MOA Air cooler AC288 Instruction Manual
- June 5, 2024
- moa
Table of Contents
MOA Air cooler AC288
BEFORE USE
Before use, please read this manual carefully.
Only connect the appliance to an earthed wall socket.
This appliance is for household use only. When using electrical appliances,
basic safety precautions should always be followed to avoid fires, electric
shocks, burns, or other injuries and damage. Read these operating and safety
instructions carefully.
IMPORTANT SAFEGUARDS (1/3)
-
Do not let the wind inlet be too close to the wall, curtain, and so on, or it will block the airflow and affect the wind effect.
-
Using it the first time, please check if your voltage is in accord with the nameplate for the air cooler.
-
Before use, please check if the power cord and plug are breakages, Do not the power plug twisted and turned in order to avoid poor contact
-
If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to a hazard.
-
Do not cover the outlet, and keep the air fan away from the socket. You must choose the socket which is up to more than 10A current, and do not use the same socket with another machine.
-
When the air cooler is working, absolutely forbid hand or foreign body from inserting the network (especially pay attention to children)
-
The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capability, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
IMPORTANT SAFEGUARDS (2/3) -
Children should be supervised to ensure that they do not play with the appliance.
-
Please turn off the power before pulling out the plug. Do not pull the power cord and do pull the power plug in order to avoid a short-circuit, fire, electric shock.
-
Do not pull the power plug by wet hand in order to avoid the risk of electric shock.
-
Please pull the plug away from the socket when you do not use it.
-
Please do not put the working air cooler in the declining position or not smooth position.
-
Please do not work air cooler when it is outdoors,or around bath(or shower, or pool).
-
At anytime,the display of the water level of water tank must be less than “Max.”While the display of water level of water tank must be more than “Min.” when air cooler is with a cooling(humidifying) function.
-
After water tank is injected fair water,please not lean (or bump) air cooler when remove air cooler.
-
Please do not put anything on air cooler .
-
Mustn’t cover the outlet and inlet of air cooler.
-
Make sure this appliance and the power cord is not damage before operating. In case of damage, please consult to your authorized technical service.
-
Do not take out water tank before unplugging the power cord plug.
-
Do not insert or allow objects to enter any ventilation or exhaust opening as this may damage the product and could cause an electrical shock or fire.
IMPORTANT SAFEGUARDS (3/3) -
Do not operate your unit with a cover on it as this may result overheating and motor damage.
-
The plug must be removed from the electrical outlet when not operating and before moving, installing, uninstalling and cleaning.
-
Do not add any chemical, metal ingredients into the water tank. These materials are dangerous and any cause problems.
-
Baby, old people and valetudinarianism should not be exposed directly to the fan wind for a long time.
-
This appliance should be used under the rated voltage and frequency as indicated in rating label.
-
If you hands are wet, do not pull out the plug from the electrical outlet.
-
This appliance is not intended for use by persons(including children)with reduce physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-
Children should be supervised to ensure that they do not play with the appliance.
-
Do not use your fan in or around water which may cause electric shock and risk of fire.
-
Do not pull the plug while the power is on. Always ensure that the plug is fully inserted into the electrical outlet before operating.
-
Do not leave your unit under direct sunlight for a long time
CONTROL PANEL
ON/OFF” button
- Press the button the first time, the indicator “LOW” of the control panel is working air cooler is working at low speed. Press the button the second time, and the air cooler stopped working.
SPEED” button
- Press the button the first time when the air cooler is working, and the indicator indicator “MIDDLE” of the control panel is working.
- Press the button the second time when the air cooler is working, and the indicator indicator “HIGH” of the control panel is working.
- Press the button the Third time when the air cooler is working, and the indicator indicator “LOW” of the control panel is working.
WIND” button
- Press the button the first time when the air cooler is working, and the indicator “NORMAL” of the control panel is working.
- Press the button the second time when the air cooler is working, and the indicator “NATURE” of the control panel is working.
- Press the button the second time when the air cooler is working, and the indicator “SLEEP” on the control panel is working.
TIMER” button
- Press the button the first time when the air cooler is working, the air cooler shall stop working after 0.5 hours.
- Press the button the second time when the air cooler is working, the air cooler shall stop working after 1 hour.
- Press the button the third time when the air cooler is working, the air cooler shall stop working after 1.5hours until to 7.5hours.
COOLER” button
- Press the button the first time when air cooler is working, the indicator “COOL” of the control panel is working
SWING” button
-
– Press the button the first time when the air cooler is working, the indicator “SWING” is working while air leaves are working.
ION” button -
– Press the button the first time when the air cooler is working, the indicator “ION” is working while the air cooler is with the “ION” function.
INJECT WATER INTO THE TANK
Pull out the water tank from the bottom of the back (air cooler ), and leak 1/3 of the water tank while injecting fair water into it.
- Please note the display of water level when injecting water.
- The water level of the water tank must be less than “max.” when injecting water.
- The water level of the water tank must be more than“min.” when the air cooler is cooling and humidity.
- The frozen iceboxes (or ices) are put into the water tank when the client wants to get the cooler wind.
Warning:
The water level of the water tank is less than “MAX” after iceboxes( or ices)
are put water tank.
ASSEMBLY
- Open the package and take out the air cooler, and wheels, and place the fan on flat ground.
- Installation of Wheels: Take out the screw package, and fix the wheels with a screw by a cross screwdriver. Two wheels with brakes should be installed at the back holes and the other two wheels at the front holes.
- Filling Water: Turn the water tank lock to a horizontal position, take out the water tank, put in the iceboxes, and add clean tap water to a large section of the tank. Be sure that the water level in the tank does not exceed the level “MAX” which is located at the back of the tank.
Your cooler takes water from a narrow section of the tank and pumps it onto
the cooling pad. The water flowing through the cooling pad spills down to the
large section of the tank. This cycle causes water to absorb dust and dirt in
the air. The filter in the middle of the tank filters and cleans the water,
therefore it should be attached to its place while the device is operating.
Push the water tank to its housing and turn the tank lock to the vertical
position.
OPERATING THE WATER TANK
Check the level of water in the tank frequently. Be sure that the water level
is not below the ‘MIN’ marking which is located on the water tank. Activating
the ‘Cooler’ function with an insufficient amount of water may cause
malfunction of the water pump and the warranty of your product will be void.
Before refilling the water, turn your unit to the ‘Off’ position by pressing
the switch located on the back panel and unplugging the power cord.
HOW TO USE ICE BOXES
Icebox can store cool and slowly absorb the heating from water while ice boxes can make the temperature of water in the water tank less than it of the surrounding. So an Air cooler with frozen ice boxes can blow the cooler wind.
- Put ice boxes in the fridge. After iceboxes are frozen successfully, take ice boxes out of the fridge.
- Pull the water tank out, and put the frozen ice boxes into the water tank.
- One-piece air cooler is with two pieces of ice boxes in order that the client can make them continuously.
CLEANING AND MAINTENANCE
After operation for a long time, the dust cumulated in the dust filter
or cooling pad may influence the inflow of air. Therefore it is recommended to
clean your fan regularly. Please follow the steps below to clean your device.
Turn off the unit and unplug the power cord before cleaning and maintenance.
-
Dust Filter
To remove the dust filter, first, remove the screw, then simply press the locks with both hands and pull it out. Use neutral cleaning agent and brush to clean the dust and dirts on the filter. To attach the clean filter, place the bottom of the filter first and then push the upper part until it is locked tightly. -
Cooling Pad
After removing the dust filter you can see the cooling pad. Press the lock in the middle and gently pull out the pad. Use a clean or soft brush to remove dust and dirt from the pad. Rinse with water if needed and leave it to dry in the open air. Never use any chemical cleaning solution that can harm the pad. -
Water Tank
Turn the water tank lock to a horizontal position and pull the tank. Use soft cleaning agents for cleaning. Wash with water and rinse the place it to its housing by pushing gently. Turn the lock to a vertical position. -
Exterior Cleaning
Clean the exterior case of the fan with a soft damp cloth except for the control panel. Never use a hard cleaning agent that can harm the case. Make sure the unit is dry before operating it.
Caution: Never let water contact the control panel. Always clean it with a soft dry cloth.
DISPOSAL
Do not dispose of the device in normal domestic waste. Dispose of the device
over a registered waste disposal firm or through your communal waste disposal
facility. Observe the currently valid regulations. In case of doubt, consult
your waste disposal facility.
WARRANTY
Dear Valued Customer,
Thank you very much for purchasing an MOA product.We wish to inform you that
this product is covered by a warranty that complies with all legal provisions
concerning the existing warranty and consumer rights in the country where the
product was purchased. Should you find any defect or malfunction of your MOA
product, please contact the appropriate Customer Care Center.Sincerely yours,
The MOA Team