moa VC85G 900W Vacuum Cleaner Instruction Manual
- June 5, 2024
- moa
Table of Contents
moa VC85G 900W Vacuum Cleaner Instruction Manual
BEFORE USE
Before use, please read this manual carefully.
Only connect the appliance to an earthed wall socket.
This appliance is for household use only. When using electrical appliances, basic safety precautions should always be followed to avoid fires, electric shocks, burns, or other injuries and damage. Read these operating and safety instructions carefully.
IMPORTANT SAFEGUARDS
When using your vacuum, basic safety precautions should always be observed, including the following.
- Do not leave the vacuum cleaner unattended when it is plugged in. Unplug from outlet when not in use and before pulling filters out.
- To reduce the risk of electric shock do not use outdoors or on wet surfaces.
- Do not allow children to use it as a toy. Close attention is necessary when used near children.
- Use only as described in this manual. Use only the manufacturer’s recommended attachments.
- Do not use with damaged cord or plug. Do not use a vacuum cleaner if it has been dropped damaged left outdoor or dropped into water. Return appliance to the appliance customer service for examination repair or adjustment.
- Do not pull or carry by the cord. Do not use the cord as a handle. Close a door on the cord, or pull the cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
- Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
- Do not handle plug or vacuum cleaner with wet hands. Dot not use outdoors or on wet surfaces.
- Do not put any objects into openings. Do not use with any openings blocked and do not restrict airflow. Keep all openings free of dust, lint, hair, and anything that may reduce airflow.
- Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
- Do not pick up hard or sharp objects such as glass nails, screws, coins, etc.
- Do not pick up hot coals, cigarettes, matches, or any hot, smoking, or burning objects.
- Do not use without filters in place.
- Turn off all controls before plugging or unplugging the vacuum cleaner.
- Use extra care when vacuuming on stairs.
- Do not pick up flammable or combustible materials (lighter fluid, gasoline, etc.) or use them in the presence of explosive liquids or vapor.
- Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.)
- Do not in an enclosed space filled with vapors given off by oil-based paints, paint thinner, mothprooling, flammable dust, or other explosive or toxic vapors.
- Always unplug this appliance before connecting or disconnecting the vacuum hose. Do not allow the plug to whip when rewinding.
- Use only on dry, indoor surfaces.
- Do not use for any purpose other than described in this user’s guide.
- Store your appliance indoor in a cool, dry area.
- Keep your work area well dry.
- Do not immerse the hand vacuum into water or other liquids.
- Keep the end of the hose, wands, and other openings away from your lace and body.
- Do not use the cleaner to clean your pets or any animal.
- Keep the head (eyes, ear, mouth, etc.) away from the openings, when the cleaner is working or plugging.
WARNING
If the suction opening of the unit, the hose, or the tube is blocked, switch off the vacuum cleaner and remove the blocking substance before you start the unit again.
- Do not operate the vacuum cleaner too close to the heater or radiators.
- Before inserting the power plug into the wall outlet, make sure that your hands are dry.
- Before you start the unit, make sure to remove large or sharp objects that might damage the dust tank and hose.
- When pulling out the power plug from the wall outlet, pull the plug, not the power cord.
- Do not use without all filters in place.
- When using, if you learn of squeak from the cleaner, it must be suction appears to be reduced, so you must stop (make sure the cleaner is not plugging), then clean the all air filter.
- Hold the plug when rewinding the cord. Do not allow the cord to whip when rewinding.
Note : If the supply cord is damaged, it must be replaced by a manufacture, service agent, or similarly qualified person in order to avoid a hazard.
ASSEMBLING VACUUM CLEANER
Note : Always remove the power plug from the wall outlet before assembling or removing accessories.
- Attaching the Flexible Hose into the vacuum connect the flexible hose into the air intake duct, push in until you hear a “click”, indicating it is in its locked position.
- Fitting the tube to the curved wand/hose extension. Push the tube into the curved wand/hose extension.
- Fitting the Floor Brush to the tube. Push the tube into the floor brush. Adjust the tube to the desired length.
BUTTON FUNCTION
Note : Once all attachments are in place, unwind a sufficient length of cable and insert the plug into the wall outlet. A yellow mark on the power cord shows the ideal cable length. Do not pull the power cord beyond the red mark.
- Insert the power plug into the wall outlet.
- Press the power on/off button located in the unit to turn the vacuum cleaner “on”.
- To rewind the power cord, press the cord rewind button with one hand and guide the power cord with the other hand to ensure that it does not whip causing damage or injury.
- To adjust the suction, slide the speed control button on the suction hand to control the suction power of the vacuum cleaner.
1. Dust barrel release button
2. On/off button
3. Rewind button
CLEANING AND MAINTENANCE
Clean the dust barrel :
1. Press the knob on the dust cup arm.
2. Lift dust barrel.
3. Press the knob on the low end of the dust barrel to open the dust barrel
cover.
Note : when carrying the dust barrel of the vacuum cleaner always carry it by the specially designed handle.
Removing & cleaning filters
Warning: Always unplug the unit from the electrical outlet before getting out the dust barrel.
a. Pre-motor filter
1. Press the knob on the dust cup arm
2. Lift dust barrel.
3. Take out the pre-motor filter for cleaning and changing.
b. Dual filter
1. Press the knob on the dust cup arm
2. Disassemble the dust container as the following pictures show
3. Clean the dual filter
4. Assemble the dust container following the above steps
c. Air outlet filter
1. Press the air outlet grid knob to open
2. Take out the air outlet filter for cleaning and change.
Please note : The sponge filter material in the cleaner will become dusty over time. This is normal and will not affect the performance of the filter. If the sponge filter is so dusty that suction does not return to 100%, then we suggest that the filter be removed then rinsed under the faucet, and allowed to dry for 24 hours by airing not near the fire or some high-temperature objects before refitting into the vacuum. This should be done once every six months or when suction appears to be reduced obviously.
Important : Please note that there is a safety switch inside the vacuum to prevent the unit from being run with a high vacuum rate. If the vacuum is too high, the safety switch will be turned on. In this case, it can diminish the vacuum rate and protect the motor from being broken.
Note : The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will overheat and could become damaged.
Important : All filters should be checked regularly for signs of damage, preferably after each cleaning task. The filters must be replaced immediately if they become damaged. Always disconnect the vacuum from the electrical outlet when checking the filters.
DISPOSAL
Do not dispose of the device in normal domestic waste.
Dispose of the device over a registered waste disposal firm or through your communal waste disposal facility.
Observe the currently valid regulations. In case of doubt, consult your waste disposal facility.
WARRANTY
Dear Valued Customer,
Thank you very much for purchasing a MOA product.
We wish you to inform you that this product is covered by a warranty which complies with all legal provisions concerning existing warranty and consumer rights in the country where the product was purchased.
Should you find any defect or malfunction of your MOA product, please contact the appropriate Customer Care Center.
Sincerely yours,
The MOA Team