beamZ B1000 Bubble Machine Instruction Manual

: June 3, 2024
: beamZ

Table of Contents

B1000 Bubble Machine
UNPACKING INSTRUCTION
INSTALLATION
ACCESSORIES
TECHNICAL SPECIFICATION
Documents / Resources

B1000 Bubble Machine
Instruction Manual
Ref. nr.:160.570 beamZ B1000 Bubble Machine

B1000 Bubble Machine

Congratulations on the purchase of this Beamz bubble machine. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

Prior to using the unit, please ask for advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
The unit contains voltage-carrying parts. Therefore do NOT open the housing.
Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
The unit is not suitable for continuous use.
Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
When unplugging the unit from a mains outlet, always pull the plug, never the lead.
Do not plug or unplug the unit with wet hands.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet, and DO NOT switch the unit on. Contact your dealer. Do NOT connect the unit to a rheostat or dimmer.
To avoid fire and shock hazards, do not expose the unit to rain and moisture.
All repairs should be carried out by a qualified technician only.
Connect the unit to an earthed mains outlet (220240Vac/50Hz) protected by a 10-16Afuse.
During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the unit in humid rooms or outdoors.
During operation, the housing becomes very hot. Do not touch it during the operation and immediately after.
To prevent accidents in companies, you must follow the applicable guide lines and follow instructions.
Secure the unit with an extra safety chain if the unit is ceiling-mounted. Use a truss system with clamps. Make sure nobody stands in the mounting area. Mount the effect at least 50cm away from inflammable material and leave at least 1-meter space on every side to ensure sufficient cooling.
This unit contains high-intensity LEDs. Do not look into the LED light to prevent damage to your eyes.
Do not repeatedly switch the fixture on and off. This shortens the lifetime.
Keep the unit out of the reach of children. Do not leave the unit unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
Only operate the unit with clean hands.
Do not force the controls.
If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
Keep away from electronic equipment that may cause interference.
Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
Make sure that the main lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
The mains voltage is 220-240Vac/50Hz. Check if the power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this unit.
Keep the original packing material so that you can transport the unit in safe conditions

** This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.
DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks should be aware of the effects that this light effect may have on them.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!
NOTE:** To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling center. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving, carefully unpack the carton, and check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain the packing material for inspection if any parts appear damaged from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that a bubble machine must be returned to the factory, it is important that the bubble machine be returned to the original factory box and packed.
If the bubble machine has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

POWERSUPPLY
The label on the backside of the bubble machine indicated on this type of power supply must be connected. Check that the mains voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The bubble machine must also be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the bubble machine to a protected circuit (circuit breaker or fuse). Make sure the bubble machine has an appropriate electrical ground to avoid the risk of electrocution or fire.

INSTALLATION

CAUTION: Please consider the respective national norms during the installation! The installation must only be carried out by an authorized employee or dealer!
Attention:

Be sure that the bubble machine is positioned on a stable, non-slip surface.
Be sure that no ventilation slots on the product’s housing are blocked.
Don’t put any objects on the bubble machine.
Never connect the bubble machine to a dimmer or rheostat.
Keep the housing of this bubble machine dry at all times.
Do not spill water or other liquids into the reservoir.
Drain the reservoir before transporting or storing the product.
Never drink bubble liquid or use it on the inside or outside of a human body. If fluid gets in contact with the skin or eyes, rinse thoroughly with water and call a doctor immediately!
Keep out of the reach of children.
For indoor use only.

CAUTION: When installing the fixture, make sure there is no higher inflammable material (decoration articles, etc.) in between a distance of min. 20in or 0.5 meters. ****

FILLING RESERVOIR

Before filling unplug from the mains! ****

Step 1: Place the bubble machine on a flat-level surface.
Step 2: Fill the reservoir with “Beamz Bubble Liquid” (front of the machine). Make sure that you do not fill the reservoir above the fill line. Filling above the line will result in damage to the machine.
Step 3: After the usage, please empty the remaining liquid to prevent damage as well.
WIRELESS REMOTE CONTROL
The wireless remote control has 4 buttons. Press one of the buttons (A, B, C, or D) and the machine will produce bubbles as long as you press the button.

REPLACING THE FUSE
If the fuse is defective, replace the fuse with a fuse of the same type and value. Before replacing the fuse, unplug the main lead.
Procedure
Step 1: Open the fuse holder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder.
Step 4: Replace the fuse holder in the housing.

ACCESSORIES

High-quality bubble fluid, specially designed for Beamz bubble machines guarantees a trouble-free use with a lot of bubbles.

5-liter packaging, ref. no. 160.575
1-liter packaging, ref. no. 160.574

TECHNICAL SPECIFICATION

Rated voltage	: AC220～240V 50Hz
Heating element	: 40Watt
Tank capacity	: 1.8L
Fuse	: F1A
Dimensions	: 355 x 177 x 220mm
Weight (per unit)	: 1.38kg

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

Declaration of Conformity
Manufacturer: Troni| Tronios B.V.
Bedrijvenpark Twente 415
7602KM Almelo
The Netherlands
Phone: +31(0)85-1053155
Product number:| 160.570
Product Description:| B1000 Bubble Machine
Trade Name: BEAMZ| BEAMZ
Regulatory Requirement:| EN 60598-1
EN 60598-2-17
EN 61000-3-2/-3-3
EN 55015
EN 61547
I hereby declare that the product meets the requirements stated in Directives 2014/35/EU, 2014/30/EU 2011/65/EU and conforms to the above-mentioned Declarations.
Almelo,
04-09-2018
Name| : M. Velders
Signature|