infobit iCam 200H 4K Ultra HD Camera with Auto Framing User Manual

: June 5, 2024
: infobit

Table of Contents

infobit iCam 200H 4K Ultra HD Camera with Auto Framing
Note
Supplied Accessories
Quick Start
About Product
Remote Control
Menu Settings
Maintenance and Troubleshooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

infobit iCam 200H 4K Ultra HD Camera with Auto Framing

Copyright Notice
All contents of this manual, whose copyright belongs to INFOBIT AV cannot be cloned, copied or translated without the permission of the company. Product specifications and information which were referred to in this document are for reference only. We may change, delete, or update any content at any time and without prior notice.

Note

Electric Safety
Installation and operation must accord with electric safety standard.
Use Caution to Transport
Avoid stress, vibration or soakage in transport, storage and installation.
Careful Installation
The product should be placed on smooth desktop. The shell of product is an organic material and is strictly prohibited from contact with any liquid, gas or solid material that may cause corrosion to the shell.
Do not Unauthorized Disassemble
This product has no parts which can be repaired by the user. The damage caused by the user’s own disassembly is not covered by warranty.

Specific frequencies of electromagnetic field may affect the image of the camera!

Supplied Accessories

When you unpack, check that all the supplied accessories are included:

Name	Quantity
Camera	1
USB Cable	1
Remote Control	1
User Manual	1

Quick Start

Please check connections are correct before starting.

About Product

4K Ultra High Definition
Support 4K ultra high definition, ultra high definition with ultra high resolution, the maximum can provide 4K@30fps/25fps image output, while down compatible with 1080p, 720p and other resolutions.
USB 3.0
Full function USB 3.0 interface, power supply, video, audio in one, it also can support two channels of USB video signal source and one channel audio source.
Wide Angle without Distortion
Lens Wide angle field of view up to 120 degrees, small lens, wide vision. At the same time support EPTZ, with unmovable brake, more larger, more clear.
WDR
It supports WDR, easy to cope with different lighting environments, no matter how harsh the environment can restore the most real you.
Built-in Microphone
With a built-in microphone array, you can pick up a full range of sounds, and pick up the sound distance up to 12 meters. The unique noise suppression algorithm makes your voice perfect.
Low Light
The application of 2D and 3D noise reduction algorithm greatly reduces the image noise. Even under the condition of ultra-low illumination, it still keeps the picture clean and clear, and the SNR of image is as high as 55dB.
Easy Installation
Standard damping rotary shaft support, suitable for market 100% monitor, easy installation, stable and reliable.

Product Specification

Model	iCam 200H
Name	4K Ultra HD Camera

Camera

Sensor

| 1/2.5”, CMOS,

Effective Pixel: 8.0M

Scanning Mode| ****

Progressive

Lens Mount	M12
Lens 1 (optional)	****

NA

Lens 2

| Lens Focus: f=2.8mm, Wide Angle: 120°
Minimal

Illumination

| 0.05 Lux @

(F1.8, AGC ON)

Shutter| 1/30s ~ 1/10000s

White Balance

| Auto, Indoor, Outdoor,

One Push, Manual, VAR

Digital Noise Reduction| 2D, 3D digital noise reduction
Backlight

Compensation

| ****

Support

USB Features

Operate System

| Windows XP / 2003 / VISTA/7/8/10, Linux,

Mac OS

Color / Compression| YUY2/MJPEG/H.264/ NV12

Resolution

| YUY2:

640×480 (default), 640×360, 960×540,

1280×720,

1920×1080 MJPEG:

3840×2160 (default), 160×120, 176×144,

320×240, 352×288,

640×480, 720×576,

1600×896,

1280×720,

Resolution

| 1024×768,

1024×576, 960×540,

848×480, 800×600,

800×448, 640×360,

480×272, 424×240,

320×180,

1920×1080 H.264:

1920×1080 (default), 320×240, 352×288,

640×480, 720×576,

1600×896,

1280×720,

1024×768,

1024×576, 960×540,

848×480, 800×600,

800×448, 640×360,

480×270, 424×240,

320×180,

3840×2160 NV12:

1920×1080 (default), 640×480, 1280×720,

640×360

---|---
USB Protocol| UVC 1.0 ~ UVC 1.5
UVC PTZ| Support (EPTZ)
Input/Output Interface
HDMI

Interface (optional)

| ****

1 x HDMI: Version 1.3

USB Interface

| 1 x USB 3.0: Type B,

female

Physical Parameter

Input Voltage| 5V (USB Power Supply)
Current Consumption| ****

0.5A (Max)

Operating

Temperature

| -10°C ~ 40°C

(14°F ~ 104°F)

Storage Temperature| -40°C ~ 60°C

(-40°F ~ 140°F)

Power

Consumption

| ****

3W

Size

| 194 x 34 x 42mm (without bracket)
Net Weight| 0.34 Kg
MTBF| ＞30000h

Interface and Button

Item	Name
1	HDMI Interface (optional)
2	USB 3.0 Interface

Remote Control

infobit-iCam-200H-4K-Ultra-HD-Camera-with-Auto-
Framing-3

Key Description

1. Standby Key
Press this button to enter standby mode. Press it again to enter normal mode.

Note: Power consumption in standby mode is approximately half of the normal

mode.

2. Number Key
To set preset or call preset.
*3. Key**
Used with other buttons.
on near object).

10. Selection Key
Press the button corresponding to camera you want to operate with the remote control.
11. # Key
Used with other buttons.
12. IR Remote Control Key
[]+[＃]+[F1]: Address 1 []+[＃]+[F2]: Address 2 []+[＃]+[F3]: Address 3 []+[＃]+[F4]: Address 4
13. Reset Key
Clear preset: Erase a preset position. [CLEAR PRESET] + Numeric button (0- 9)
14. Direction Control Key
After zoom, the lens moves in the direction indicated by the arrow. Press [HOME] button to face the camera back

to front.

15. Menu Key
MENU: enter or exit OSD MENU.
16. BLC (Backlight Compensation) Key
BLC ON/OFF: Press this button to enable the backlight compensation. Press it again to disable the backlight compensation.

NOTE:

Effective only in auto exposure mode. If a light behind the subject, the subject will become dark. In this case,

press the backlight ON/OFF button.

To cancel this function, press backlight ON/OFF button.

17. PTZ Reset Key
This function is only applicable to the PTZ cameras.

MENU
Press [MENU] button to display the main menu on the normal screen, using arrow button to move the cursor to the item to be set. Press the [HOME] button to enter the corresponding sub-menu.

MENU
Exposure
Color
Image
Focus
Noise Reduction
Setting
Information
Restore Default
Exit

EXPOSURE
Move the main menu cursor to [EXPOSURE], and press [HOME] key enter the exposure page, as shown in the following figure

EXPOSURE
Mode Full Auto
ExpCompMode Off
Gain Limit 6
Backlight Off
DRC Strength 1
Anti Flickerb50Hz
Return

Mode: Optional items: Full Auto, Shutter Priority, Bright. Shutter: Optional items: 1/30s, 1/60s, 1/90s, 1/100s, 1/125s, 1/200s, 1/250s, 1/350s, 1/500s, 1/725s, 1/1000s, 1/1500s, 1/2000s, 1/3000s, 1/4000s, 1/6000s, 1/10000s (Effective only in Shutter Priority mode). ExpCompMode: Optional items: On, Off (Effective only in Full Auto mode). ExpComp: Exposure compensation value, optional items: -7 ~ 7 (Effective only in ExpCompMode item to On). Gain Limit: Maximum gain limit, optional items: 0 ~ 15 (Effective only in Full Auto, Bright mode). Backlight: Optional items: On, Off (Effective only in Full Auto, Bright mode). Bright: Optional items: 0 ~ 17 (Effective only in Bright mode). DRC Strength: Optional items: 0 ~ 8. Anti Flicker: Optional items: Off, 50Hz, 60Hz (Effective only in Full Auto, Bright mode).

COLOR
Move the main menu cursor to [COLOR], and press [HOME] key enter the color page, as shown in the following figure.

COLOR
WB Mode
Auto AWB Sens
High Saturation
100% Hue
7 Return

WB-Mode: White balance mode, optional items: Auto, Indoor, Outdoor, One Push, Manual, VAR. AWB Sens: The white balance sensitivity, optional items: Low, Normal, High. R Gain: Red gain, optional items: 0 ~ 255 (Effective only in Manual mode). B Gain: Blue gain, optional items: 0 ~ 255 (Effective only in Manual mode). colortemp: Optional items: 2500K ~ 8000K (Effective only in VAR mode). RG Tuning: Red gain fine-tuning, optional items: -10 ~ +10 (Effective only in Auto, One Push, VAR mode). BG Tuning: Blue gain fine-tuning, optional items: -10 ~ +10 (Effective only in Auto, One Push, VAR mode). Saturation: Optional items: 60% ~ 200%. Hue: Optional items: 0 ~ 14.

IMAGE
Move the main menu cursor to [IMAGE], and press [HOME] key enter the image page, as shown in the following figure.

IMAGE Luminance
7 Contrast
9 Sharpness
3 Flip-H
Off Flip-V
Off Gamma
0.45 Style
Clarity LDC
10 Return

Luminance: Brightness adjustment, optional items: 0 ~ 14. Contrast: Contrast adjustment, optional items: 0 ~ 14. Sharpness: Sharpness adjustment, optional items: Auto, 0 ~ 14. Flip-H: Image flipped horizontally, optional items: On, Off. Flip-V: Image Flip Vertical, optional items: On, Off. Gamma: Optional items: Default, 0.45, 0.5, 0.56, 0.63. Style: Optional items: Norm, Clarity, Bright, PC, Clarity (LED), Face. LDC: Optional items: Off, -10 ~ 10.

FOCUS
Move the main menu cursor to [FOCUS], and press [HOME] key enter the focus page, as shown in the following figure

AF Sense: Optional items: Low, Medium, High.
Focus Area: Optional items: Bottom Half,
Middle Area, Upper Half, All.

NOISE REDUCTION
Move the main menu cursor to [NOISE REDUCTION], and press [HOME] key enter the noise reduction page, as shown in the following figure.

SETTING
Move the main menu cursor to [SETTING], and press [HOME] key enter the setting page, as shown in the following figure

SETTING Language
English EPTZ
On Zoom Limit
3x DVI Mode
DVI HDMI Format
1080P30 Tracking
Off Return

INFORMATION
Move the main menu cursor to [INFORMATION], and press [HOME] key enter the information page, as shown in the following figure

Maintenance and Troubleshooting

Camera Maintains Use soft cloth or tissue to clean the camera cover. Please use the soft dry cloth to clean the lens. If the camera is very dirty, clean it with diluted neuter detergent. Do not use any type of solvents, which may damages the surface. Unqualified Application No shooting extreme bright object for a long period of time, such as sunlight, light sources, etc. No operating in unstable lighting conditions, otherwise image will be flickering. No operating close to powerful electromagnetic radiation, such as TV or radio transmitters, etc

Troubleshooting