moa MF4 Milk Frother Instruction Manual

moa MF4 Milk Frother Instruction Manual

BEFORE USE

Before use, please read this manual carefully.

Only connect the appliance to an earthed wall socket.

This appliance is for household use only. When using electrical appliances, basic safety precautions should always be followed to avoid fires, electric shocks, burns, or other injuries and damage. Read these operating and safety instructions carefully.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Read all instructions before using.

2. In case of emergency, immediately unplug the machine from the power outlet.

3. Check that the voltage indicated on the rating label of the appliance does in fact match that of your electrical system.

4. This appliance is not intended to for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience, and knowledge, unless they are supervised or instructed concerning the use of the appliance by a person responsible for their safety. Never leave the appliance unattended during operation. Keep it out of the reach of children.

5. Do not operate the appliance with a damaged cord or plug or after the appliance malfunctions, has been dropped or damaged in any manner. Return the appliance to an authorized service facility for examination, electrical or mechanical adjustment, or repair.

6. Always unplug the appliance when not in use or before cleaning.
   Allow it to cool before adding or removing parts, and before cleaning the appliance.

7. To protect against fire, electric shock and personal injury, do not immerse cord, plug or appliance in water or other liquid. Never clean the appliance or the power cord if they are humid. Avoid touching the appliance with wet hands.

8. Do not run the cord under carpeting. Do not cover the power cord with throw rugs, runners or similar floor coverings. Arrange the cord away from high traffic areas to a place where it will not be tripped over.

9. Avoid the use of an extension cord as it may overheat and become a fire hazard. If you must use an extension cord, it should be rated no less than 1,000 watts. Only use a grounded socket to connect the appliance.

10. Do not place on or near a hot gas or electric burner, or in a heated oven.

11. It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet receptacle and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn outlets.

12. Use the appliance only as the described in this manual. Any other use or accessory attachments not recommend by the manufacture may cause fire, electric shock, or injury.

13. Never wash in the dishwasher or immerse the machine into water.

14. Only use the milk frother with the power base provided. Do not use the power base with anything else.

15. Do not operate without milk in the jug. Do not insert any object or fingers into the jug when operating. Do not overfill the jug. Filling past the maximum levels indicated inside the jug can cause overflowing during operation. Never touch rotating parts. Risk of injury!

16. This appliance is intended to be used in household(in door) and similar applications such as: staff kitchen areas in shops, offices and other working environments like farm houses; by clients in hotels, motels. No liability is accepted for any damage resulting from use for other purposes, faulty operation or amateur repairs.

PARTS DESCRIPTION

1. Transparent lid
2. Non-stick coated metal tank
3. Jug body
4. Operation button
5. Power base with cord
6. Level scale marks

Whisk without spring = Milk heating
Whisk with spring = Milk frothing

OPERATING INSTRUCTIONS

Before The First Use

• Unpack the box with care, remove all the packing materials away from the appliance and keep it for later use;
• Keep the packing material(bag and etc.) away from children for safety;
• Before using the appliance for the first time, please clean the jug and the accessories as described under the chapter “Cleaning and maintenance” to remove the dust or production residues;

Operating Steps

Whisk with spring
Function : Frothing cold milk/Frothing & heating
Opertaion: Long press for 3 seconds/ Press once and release
Minimum Volume: 45ml
Maximum Volume: 80ml

Whisk without spring
Function :Heating (with some small foam)
Opertaion: Press once and release
Minimum Volume: 45ml
Maximum Volume: 210ml

• Choose the proper whisk and set it inside the jug;
• Pour desired milk into the jug but no more than the maximum volume (Refer to the above table or according to the level marks) to avoid overflow;
• Push the relevant button to start the appliance and it stops automatically when ready; then enjoy at once with the fresh frothed/ heated milk!

Indicator Instruction

• Standby mode: After plugged into the power, milk frothing button blinks once and then off.
• Frothing hot milk: Press once the button with respected whisk(with spring) and the indicator will be steady red till it is ready and stops automatically. Pour the frothed milk into your cup as quick as possible for a quick and perfect hot drink.
• Heating milk: Install the respected whisk(the one without spring), and do the same as above to get hot milk without frothing.
• Frothing cold milk: Long press the milk frothing button for 3 seconds and release when the light turns into steady blue and machine starts to work. Around 80 seconds later, the indicator turns off, which means the milk is well frothed(Do not use Pasteurized milk as not all having foam).
• Press the button again to stop the function during frothing or heating whenever necessary.
• If you want to change the hot milk frothing ratio, you can take off the machine body from the base and pour in the right volume milk, long press the button, then put it back to the base, the machine will start to froth immediately and you can release the button when the desired frothing ratio reaches.

Hints and tips:

Here are some handy hints to help you get the best from your frother.

• Always use your frother first to froth or heating your milk. While it is operating, prepare your coffee or hot chocolate and serve immediately.
• Use whole milk (fat content ≥3.0%) for best result.
• Milk heats to approximately 65±5, which is the ideal temperature to ensure the flavor of your coffee is not impaired and so you don’t have to wait too long until you can start enjoying your drink.
• Keep your whisks in a safe place to prevent from missing.
• How to achieve the perfect frothed milk:
• Non-fat or skimmed milk provides the largest foam bubbles and is the easiest for the beginners. Since there is no fat in the milk, the result is light and airy but flavor is not as rich as other types of milk.
• 2% milk will also foam effortlessly as well as add a more creamy taste than non-fact milk.
• Whole milk is more challenging to achieve the most decadent, rich tasting Cappuccino.

TIPS FOR EASY DRINKS

**Cappuccino

**

1/3 Espresso
2/3 frothed milk
Some coco powder

**Caffe Latte

**

1/3 Espresso shot
2/3 heated milk and stir

**Latte Macchiato

**

Pour desired frothed milk into a tall glass.
Add espresso carefully along the rim of the glass.

**Hot chocolate

**

Pore heated milk into a big cup.
Add chocolate powder and stir.

**Instant coffee drinks

**

Make instant coffee
Add frothed milk inside and stir.

**Instant milky coffee

**

Place instant coffee granules in a cup.
Add hot milk into the cup and stir.

CLEANING AND MAINTENANCE

Unplug from the power before cleaning, remove the lid from the jug.

Never immerse the jug or base into water!

1. The jug & base: Clean the jug immediately after each use, flush and clean the wall with warm soapy water and non-abrasive cloth. Then dry with a soft cloth. Clean with a soft wet cloth. Never use sharp cleaning agents, hard nylon brush or metal brush to avoid any scratches on the stainless steel surface. Never clean with metal object and never use abrasives.
2. The lid: Rinse under water directly.
3. The whisks: Remove from the jug and wash with warm water. Dry and store in a safe place in case of missing.

TROUBLE SHOOTING

Problem: Indicator light doesn’t work or jug doesn’t work

• Causes:

1. Plug is not inserted properly
2. Jug and power base not connected properly
3. No power in the socket
4. Problems with electric elements

• Solutions:

1. Re-insert into the power
2. Remove the jug and place again on the base
3. Check the electric circuit
4. Repair

Problem: Jug ceases to work after starting operation

• Causes:

1. Jug temperature is too high
2. Jug damaged with immersion in water

• Solutions:

1. Rinse cold water inside the jug to reduce the temperature
2. Repair

Problem: Motor doesn’t work

• Causes:

1. Jug is not cleaned in time after use, milk locks the mechanism
2. Motor damage

• Solutions:

1. Clean and move the shaft sleeve of motor by hand to loosen it
2. Repair

Problem: No heating

• Causes:

1. Machine damage

• Solutions:

1. Repair

Problem: Charring

• Causes:
  1. Jug reused without cleaning
  2. Actual voltage much lower than specified voltage
• Solutions:
  1. Cleaning in time after use
  2. Use the appropriate voltage

Problem: Quality of milk froth not up to standard

• Causes:

1. Wrong milk type or temperature
2. Wrong whisk used
3. Jug reused without cleaning

• Solutions:

1. Make sure to use whole or semi-skimmed milk at refrigerator  temperature (about 6-8 °C)
2. Make sure to use the appropriate whisk
3. Make sure the jug is clean

DISPOSAL

Do not dispose of the device in normal domestic waste.
Dispose of the device over a registered waste disposal firm or through your communal waste disposal facility.
Observe the currently valid regulations. In case of doubt, consult your waste disposal facility.

WARRANTY

Dear Valued Customer,
Thank you very much for purchasing a MOA product.
We wish you to inform you that this product is covered by a warranty which complies with all legal provisions concerning existing warranty and consumer rights in the country where the product was purchased.
Should you find any defect or malfunction of your MOA product, please contact the appropriate Customer Care Center.
Sincerely yours,
The MOA Team

References

• MOA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>