Baseus AS070591A Smooth Writing Active Stylus User Manual
- June 5, 2024
- Baseus
Table of Contents
Baseus BS-PS001 Smooth Writing Active Stylus (Wireless Version) User
Manual
Please read this user manual completely and keep it properly
Product Diagram
Product Parameters
Name: Bases Smooth Writing Active Stylus (Wireless Version)
Model No.: BS-PS001
Main functions: Drawing, writing, taking notes, touch control, battery level
display (Bluetooth connection), double-tap shortcut function (Bluetooth
connection)
Material: Aluminum alloy barrel, POM plastic tip
Color: White
Size: 165.2 x9.1mm
Weight: About 14.7g
Battery Type: 68430
Battery Capacity: 130mAh
Accessories: 3A Type-C data cable white1, replaceable tip1, user manual*1
Compatible Model
Use Instructions
Bluetooth Connection:
- Press the power button on the stylus to turn on and when the blue indicator flashes, enter pairing mode;
- Go to “Settings” on your tablet, and enter “Bluetooth” choose “Baseus Pencil” to connect:
- After it’s successfully connected, the indicator stays blue, and pairing is completed.
Shortcut Button Customization:
- HOME Button
- Power Button
- Brightness +
- Brightness –
- Recently Used Programs
- Volume +
- Volume –
- Previous Page
- Next Page
- Mute
- Search
- Photograph
- Quick Screenshot
- Editable Screenshot
APP Connection:
- Please turn on the stylus, and connect to the Bluetooth;
- Download the Baseus App in the App Store;
- Add the stylus in the Baseus App, it’s under the Lifestyle & Office catalogue.
- Make sure the stylus is not connected to other device and the remaining battery is sufficient during the connection to the app;
- If the connection fails, please restart the stylus and try to re-connect;
- After you add the stylus in the app, enter the stylus interface and you can customize your own gestures for the settings
Use without Connecting to Bluetooth:
-
Press power button on the stylus, after 30s of flashing, the blue indicator will stay on, and then you can use the stylus;
-
When you press the power button again, the stylus will power off. After 5min of stand-by (not using the stylus), it will automatically turn off.
Use
-
You can use the stylus instead of your fingers to tap, drag on the screen. Or use it to write, draw in some apps.
-
Double-tap the shortcut control cap for more already set-up shortcut functions.
Battery Charging
You can charge the stylus battery in three ways.
- Please use a standard USB to Type-C cable to charge the stylus, (most charging cables or data cables for Android phones and tablets on the market now are applicable to this product) connect one end of the cable to the Type-C port on the stylus and the other to the USB port on a computer or tablet.
- Connect one end of a cable to the Type-C port on the stylus and the other to a 5V/1A adapter to charge the stylus.
- Use a 5V/1A power bank with Type-C, USB port to charge the stylus. The indicator will light up in red during charging, and it takes about 60 minutes to fully charge. After it’s fully charged, the red indicator will go out and light up in green.
Not edible, Not washable.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
It is hereby declared that BS-PS001, a product model of Shenzhen Times Innovation Technology Co., Ltd., complies with the provisions of Directive 2014/53/EU and Directive 2011/65/EU. The full text of the EC Declaration of Conformity can be found on the following website: www.baseus.com
This equipment complies with the provisions of Directive 2012/19/EU, 2006/66//EU. It is strictly forbidden to dispose of this equipment with ordinary trash; it must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment.
FCCID: 2A482-BS-PS001
GB 4943.1-2011
4000-712-711
www.baseus.com
Manufacturer: Shenzhen Bases Technology Co., Ltd.
Add: 2th Floor, Building B, Bases Intelligence Park, No.2008, Xuegang Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen
Executive Standard: GB 4943.1-2011
Hotline: +86-4000-712-711 Website: www.baseus.com
Designed by Baseus
Made in China
PB3544Z-POAO
1000043501