KASTA RM1440BH-W Smart Switch Relay Mechanism Instruction Manual
- June 5, 2024
- KASTA
Table of Contents
KASTA RM1440BH-W Smart Switch Relay Mechanism
Installation Instructions
Smart Switch Relay Mechanism
Product Code: RM1440BH-W
APP Installation
Visit www.kasta.com.au or your app store to
download the free KASTA app. iOS: requires iOS 9.0 or later. Android: requires
Android 4.4 or later. Devices must support Bluetooth 4.0
Important Safety Informatioin
- This product must be installed by a licensed electrician in accordance with all the require ments of AS/NZS 3000 (current edition) and other relevant Standards and Regulations.
- Electricity MUST be disconnected prior to installation. Failure to do so may result in serious injury and or loss of life.
- Indoor use only. Not suitable for damp or explosive environments.
- Complies to Australian Standards AS/NZS 60950.1:2015, AS/NZS CISPR 15.
- No user serviceable parts inside.
FEATURES
- Relay for switching a load on and off.
- Smart functions via phone/tablet with the app such as schedules, timers, scenes and groups.
- Push Button Control.
- Fits most Australian Standard wall mech apertures.
- Simple 3 wire connection-Active in, load out and neutral.
- Integral blue backlight that can be enabled/disabled after installation.
- Multi-way load switching possible using KASTA remote switches.
FUNCTION SETUP
-
ON/OFF SWITCH 1 CLICK
Turns load or off. -
DELAY TO OFF 3 CLICKS*
Load automatically turns off after set time. -
PAIRING MODE 6 CLICKS
Enter pairing mode for multi-way switching. Lights will pulse. -
BACKLIGHT ON/OFF 7 CLICKS
Disables or enables backlight on button. -
FACTORY RESET 9 CLICKS
Restores all settings back to factory.
If successful, light will pulse the number of times that the switch was clicked, indicating function.
TECHNICAL SPECIFICATIONS
- Operating Temp: -20ºc to 40ºc
- Supply: 220-240V AC 50Hz
- Load: 480W
- Thermal Derating: 25ºc to 40º (480W-100 W)
CONNECTION DIAGRAM
