Wireless Earbuds, Tribit 100H Playtime Bluetooth-Complete Features/User Manual

Wireless Earbuds, Tribit 100H Playtime Bluetooth

Specifications

• PLAYTIME: 100hrs.
• WATERPROOF: IPX 8
• DRIVER: 6mm
• DISPLAY: LED
• BLUETOOTH: 5.0

Introduction

It has an emergency power supply. It has a built-in rechargeable battery with high capacity. It provides a 20-time additional charge for earbuds and a backup power source for other gadgets. For 1.5 hours of music, you just need 10 minutes of charging. The charging case’s LED light indicates how much power is left, and the earphones’ built-in magnets keep them in place. It has a powerful Bass effect. It’s as if you’re at the concert in person. The 6mm drivers on these powerful Tribit FlyBuds 3 wireless earbuds beats deliver bass as you’ve never heard before. It’ll feel like you’re hearing your favorite songs for the first time, from drum kicks to clear voices.

To turn on or pair these best Bluetooth earphones with your Bluetooth devices, simply open the package. Simply close the case to turn it off when you’re done. The case will already be paired for next time when you’re ready to listen again. The Tribit FlyBuds 3 will stay with you no matter how sweaty your body becomes during sports. Even rain won’t stop these cordless Bluetooth earphones, which are small and light enough to accompany you everywhere you go.

Package Contents

• Earbud (L / R) + Charging Case

• Ear Hooks (2 Pairs)

• USB-C Charging Cable

• Ear Tips (5 sets)

• User Manual

Product Parts

How to Replace the Ear Tips

How to Wear the Earbuds

On/Off

The first time you use the earbuds, please tear off the insulation sticker. Then place them in the charging case and close it.

Bluetooth Connection Guidelines

• Connect the earbuds with a Bluetooth device

Open the top cover of the charging case, and the earbuds will automatically enter Bluetooth pairing mode. Open the Bluetooth function in the Bluetooth device, refresh the Bluetooth device search and click the audio device named “FlyBuds 3” to connect. After successfully connecting, the earbuds indicator will go off

The two ways to connect with other devices are as follows:

1. Please disconnect the earbuds with the currently connected Bluetooth device, and the earbuds will automatically enter Bluetooth pairing
2. Please refer to number 11, earbuds reset operation. After resetting successfully, they will enter Bluetooth pairing mode.

Button Functionality

• Play/ pause the music
  Double-tap

• Answer/ End a call
  Double-tap

• Next track
  Triple-tap

• Reject the incoming call (incoming call status)
  Press and hold the touch button for 2s

• Activate voice assistant
  Press and hold the touch button for 2s and you hear the prompt tone, and then release it

Earbuds Indicator Light Display

• Touch Button: white light is on when touched.
• Bluetooth Pairing: red light flashes slowly.
• Successful Connection: indicator light is off.
• Low Battery: red light quickly flashes twice every 20s.

Charging Case Indicator Display

An indicator light displays when the earbuds are in the charging mode.

The left-most and right-most indicator lights of the charging case will show the charging status of the left and right earbuds respectively. During the charging process, the indicator lights will always be on. When fully charged, they will be off.

Charging Guidelines

• Charging of the earbuds: Put earbuds into the charging case. Then close the cover and charging will begin.

Charging time of earbuds : about 90 minutes

• Charging of the charging case: Insert one end of the USB cable into a power supply that supports SV output, and the other end into the charging port of the charging case. The indicator lights will flash while it is charging, and the 4 indicator lights will always be on when it is fully charged.

Charging time of the charging case: about 210 minutes

How to Reset the Earbuds

**** Place the left and right earbuds back into the charging case. With the cover open, press and hold the charging case button until the 4 indicator lights of the charging case flash four times at the same time, indicating that the earbuds are successfully reset.

Note: If there is a Bluetooth device connected to the ear­ buds after resetting, the pairing will need to be deleted for successful re-pairing.

The Left & Right Earbuds Pairing Guidelines

First, disconnect the earbuds from the Bluetooth device. Put the left and right earbuds into the charging case, then take them out. Double-tap the touch button and the red light will flash slowly. Then long-press the touch button until the red light flashes quickly. After a few seconds, the red light on the left earbud will flash slowly, and the red light on the right earbud will be off, indicating that the left and right earbuds are success­ fully paired and connected.

Note: When the left and right earbuds lose connection.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communication. However, there is no guarantee that interference won’t occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter­ mined by turning the equipment off and on. Users are encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving
• Increase the separation between the equipment and
• Connect the equipment into an outlet on a circuit that is different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

• This device may not cause harmful
• This device must accept any interference received, including interference that may cause undesired operation.

file:///C:/Users/HOME/Downloads/FlyBuds_3_Manual%20(1).pdf

Frequently Asked Questions

• What is the origin of Tribit?
  /PRNewswire/ — SHENZHEN, China, May 28, 2020 — Tribit Audio Limited (Tribit), the pioneering wireless audio firm behind the StormBox, MaxSound Plus, and XSound Go, is launching two new audio products: the StormBox Micro Bluetooth speaker and the FlyBuds 1 earbuds.

• What is the procedure for pairing my Tribit Bluetooth headphones?
  For 5 seconds, press and hold the MFB button until the LED indicator lights blue. To connect, use your phone’s Bluetooth feature to search for Bluetooth devices, then click the Tribit XFree Go in the pairing list.

• What is the procedure for turning on Tribit earbuds?
  To connect for the first time, turn on your Bluetooth device and search for other Bluetooth-enabled devices. Select the device labeled “FlyBuds 3mini” to begin the connection. The earphones will then automatically reconnect to the last device connected.

• My Tribit earphones aren’t connecting. why?
  Replace the charging case with the left and right earphones. Press and hold the charging case button with the cover open until the charging case’s four indicator lights flash four times at the same time, indicating that the earbuds have been correctly reset.

• Are Bluetooth earphones dangerous?
  Nonionizing radiation is emitted at low levels by Bluetooth devices. Humans are not affected by low levels of this sort of radiation. Nonionizing radiation is “usually viewed as innocuous to people,” according to the Food and Drug Administration (FDA).

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>