Jura cool control 2500ml Instructions

: June 5, 2024
: Jura

Table of Contents

Control elements
Important information
Preparing and using for the first time
Cool Control Wireless
Cleaning and maintenance
Transport and environmentally friendly disposal
Technical data
JURA contact details / Legal information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Cool Control Basic 1 L & Cool Control Wireless 1 L
Instructions for Use

i Please note : These instructions apply to both versions of the Cool Control 1l.

Jura cool control 2500ml - Control Symbol description
Warnings

CAUTION WARNING
Always take note of any information marked with the words CAUTION or WARNING and a warning sign. The signal word WARNING draws your attention to potential
serious injury, and the signal word CAUTION to a potential minor injury.

Symbols used

→ Prompt to take action. This symbol means that you are being prompted to perform some action.
i Information and tips to make use of your Cool Control even easier.

Control elements

Cool Control
Cover
Stainless steel container
Operating display
Power supply unit with mains cable
On/Off button
Socket
Connector (may vary depending on the machine and the associated cappuccino frother)
Milk pipe
Connector
Adapter
Metal pipe

Controls on the Cool Control Wireless

Cover with integrated milk level sensor
LED in the cover
Reset button in the cover
Milk level sensor
Receiver (for inserting in the coffee machine)
LED in the receiver
Reset button in the receiver

Important information

Proper use
This machine (chilled drinks dispenser) is intended for use in the home and in similar situations, for example by customers in hotels, motels, and other residential buildings and by workers in shops, offices, and other working environments. It should only be used to cool milk and keep it fresh in the stainless steel container supplied. The accessory parts for the Cool Control Wireless wirelessly monitor the milk level in the stainless steel container supplied. Use for any other purpose will be deemed improper. JURA cannot accept any responsibility for the consequences of improper use.

Before using the machine read these instructions for use thoroughly and completely and comply with the instructions they contain. Warranty service is not applicable for damage or defects caused by non-compliance with the instructions for use. Keep these instructions for use close to the machine and pass them on to the next user.

For your safety
Please carefully read and observe the important safety information set out below. To avoid the danger of potentially fatal electric shock:

Never use a machine that is damaged or has a defective main cable.
Never start the machine with wet hands.
Before starting the machine, ensure that the main cable is dry.
Only use the power supply unit supplied as standard to connect the machine to the alternating current grid.
In the event of signs of damage, for example, if there is a smell of burning, unplug the machine immediately from the main supply and contact JURA service.
If the main cable of this machine is damaged it must be repaired either directly by JURA or by an authorized JURA service center.
Make sure that the Cool Control and the mains cable are not located close to hot surfaces or naked flames.
Be careful to ensure that the main cable is not trapped and does not rub against sharp edges.
Never open and repair the machine yourself.
Do not modify the machine in any way that is not described in the instructions for use. The machine contains live parts. Repairs may only be carried out by authorized JURA service centres, using original spare parts and accessories.

A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire:

Ensure that the ventilation slots are not covered.
Never allow the mains cable to loosely hang down. The main cable could pose a tripping hazard or become damaged.
Protect your Cool Control from environmental influences such as rain, frost, and direct sunlight.
Do not immerse the Cool Control, cable, or connections in water.
Do not put the Cool Control or any individual parts in the dishwasher.
Switch your Cool Control off before cleaning and disconnect the mains plug. Always wipe the Cool Control with a damp cloth rather than a wet one, and protect it from prolonged exposure to water splash.
Do not pour the milk you want to cool directly into the machine. Use the stainless steel container supplied as standard.
Only connect the machine to the mains voltage in accordance with the information on the rating plate. The rating plate is located on the underside of your Cool Control. Further technical data is given in these instructions for use (see Chapter 5 ‘Technical Data’).
Switch the machine off if you are going to be absent for a long period of time.
Only operate the machine when supervised.
People, including children, who
do not have the physical, sensory or mental capabilities to use the machine safely or
are inexperienced or lack knowledge in how to use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it
correctly.

Preparing and using for the first time

Setting up and connecting
When setting up your Cool Control, please note the following:

Set the machine down on a horizontal surface that is not sensitive to water.
Choose a spot for your Cool Control that is protected against overheating. Ensure that the ventilation slots are not covered.
In the interests of hygiene, you should use a damp cloth to clean both the inside and outside of your new machine before starting it. Rinse the stainless steel container out
thoroughly.

WARNING
If the machine is operated with a defective main cable, there is a danger of potentially fatal electric shock.

Never use a machine that is damaged or has a defective main cable.
Plug the cable for the power supply unit into the Cool Control’s socket.
Insert the mains plug into a power socket.
Insert the metal pipe into the adapter.
Insert the adapter into the cover.
Insert one end of the milk pipe into the adapter.

Cooling milk

i Chapter 2 ‘Cool Control Wireless’ explains how to start up and operate the Cool Control Wireless.
→ Fill the stainless steel container with milk.
→ Use the cover to close the stainless steel container.
→ Insert the stainless steel container into the Cool Control. Ensure the cover connection is correctly aligned correctly and engaged.
i Connect the milk pipe with the cappuccino frother on your coffee machine.
→ Please note that the connector may vary depending on the machine and the associated cappuccino frother.
→ Press the On/Off button.
Once the cover is correctly aligned and engaged, the machine starts cooling.
i Your JURA Cool Control always keeps your milk within the optimum temperature range.
The milk cannot freeze.
i To save energy, the cooling process stops as soon as the container is removed from the
Cool Control.
i To switch off the Cool Control, press the On/Off button Q.
i If you want to shut down the machine, remove the main plug from the power socket.

Cool Control Wireless

i This chapter only applies to the Cool
Control Wireless 1 l.

Compatibility
→ The Cool Control Wireless is unfortunately not compatible with all JURA coffee machines. Ask your dealer or visit www.jura.com.

Setting up the cover (with milk level sensor) and receiver
→ Clean the cover with the milk level sensor thoroughly before first use using a damp cloth and a mild liquid detergent.
→ Switch on your coffee machine.
→ Insert the receiver into the service socket of the coffee machine.
i If you don’t know where the service socket of your coffee machine is, ask your dealer or visit www.jura.com.
→ Press the On/Off button.
→ Fill the stainless steel container of the Cool Control (at least a third) with milk.
→ Use the cover to close the stainless steel container.
→ Insert the stainless steel container into the Cool Control. Ensure the cover connection is correctly aligned correctly and engaged.
The LEDs in the cover and receiver flash.
As soon as both LEDs continuously light up blue, the milk level sensor and the receiver are ready for use.
i Once the stainless steel container is inserted and the cover is correctly engaged, the machine starts cooling. The cooling process stops when the container is removed again.
i If there is not enough milk in the stainless steel container, this is indicated on the display of your coffee machine during preparation. The display text may vary depending on the machine.

Uninstalling the cover and receiver

Switch off your coffee machine.
Remove the receiver from the service socket of the coffee machine.
Press the On/Off button to switch the Cool Control off.

LED behaviors/troubleshooting
LEDs in the cover and receiver:

Behavior

|

Description

---|---
LED does not light up.| The cover is not supplied with electricity. The Cool Control is switched off.
LED lights up.| The wireless connection between the cover and receiver is established.
LED flashes (once per second)| Attempting to establish the wireless connection.

Rectifying potential faults:

i ‘Error Milk’ is displayed, and both LEDs light up.
i The milk level sensor is defective. Service required.
i Both LEDs flash.
i The connection between the cover and receiver is faulty or not established. Press both Reset buttons at the same time (e.g. with a pen). As soon as both LEDs continuously
light up blue, the milk level sensor and the receiver are ready for use. Problem persisting? Service required.
i If service is required, uninstall the cover and receiver as described in this chapter (under ‘Uninstalling the cover and receiver’). Take the cover and receiver to your JURA dealer.

Cleaning and maintenance

i Do not use harsh or abrasive cleaning agents or hard objects to clean the machine. This may damage the machine, the coating of the stainless steel container holder, and the stainless steel container.
i Please note that only the stainless steel container and the metal pipe are dishwasher-safe – all other parts (cover, adapter, etc.) are not.
→ Before cleaning the machine, remove the main plug from the power socket.
→ Clean the inside of the machine with a damp cloth.
→ Clean the outside of the machine with a damp cloth.
→ Rinse the stainless steel container and individual parts thoroughly under running water.
i If the cover and milk level sensor has not been used for a long period of time, clean the sensor thoroughly with a damp cloth and a mild liquid detergent before using it again.

Transport and environmentally friendly disposal

Transport
Keep the packaging for your Cool Control. It should be used to protect the machine during transport. Clean the stainless steel container before transporting it.

Disposal
Please dispose of old machines in an environmentally friendly way.

Old machines contain valuable, recyclable materials which should be recycled. Please, therefore, dispose of old machines via suitable collection systems.

Technical data

Voltage	100–240 V ~, 50–60 Hz
Safety test
Conformity symbol	**** CE0051
Power	25 W
Temperature range	Cools up to 25°C below the ambient temperature, but no

Addition for the Cool Control Wireless : This product satisfies the requirements of Section 15 of the FCC regulations. Operation is subject to the following two conditions:
(1) The product must not cause harmful inference.
(2) The product must be able to absorb received interference, including interference that could lead to malfunction.

JURA contact details / Legal information

JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Tel. +41 (0)62 38 98 233
@ You will find additional contact details for your country at www.jura.com.

Directives
The machine complies with the following directives:

2002/95/EC (RoHS)
1907/2006/EC (REACH)
2006/95/EC (Low Voltage Directive)
2004/108/EC (Electromagnetic Compatibility)
2009/125/EC (Ecodesign Directive)

Technical changes
We reserve the right to make technical changes.
The diagrams used in these instructions for use are for illustration purposes only and do not represent the original colors of the machine. Some details of your machine may vary.
Feedback
Your opinion is important to us! Use the contact link at www.jura.com.
Copyright
The instructions for use contain information that is protected by copyright. It is not permitted to photocopy these instructions for use or translate them into another language without the prior written consent of JURA Elektroapparate AG.