Panasonic ES-RC20 Card Shaver Instruction Manual

: June 4, 2024
: Panasonic

Table of Contents

Safety instructions
Parts identification
Replacing batteries
Using
Cleaning with the brush
Documents / Resources

ES-RC20 Card Shaver
Instruction Manual

Before operating this unit, please read these instructions completely.

Safety instructions

Caution ‑ The outer foil is very thin and can be damaged if not used correctly. Check that the foil is not damaged before using the shaver.
Do not use the shaver if the foil etc. is damaged as you will cut your skin.
Be sure to turn the shaver off before maintenance.
‑ Failure to do so may result in an accident or injury.
Do not alter the appliance. Also, do not disassemble or repair it.
‑ It could result in injury. Contact the shop where you purchased the appliance or your nearest service center for repairs.
Before use, always make sure that the foil has not become damaged or misshapen.
‑ Failure to do so may cause damage to skin.
Do not apply excessive pressure to the foil.
‑ It could break the foil, resulting in scratching of the skin.
Do not use the appliance for any purpose other than shaving.
‑ It could break or deform the foil, resulting in scratching of the skin.
Do not short‑circuit, disassemble, or discard the battery in a fire.
‑ It could result in burns or injury.
WARNING – Keep the appliance dry.

SPECIFICATIONS
Model: ES‑RC20
Batteries: Two AAA LR03 alkaline dry‑cell batteries (Sold separately)
This product is intended for household use only.

Parts identification

Protective cap
Outer foil
Outer foil release buttons
Inner blade
0/1 switch
Battery cover release button
Battery cover
Cleaning brush
Soft case

Panasonic ES RC20 Card Shaver - Protective cap

Replacing batteries

Slide the 0/1 switch to “0”.
Remove the battery cover while pressing the battery cover release button.
Insert two AAA (LR03) alkaline batteries.
• Do not use a new battery with an old one.
• If the shaver will not be used for a long time, please remove the batteries.
• Make sure that the old batteries are disposed of at an officially assigned location.

Using

Remove the protective cap.
Check that the outer foil is not deformed or damaged.
Slide the 0/1 switch to “1”.
Stretch your skin with your free hand and move the shaver back and forth in the direction of your beard.
Attach the protective cap to prevent damage of the outer foil after use.

Cleaning with the brush

Remove the outer foil while pressing the outer foil release buttons.
Remove the inner blade.
Clean with the brush as illustrated.

Replacing the outer foil and the inner blade

outer foil	once every year
inner blade	once every two years

Remove the outer foil while pressing the outer foil release buttons.
Remove the inner blade.
Insert the inner blade until it clicks as illustrated.
Insert the outer foil by pushing it downwards until it clicks.

Panasonic Electric Works Wanbao (Guangzhou) Co., Ltd.http://panasonic.net
F. No.1 EN, HK, KO, THAI, ARA, PER
Made in China
Printed in China