strex SP148 LED Strip Lights Instruction Manual

June 5, 2024
STREX

strex SP148 LED Strip Lights

strex SP148 LED Strip Lights

PACKAGE CONTENTS

strex SP148 LED Strip Lights 1

INSTALLATION

STEP 1: Connect the 4-pin connectors of the strip and IR receiver arrow to arrow

strex SP148 LED Strip Lights 2

STEP 2: Connect the IR receiver to the DC wire

strex SP148 LED Strip Lights 3

STEP 3: Tear off the plastic on the adhesive tape and stick the strip to any smooth, clean and dry surface

strex SP148 LED Strip Lights 4

NOTE: Please make sure the surface is smooth, dry and clean. DO NOT stick the led strip on surfaces, such as wool, fabrics, dust, rough plastic and frosted glass

STEP 4: Stick the LED strip and press it down with force, repeat this step untill the whole LED strip has been placed correctly

strex SP148 LED Strip Lights 6

STEP 5: Installation has been finished. Use the IR remote to turn on and control your LED lighting.

strex SP148 LED Strip Lights 7

Please pull out the transparent film from the bottom of the IR remote to ensure the battery is powered properly.

strex SP148 LED Strip Lights 8

Make sure the IR remote aims at the IR receiver within the sensing distance. The angle of the IR receiver is 120 degrees and the sensing distance is 8 meters. Please use the control within this range for the best functionality .

strex SP148 LED Strip Lights 9

warning

  • Do not connect to the power supply before proper installation.strex SP148 LED Strip Lights 10
  • Please make sure to spread of the light strip before connecting to the power supply.strex SP148 LED Strip Lights 11

IR REMOTE CONTROLLER INDICATION

How to use the DIY function on the remote controller?
When the DIY button is pressed for the first time, the control will enter DIY color mode. You can create a own color for every single DIY key. Pressing the DIY key again will make you leave the DIY color mode. The strip automatically saves the color that you created. The next time this key is pressed, it will show the color you saved the last time. There are 6 DIY keys so you can save up to 6 colors. All modes are independent and have no effect on each other. For example: If you press DIY key 1 first and DIY key 2 afterward, DIY key 1 will be invalid, until key 2 is pressed once again.
44 KEY Remote

strex SP148 LED Strip Lights 12

  1. LED brightnesss adjustment UP
  2. LED brightness adjustment down
  3. Pause/continue
  4. ON/OFF
  5. LED color buttons (20 colors) Red/green/blue/white/orange/light green/ dark blue/milk white/dark yellow/cyan /lyons blue/white pink/yellow/light blue /purple/green white/light yellow/sky blue / brown/blue white
  6.  Quick button: speed up color changing under jump3, jump7, fade7 and flash modes
  7.  Slow button: speed up color changing under jump3, jump7, fade7 and flash modes
  8. Auto button: speed up color changing under jump3, jump7, fade7 and flash modes
  9. Flash button: Flash on and off
  10.  Fade 7 button: Gradually fade 7 colors
  11.  Fade 3 button: Gradually fade 3 colors
  12. Jump 7 button: Gradually jump 7 colors
  13. Jump 3 button: Gradually jump 3 colors
  14. DIY buttons: 6 DIY color memory buttons
  15. Adjust buttons: Increase/decrease RGB

24 KEY Remote

  1. LED brightnesss adjustment UP
  2. LED brightness adjustment down
  3. OFF button
  4. ON button
  5. LED color buttons (16 colors) Red/green/blue/white/orange/pea green / dark blue/dark yellow/cyan/brown/yellow/light blue/pink/straw yellow/sky blue /purple
  6. Flash on/off
  7. Strobe button: Fast changing lighting
  8. Fade button: Fade to next color every 3 seconds
  9. Smooth button: Fade to next color every 0.5 second

Specifications

Working environment| Temperature

range

| -25 C ~ 60 C
---|---|---
Working

Humidity

| 0% ~ 80% RH
Input voltage| DC 12V
Life Span| SMD 3258 RGB| 25000 hrs
SMD 5050 RGB| 50000 hrs

Safety tips

  1. Please ensure the power is off before wiring and installation
  2. Supply voltage of this product is DC 12V never connect to DC 24V or AC 220V
  3. Never connect to wires directly in case of short circuit
  4. Please connect several strips in parallel and choose a multi-ports adapter if you want to usethe strips together
  5. To ensure normal work of the ship, please use the voltage indicated on the box
  6. If the power supply is damaged, do not attempt to repair it yourself. Please leave it to a professional technician.
  7. Please do not light the strip on for over 5 seconds when its still rolled up.
  8. Please do not use this product in open air or humid environments
  9. To avoid any damage to the strip, please do not use chemical solvent during cleaning

Troubleshooting

  • Strip does not light on after installation: Check the connector and if the led strip has acces to power. Check if the plastic film has been removed on the remote. Replace the battery remote.
  • Strip does not light on after progamming DIY keys: Check if the shear connection is correct
  • 2 Strips with different colors: Check if the 2 strips are connected in parallel

Manual information
All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher, except in the case of brief quotations embodied in critical reviews and certain other noncommercial uses permitted by copyright law. For permission requests at the address below.

STREX
SBD Trading B.V. (Strex Europe) Noorwegenstraat 6-A4 7418BC Deventer
The Netherlands info@strex.nlwww.strex.nl

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals