2014/53/EU issued by| PHOENIX TESTLAB GmbH
Konformitätsaussage 2014/53/EU ausgestellt| Koenigswinkel 10
durch| 32825 Blomberg
| Germany
| identification number / Kenn-Nummer : 0700
Applied harmonized standards| EN 62368-1:2014+A11:2017;
Angewandte harmonisierte Standards| EN 50332-1:2013;
| EN 50332-2:2013;
| EN 50360:2017;
| EN 50566:2017;
| EN IEC 62311:2020;
| EN 62479:2010;
| EN 50663:2017;
| EN 62209-1:2016;
| EN 62209-2:2010+A1:2019;
| ETSI EN 301 489-1 V2.2.3;
| ETSI EN 301 489-3 V2.1.1;
| ETSI EN 301 489-17 V3.2.4;
| ETSI EN 301 489-19 V2.1.1;
| Draft ETSI EN 301 489-52 V1.1.0;
| EN 55032:2015+A11:2020;
| EN 55035:2017+A11:2020;
| ETSI EN 301 511 V12.5.1;
| ETSI EN 301 908-1 V13.1.1;
| ETSI EN 301 908-2 V13.1.1;
| ETSI EN 300 328 V2.2.2;
| ETSI EN 301 893 V2.1.1;
ETSI EN 300 440 V2.2.1;
ETSI EN 300 330 V2.1.1;
ETSI EN 303 413 V1.1.1
---|---
Conformity statement 2015/863/EU amending| SGS-CsTC Standards Technical
Services Co.,
2011/65/EU issued by| Ltd.
Konformitätsaussage 2015/65/EU ergänzt| 198 Kezhu Road,
2011/65/EU ausgestellt durch| Scientech Park Guangzhou Economic &
| Technology Development District,
| Guangzhou, China 510663
Applied harmonized standards| IEC 62321-2: 2013; IEC 62321-1: 2013;
Angewandte harmonisierte Standards| IEC 62321-3-1: 2013; IEC 62321-5:
2013;
| IEC 62321-4: 2013 + A1: 2017;
| IEC 62321-7-1: 2015;
| IEC 62321-7-2: 2017 & ISO 17075-1: 2017;
| IEC 62321-6: 2015;
| IEC 62321-8: 2017
CE Marking
CE-Kennzeichnung
|