moa Cooktop IC9SA Instruction Manual

[ ](https://manuals.plus/wp-content/uploads/2022/05/moa-CooktopIC9SA-

LOGO.jpg)moa Cooktop IC9SA

BEFORE USE

Before use, please read this manual carefully.
Only connect the appliance to an earthed wall socket.
This appliance is for household use only. When using electrical appliances, basic safety precautions should always be followed to
avoid fires, electric shocks, burns, or other injuries and damage. Read
these operating and safety instructions carefully.

IMPORTANT SAFEGUARDS (1/2)

1. Do not place the unit near fire or gas or any hot environment in order to avoid damages or malfunction.

2. To reduce the risk and damage, the plug should be fit into an individual outlet and the rated electrical current should be not less than 16A.

3. Place the unit on a level and dry surface. Ensure there is a minimum free area of at least 10cm surrounding the unit on all sides.

4. Do not immerse the appliance or electric cord in water or any other liquid.

5. Do not allow any liquid to enter the unit’s cabinet.This will damage the inner electrical parts.

6. Ensure the power code is removed from the power socket before cleaning.

7. Do not cover the air vent with anything during cooking.

8. Before Heating any tinned food please uncap its cover.

9. Do not place any metallic accessories like spoons, ladles, etc on the cooktop while cooking in order to avoid heating.It is advisable to keep even non-metallic objects at least 10cm away from the unit while it is in use.
   IMPORTANT SAFEGUARDS (2/2)

10. Do not cook with an empty pot.It may cause malfunction or pose danger.

11. If power cord gets damaged,please ensure you replace it only with a manufacturer-recommended cord.

12. If the unit is not working for some reason even after basic trouble-shooting by you,please immediately contact with our service points.Do not attempt to open the unit by yourself as it may be dangerous.

13. Always clean the unit to avoid dirt going into the fan.This will affect its normal functioning.

14.  Do not touch the plate while the unit is working,it may cause burns.

15. Users with cardiac pacemakers are advised to consult their doctors before using this product.

16. Do not place the unit on or near a gas stove.

17. Do not place any inflammable item like paper,cloth or other such articles under the unit.It may cause a fire hazard.

18. Do not place the unit on a cloth or carpet etc.This may block the air vent and be of danger to the unit and the user.

19. Avoid hitting the plate of the unit as it may crack or break the unit. In case you spot any cracks on the cooktop surface,turn off the unit and
    remove the cord from the electric outlet immediately and contact the service centers.

20. Do not touch the control panel with any sharp objects.

PRODUCT CONFIGURATION [](https://manuals.plus/wp-content/uploads/2022/05

/moa-CooktopIC9SA-1.jpg)

1. Black Crystal Plate
2. Heating Area
3. On/Off Button
4. Lock Key
5. Timer Key
6.  LED Display
7. Decreased Display
8. Increased Button
9. Function Key

INDUCTION TECHNOLOGY

When the power connection is ON,the electric current will produce a magnetic field in the induction coil,which is embedded in the machine. As soon as the magnetic force lines in the magnetic field touch the alloy steel pot/boiler,it will produce a heating effect,which then heats the good in the saucepan or pot.

PRODUCT OPERATING INSTRUCTIONS

Basic Operation

• I nsert the plug into AC 220-240V,50-60Hz Socket,The LED display”—-”

• Place induction-compatible cooking utensils in the center of the cooktop plate.

• Press ON/OFF button to power the unit on,The LED Display “ON”
  .After press “Function” Key,the default power 2000W to start,different cooking functions,setting and adjustments.

• To power off the unit,press the ON/OFF button again.

• Remove the plug from the socket if the unit is not going to be used fora long time.

Manual Control Function: Power,Temperature Power Function

1. Press the [Function] key,The display will show [1300] indicating that the default power is 1300W.It can be adjusted by pressing the [+] or [-] key to set the desired power level.
2. There are 8 power levels in total (200-500-800-1000-1300-1600-1800-2000W)
3. To Cancel this mode,press [Function] key or [On/Off] key.
4. Timer Time:4 Hours

Temperature Function

1. Press the [Function] key,The display will show [180] indicating that the default temperature is 180 °C.It can be adjusted by pressing the [+] or [-] key to set the desired temperature level.
2. There are 8 temperature levels in total (80-100-130-160-180-200-220-240 °C)
3. To cancel this mode, press [Function] key or [On/Off] key.
4. Timer Time:4 Hours

Lock Function

1. Press the [Lock] key and hold seconds, the LED shown [LOC] represents that the appliance is locked.
2. To cancel this mode, press [Lock] key and hold seconds.

Timer Function (4 Hours Timer )

1. User can set the cooking time when the cooking mode is selected.
2. Press the [ Timer ] key,the display will show [0:00], user can press[+] or [-] key to set the desired time.
3. Press the [+] or [-] key once can increase or decrease in multiples of 1minute.
4.  Press and hold the [+] or [-] key to access quick adjustment. The time can be adjusted from 0 minutes to 4 hours.
5. After setting, user can press the Cooking key once to confirm or wait until the display stops.
6. To cancel this mode, press to [Function] Key or [Timer] Key, or [On/Off] key.

SELECTION OF COOKWARE

1. Material required:Please use only induction compatible cookware made of steel, cast iron, enameled iron, stainless steel, flat-bottom pans/ pots with diameter from 12 to 26cm
2. Pans/Pots/Utensils should have a flat surface.Do not try to use any other kind of utensils or vessels(especially pressure sensor vessels)
3. While buying your cookware,look for an “Induction Compatible” sign or wording to ensure it will work with this cooktop

MAINTENANCE AND DAILY CARE

1. Keep the unit clean at all times. Avoid dirt getting into the fan or other inner parts of the Unit.
2. Before starting to clean the Unit, ensure the Unit is powered off and remove the power plug from the socket. Do not clean the Unit until the surface cools down.
3. Remove grease, dirt, stains etc by cleaning the Unit with a clean soft cloth and mild detergent.
4. The fan in the air vent of the Unit is bound to get dirt stuck on it. Please remove it regularly with a soft brush or cotton stick.
5. Do not immerse the Unit or power cord directly into water or any other liquid to clean it. It will damage the Unit.
6. To protect the Unit from any kind of power surge, ensure the plug is fit properly into the socket.
7. Do not pull out the power cord directly during operation.To extend the appliance’s life, press the “On/Off” button first, then unplug the power cord from the socket.
8.  The fan will run to cool the heating plate even after the Unit is powered off.It is better to remove the plug after the fan stops working.
9. When not using the Unit for a long time,remove the plug from the socket.
10. Some models will have structural design to prevent cockroaches from entering inside the Unit.If needed,you can use mothball or equivalent cockroach repellent to protect the Unit.

TROUBLESHOOTING

During operations,If there is any error, please check the following table for common trouble-shooting options before calling for service.Below are common errors and the checks to perform.

ERROR SCENARIO:
Error codes occur E0

CHECKPOINTS:
Without Cookware or Incompatible cookware used.

REMEDY:
please check whether the cookware is induction compatible or not

ERROR SCENARIO:
Error codes occur E1

CHECKPOINTS:
Low-Voltage

REMEDY:
Please ensure Voltage>88V, 220-240V~ is perfect

ERROR SCENARIO:
Error codes occur E2

CHECKPOINTS:
High-Voltage

REMEDY:
Please ensure Voltage <280V, 220-240V~ is perfect

ERROR SCENARIO:
Error codes occur E3

CHECKPOINTS:
Top plate Sensor Overheat or Short Circuit

REMEDY:
Start again after the temperature cool down If not, please return the cooker to the service center for checking and repairing

ERROR SCENARIO:
Error codes occur E4

CHECKPOINTS:
Top Plate Sensor Open Circuit or without connect

REMEDY:
Please contact service center for checking and repairs

ERROR SCENARIO:
Error codes occur E5

CHECKPOINTS:
IGBT Sensor Overheat or Short Circuit or Fan without connect

REMEDY:
please contact service center for checking and repairs

ERROR SCENARIO:
Error codes occur E6

CHECKPOINTS:
IGBT Sensor Open Circuit

REMEDY:
please contact service center for checking and repairs

DISPOSAL

Do not dispose of the device in normal domestic waste.
Dispose of the device over a registered waste disposal firm or through your communal waste disposal facility.
Observe the currently valid regulations. In case of doubt, consult your waste disposal facility.

WARRANTY

Dear Valued Customer,
Thank you very much for purchasing an MOA product.
We wish you to inform you that this product is covered by a warranty that complies with all legal provisions concerning existing warranty and consumer rights in the country where the product was purchased.
Should you find any defect or malfunction of your MOA product, please contact the appropriate Customer Care Center.
Sincerely yours, The MOA Team

References

• MOA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>