KASTA-1BMBH-W Smart Mains Powered 1-Button Mechanism Instruction Manual
- June 5, 2024
- KASTA
Table of Contents
KASTA-1BMBH-W Smart Mains Powered 1-Button Mechanism
FEATURES
- Mains-powered one-button remote switch mechanism.
- Simple 2 wire connection – A, N.
- Can be paired with KASTA dimmer and switch relay mechanisms for multi-way control (8x maximum).
- Short press for on/off control, long press for dimming control (default settings).
- Smart functions via phone/tablet with the app such as schedules, timers, scenes and groups.
- Fits most Australian Standard wall mech apertures.
- Integral blue backlight.
- To prevent a reduction in Bluetooth ® signal strength, install away from metal objects.
FUNCTION SETUP
ON/OFF SWITCH 1 CLICK
Turns lights on or off. When turned ON, lights will adjust to the previous
brightness setting.
DIM UP/DOWN ONE LONG PRESS
When lights are on, long-press the button to dim up or down. Release the
button to stop.
Only applicable when paired with Push Button Smart Dimmer or Hidden Smart
Dimmer.
FULL BRIGHTNESS 2 CLICKS
Sets lights to full brightness. Only applicable when paired with Push Button
Smart Dimmer or Hidden Smart Dimmer.
DELAY TO OFF 3 CLICKS
Lights automatically turns off after set time.
SET MIN DIM LEVEL 4 CLICKS
Dim to the desired level. Click the button 4 times to store the setting. Only
applicable when
paired with Push Button Smart Dimmer or Hidden Smart Dimmer.
RESET MIN DIM LEVEL 5 CLICKS
Restores back to factory minimum dimming level.
PAIRING MODE 6 CLICKS
Enter pairing mode for multi-way dimming. The remote switch backlight will
pulse.
FACTORY RESET 9 CLICKS
Restores all settings back to the factory.
If successful, the light and LED indicator light will pulse the number of
times that the switch was clicked, indicating function.
APP ENABLED FUNCTION
RE-TRIGGER TIMER 1 CLICK
Enable delay to on/off. The function must be programmed through app first.
TECHNICAL SPECIFICATIONS
- Operating Temp: -20ºc to 40ºc
- Supply: 220-240V AC 50Hz
- Range: Up to 30m open air