AUKEY Bluetooth Earbuds with Wireless Charging Case-Complete Features/Instruction Guide

AUKEY Bluetooth Earbuds with Wireless Charging Case

Specifications

• FEATURES: Wireless, Super low latency
• BRAND: AUKEY
• COLOR: Black
• PLAYTIME: 5 hours
• WATER RESISTANCE RATING: IPX5
• WEIGHT: 8g / 0.27oz
• COMPATIBILITY: iOS, Android, and Windows

Introduction

It has a playtime of 5 hours, with a further 25 hours with the charging case. Low latency stereo is ideal for sports, workouts, and runs. Infrared proximity sensors detect whether or not the earphones are being worn. To pause, take out the earphones and replace them in your ears. Charge the Bluetooth earbuds by placing them in the charging case. It has IPX5 Water Resistance. Protects against perspiration and rain with water-resistant construction. These ultra- light earbuds are under 8g / 0.27oz in size and weight.

It Uses One Earbud. To keep aware of your surroundings, use either earbud as a Bluetooth headset. It is a Comfortable Fit.  Compact, lightweight design with three distinct ear-tip sizes for all-day comfort. It has a Comfortable Charging Case. The case charges the earphones five times. The battery level indicator displays the remaining battery capacity. It has Smart Touch Control. Without taking your phone out, tap to control your music, handle calls, and more. Almost every Bluetooth device, including iOS, Android, and Windows, can use advanced Bluetooth 5 technology.

How to use

• “TAP EITHER EARBUD TO PLAY/PAUSE”
• “NEXT TRACK: Double-tap right earbud ” PREVIOUS TRACK: Double-tap left earbud
• VOICE ASSISTANT: Tap the left earbud three times.
• “TO TURN ON/OFF LOW-LATENCY MODE, triple-tap right earbud “TO ANSWER/END A CALL, double-tap either earbud”
• REJECT A CALL: For 2 seconds, press and hold either earpiece.
• How to use
• Hold down the multi-function button until the LED indicator alternately flashes blue and red.
• Turn on Bluetooth on the device you want to pair the earbuds with.
• Find and choose “AUKEY EP-B56” from the list of available devices.
• If pairing requires a code or PIN, type “0000.”

HOW TO PAIR

• Check that the battery is completely charged.
• When pairing your device and headphones, keep them within 3 feet of each other.
• Now hold the multifunction button down for roughly 6 seconds, or until the LED flashes red and blue.
• Bluetooth pairing should be enabled on your phone.

HOW TO RESET

• When you remove both earphones from the charging case, they will turn on.
• For 15 seconds, press and hold the touch-sensitive surfaces on both earphones.
• To reset, place both earphones in the charging case and close the top.
• When you open the lid again, both earbuds will turn on and pair.

HOW TO TURN ON

Turn them on simultaneously by holding down the buttons until they flash red and then blue. When both earbuds are flashing at the same time, you can double press one of them. The earbud will tell you if it’s connected.

Frequently Asked Questions

• What is the best way to tell if your Aukey earbuds are fully charged?
  When not in use, the earbuds should be stored in the case. The LED indicators on the earphones will turn solid red when they are charging in the case (but not the case itself). The earphones are fully charged when the LEDs turn green for 1 minute and then turn off.

• On Aukey earphones, where is the multi-function button?
  When the earbuds are in the charging case, press and hold the multi- function button on the right earbud for 5 seconds to clear the pairing list.

• Why won’t my Aukey earbuds pair?
  By hitting the power button for 15 seconds, then erasing the headphones from your phone or device’s linked list, restarting your device, and re- pairing the headphones, you can reset your Bluetooth headphones.

• How can I reset my Aukey n5 to factory settings?
  In the worst-case scenario, remove the right earbud and press and hold the touch panel for 10 seconds until it turns red. This removes all previous pairings. To pair the earbud, put it back in the case and take it out again.\

• Why won’t my Aukey earbuds charge?
  The following alternatives are available at the time this happens: Check that the charging case is completely charged. Make sure the earphones don’t have any plastic in the charging region or across the contact point. They do not charge if it is not removed.

• What is the lifespan of Aukey earbuds?
  Battery life is 4.5 hours per charge, with roughly 20 hours more in the charging case. The battery life is excellent. A Micro-USB cable is used to charge the box. You must first fill up the case before charging the true wireless earphones.

• What is the best way to see if my earbuds are charging?
  The light indicates the charge status of your AirPods if they are in your case and the lid is open. The light indicates the status of your case when your AirPods aren’t in it. Green indicates that the battery is completely charged, while amber indicates that less than one full charge remains.

• Why won’t my earbuds charge in their case?
  Check that they’re correctly seated on the charging stand or in the case. Some headphones are charged via a stand or case that has a cord attached to it, rather than directly through the cable. If this is the case, ensure that your headphones are properly positioned so that they can accept a charge.

• How can you fix a non-charging earbud?
  When charging your headphones, be sure your computer is turned on.
  Instead of using a USB hub, use a direct connection.
  Using a Power Socket to Charge the Headphones…
  Check your headphones’ and charger’s contact points.
  Check that the USB cord is properly inserted.

• Are Aukey earphones equipped with a microphone?
  AUKEY True Wireless Earbuds for iPhone and Android, Bluetooth 5 Headphones in Ear Wireless Earphones with Charging Case, Built-in Mic, Touch Control, 25 Hours Playback

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>