KLARSTEIN 10035486 Luca Food Processor Multifunctional Blender Blender Instruction Manual

KLARSTEIN 10035486 Luca Food Processor Multifunctional Blender Blender

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

TECHNICAL DATA

MANUFACTURER & IMPORTER (UK)

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited Unit 6 Riverside Business Centre Brighton Road Shoreham- by-Sea BN43 6RE United Kingdom

SAFETY INSTRUCTIONS

• Before use, check the voltage on the device badge and connect the device only to sockets which correspond to the voltage of the device. If you are not sure whether your connections meet the requirements, consult an electrician or your power supplier.

• Always turn the motor off before plugging the motor into an electrical outlet.

• To prevent electric shock, never completely immerse the base in water or other liquids.

• If the power cord is damaged, it must be replaced by the manufacturer, an authorized service center, or a similarly qualified person.

• Do not bend the power cord or allow it to hang over the work surface to prevent it from getting caught.

• Do not place the appliance near open stoves, hot ovens, or easily flammable materials such as curtains or textiles.

• Before use, place the appliance on a stable, level surface.

• Children 8 years of age and older, mentally, sensory and physically impaired persons may only use the device if they have been thoroughly familiarized with
  its functions and safety precautions by a supervisor responsible for them and understand the associated risks.

• Ensure that children do not play with the device.

• Place the device as close as possible to the power source so that you can pull the plug quickly and easily if necessary.

•  Check the power cord regularly for damage. Do not use the unit with the power cord damaged.

• Only use the unit indoors and for the specified purpose.

• Keep children away from the unit and stow it out of the reach of children.

• Do not use the device without contents and only under supervision.

•  Do not touch any moving parts with your hands during use.

• Keep the operating instructions and pass on the device only with the operating instructions.

• Only use original accessories.

• Unplug the appliance from the wall outlet before cleaning or discontinuing use.

• Switch off the appliance and disconnect the plug before changing or removing any moving parts.

• The unit contains parts that are not accessible to the user. Do not remove any covers and do not attempt to repair the unit yourself. Repairs may only be carried out by qualified specialists.

•  Do not connect the unit to multiple sockets, external timers or remotely controlled sockets.

Note: The device is only designed for short-term operation, i.e. it should not be operated continuously for more than 4 minutes. Then switch off the unit and let the motor cool down before switching it on again.

PROGRAM SELECTOR SWITCH

This appliance has the following program settings: “Manual Speed” (M), On & Off (0), “Auto program”.

Note: If you turn the knob to “0”, the appliance stops operating and all functions are reset.

COMMISSIONING AND OPERATION

Before Use

• Before connecting to the power, recheck the type of supply and the mains voltage match with the details given on the rating label on the appliance.
• Using for the first time, rip off all wrapping paper and plastic bags. Clean the fittings.

Commissioning

• Before you plug the power plug into the power outlet, set the rotary control to “0” and only then set the rotary control to the desired position. The functions are not available if the knob is not turned to the “0” position when the power is turned on. This is a safety function to prevent accidents, which could cause the appliance to start unexpectedly.

Manual control for variable speed

1.  Press the knob down to start the function. If you press the knob again, the function will stop.
2. The speed can be adjusted using the control bar.
3.  The manual function can be used for all accessories.

Pulse control

1. Move the knob to the position and press and hold the knob to start the function.
2. As soon as you release the knob, the operation will stop.
3. This function can be used for all accessories.

Ice Crusher

1. Move the knob to the position and press the knob down to start the function. Press the knob again to stop the function.
2. This function is suitable for the blender.

Smoothies

1. Move the knob to the position and press the knob down to start the function. Press the knob again to stop the function.
2. This function is suitable for the blender.

Dough mixing

1.  Move the knob to the position and press the knob down to start the function.
2. This function is suitable for the plastic blade.

Note: Due to different ingredients in the recipes you use, the performance of the appliance may vary. You can also use the manual control to get the best result.

Chopping

1. Move the knob to the position and press the knob down to start the function. Press the knob again to stop the function.
2. This function is suitable for the stainless steel blade.

Note: Due to different ingredients in the recipes you use, the performance of the appliance may vary. You can also use the manual control to get the best result.

Auto Clean

1. Put 3-4 drips of detergent into the bowl and add a maximum of 800 ml of water.
2.  Insert the stainless steel or plastic blade and close the lid.
3. Turn the knob to the position and press the knob down to start the function.

USING THE ACCESSORIES

Using the Knife Blades

The two knife blades supplied are versatile.

For the stainless steel knife blade:

• Do not fill food into the appliance in one piece, but cut it into pusher size pieces first.
• Do not run the appliance for more than 3 minutes at a time, otherwise it may overheat. Then turn the appliance off and let it cool down for at least 30 minutes.
• For the stainless steel knife blade, the “Chopping” (Auto program) is recommended.
• Use the “Pulse” control for coarser foods.

program) / Max.
Garlic| Without skin| 250 g| ca. 30-60 s| Pulse / Chopping (Auto program) / Max.
Carrot| < 2 x 2 cm| 250 g| ca. 30-60 s| Pulse / Chopping (Auto program) / Max.
Meat| < 2 x 2 cm,

without bone

| 250 g| ca. 30-60 s| Pulse / Chopping (Auto program) / Max.

For the plastic knife blade:

• Do not run the appliance for more than 2 minutes at a time, otherwise the motor may overheat. Then allow the appliance to cool down for at least 30 minutes before using the appliance again.
• It is recommended to use the „Dough Mixing“ (Auto program)
• Use a maximum of 500 g flour and 300 g liquid.

Flour / water

| Flour

Water

| 200 g

120 g

| Dough mixing (Auto program)

Mixing of cake batter

| Eggs Margarine Sugar Flour

Baking powder

| 1 piece

50 g

50 g

50 g

1 g

|

Dough mixing (Auto program)

• Follow the steps shown in the figure below to assemble the appliance.
•  Make sure that the bowl in step 2 and the lid in step 5 are properly secured, otherwise the appliance cannot be operated.
•  In step 3, the stainless steel knife blade or the plastic knife blade can be used. Make sure that the appropriate accessories are properly secured to the shaft.
• After use, the appliance can be disassembled again in the opposite order.
• Only open the lid when the blades have stopped completely.

Assembly with the Knife Blades

Using the Slicer/Julienne/French Fried Potato Blade

• Pay attention to the capacity line of container. Once the food approaches the max line on the container, please stop operation and pour out food.
• Switch on and push the food down evenly with the Pushers. Never put your fingers in the feed tube!
• Do not run the appliance for more than 3 minutes at a time, otherwise the motor may overheat. Then allow the appliance to cool down for at least 30 minutes before using it again.

Food

|

Suggested quantity

|

Processing time (minutes)

| Speeds
---|---|---|---
Julienne Disc| Slicer Disc| French Fried Potato Disc
Carrot| 500 g| approx. 1 min| Speed 1| Speed 1| N/A
Potato| 500 g| approx. 1 min| Speed 1| Speed 1| Speed 2
Zucchini| 500 g| approx. 1 min| Speed 1| Speed 1| N/A
Leek| 500 g| approx. 1 min| Speed 1| Speed 1| N/A
Beetroot without skin|

500 g

|

approx. 1 min

|

Speed 1

|

Speed 1

|

N/A

•  Follow the steps shown in the figure below to assemble the appliance.
• Ensure the bowl in step 2 and the lid in step 6 are locked well, otherwise the appliance will not operate.
•  One of the three blades can be inserted in step 4. Make sure that the appropriate accessories are properly attached to the blade holder.
•  After use, the appliance can be disassembled again in the opposite order.
• Be careful when handling the blades, as they are very sharp.
• Only open the lid when the blades are completely stopped.

Assembly with Slicer Blade / Julienne Blade / French Fried Potato Blade

Assembly

Disassembly

Using the Grinder

•  Do not run the appliance for more than 30 seconds at a time, otherwise the motor may overheat. Allow the appliance to cool down for at least 30 minutes after use.
• Use the grinder for milling coffee beans, Almond so on similar food.
• It is recommended to use the pulse control .
• Follow the steps shown in the figure below to assemble the appliance.
• In step 1, make sure that the silicone ring is correctly inserted into the grinder cup. Then, in step 2, screw in the blade base.
• Make sure that the grinder cup is properly secured in step 4, otherwise the appliance will not operate.
• After use, the appliance can be disassembled again in the opposite order.
• Only take the grinder from the appliance when the blade is completely stopped.

Assembly with the Grinder

Using the Blender

• Do not run the appliance for more than 2 minutes at a time, otherwise the motor may overheat. Allow the appliance to cool down for at least 30 minutes before the next use.
• Never open the lid while the blade is still rotating. As a precaution, also unplug the power cord from the wall outlet before removing the lid.
• To add liquid ingredients during processing, remove the measuring cup of the lid and pour liquid through the opening in the lid.
•  Cut solid ingredients into smaller pieces before you process them.
• For a large quantity, pour small batches of ingredients instead of a large quantity at one time.
•  Use cooked ingredients for a soup preparation.
• If a liquid is hot or tends to foam (e.g. milk), do not put more than 1 liter in the blender jar to avoid spillage.
• If the result is not satisfactory, switch the appliance off and stir the ingredients with a spatula.
•  For best results, use the maximum speed or pulse control.
• Follow the steps shown in the figure below to assemble the appliance.
• Make sure that the jar is fixed properly in step 2, otherwise the appliance cannot be operated.
• After use the appliance can be disassembled again in the opposite order.
• Always be careful when handling the Stainless steel blade as they are very sharp.
• Only open the lid when the blades are completely stopped.

Assembly with the Blender

Using the Emulsifying Disk

• Do not run the appliance for more than 2 minutes at a time, otherwise the motor may overheat. Allow the appliance to cool down for at least 30 minutes before using it again.
• Use the emulsifi ying disk for aioli, instant pudding, mayonnaise, whipping cream, whisking eggs, egg whites, and sponge cake mixtures.
•  For egg white whisking, use room temperature eggs. Ensure the bowl and emulsifying disc is dry and free from grease. It is recommended to use the manual control at maximum speed to get the best performance.
•  For whipping cream, cool the cream in the fridge at least 24 hours, and use the cream in cool status. It is recommended to use the manual control at maximum speed to get the best performance.
• Follow the steps shown in the figure below to assemble the appliance.
• Ensure the bowl in step 2 and the lid in step 6 are fixed properly, otherwise the appliance cannot be operated.
•  After use, the appliance can be disassembled again in the opposite order.
•  Only take the disc from the appliance when the disc is completely stopped.

Assembly with the Emulsifiying Disk

Using the Citrus Juicer

Use this citrus juicer to squeeze the juice from citrus fruits (e.g. oranges).

• Pay attention to the capacity line of container. Once the food approaches the max line on the container, please stop operation and pour out food.
• Do not run the appliance for more than 3 minutes at a time, otherwise the motor may overheat. Allow the appliance to cool down for at least 30 minutes before reusing it.
• To get the best performance, press the orange not only vertical by also on left or right side.
• Follow the steps shown in the following figure to assemble the appliance.
• Make sure that the bowl in step 2 and the juicer in step 5 have been fixed properly, otherwise the appliance cannot be operated.
• After use, the appliance can be disassembled again in the opposite order.
• Only take the juicer from the appliance when the juicer is completely stopped.

Assembly with Citrus Juicer

CLEANING

Automatic cleaning

• Clean the bowl with the Stainless steel blade or the plastic blade with “Auto Clean“ (Auto program) .

Cleaning the appliance
Follow the steps below to clean the appliance:

• Unplug the power cord from the wall outlet.
• Do not immerse the housing the motor under water.
• Do not use any abrasive detergents.
•  Only use a damp to clean the outside of the housing.
•  Components that have come into contact with food can be cleaned with soapy water.
• Allow the parts to dry thoroughly before reassembling the appliance.

TROUBLESHOOTING

bowl/blender. Please ensure bowl and lock are securely locked into position.

If the motor still will not start, check the power cord and power outlet.

French Fried Potato Julienne Disk is blocked.| Always clear any blocked potato from the chipper disc before processing more potatoes.
Some food remains on the disc after processing.| It is normal for small pieces to remain after processing.
Motor slows down when mixing dough.| Amount of dough may exceed maximum capacity. Remove half and process in two batches. Do not add more than

250 g dough.

Dough is too dry.| Running appliance and add water through feed cube, 1 tablespoon at a time until dough cleans the inside of the processing bowl.
Problem| Possible Solution
---|---
Dough is too wet.| Running machine and add flour through feed cube, 1 tablespoon at a time until dough cleans the inside of the processing bowl.
Motor slows down when using the chopping blade.| Amount of meat may be too much. Remove half and process in two batches.

Note: For the best result, trim the meat of fat before processing.

Vibrates/moves during processing.| Clean and dry the rubber feet at the bottom of the appliance.

Also make sure that the maximum load capacity is not being exceeded.

HINTS ON DISPOSAL

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.

References

• Klarstein | Your home. Your kitchen. Your style.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>