Laifen Swift Hair Dryer User Manual

Laifen Swift Hair Dryer

IMPORTANT SAFETY INSTRUCTIONS

BEFORE USING THIS APPLIANCE, READ ALL INSTRUCTIONS AND CAUTIONARY MARKINGS IN YOUR USER MANUAL AND ON THE APPLIANCE.

WARNING

• The hair dryer, filter, and attachments contain magnets, keep away from implanted medical devices such as pacemakers and defibrillators as they may be affected by strong magnetic fileds.
• Do not use the hair dryer on babies.
• Do not allow children to use the hair dryer without the supervision of adults.
• Do not use the hair dryer for any other purpose than drying hair.
• Do not use the hair dryer near flammable and explosive materials.
• Do not use the hair dryer or touch the plug with wet hands.
• Do not submerge the hair dryer into any liquid.
• Do not use the hair dryer in high humidity or high-temperature environments.
• Do not use the hair dryer near bathtubs, showers, basins or other vessels containing water.
• When the hair dryer is used in the bathroom, unplug it after using. It is also recommended to install a Residual Current Device(RCD)/GFCI, with a residual operating current not exceeding 30mA, in the electrical circuit supplying the bathroom.
• Laifen hair dryer has overheat protection. if the device overheats, it will automatically turn off. Please unplug the device and leave it to cool down.
• Do not obstruct the air inlet, this may cause overheating and may present a fire hazard.
• The air outlet and attachments are hot during usage, do not touch them before they cool down.
• Do not use the hair dryer if the plug or wire is damaged.
• Do not wrap the wire around the hair dryer.
• Do not stretch the wire.
• Do not unplug the hair dryer by pulling on the wire.
• Please keep the wire away from hot surfaces.
• After using or before cleaning the hair dryer, please unplug it.
• Do not use any detergents, lubricants, air freshers or polishes on the hair dryer or attachments.
• Do not disassemble, repair or replace any part of the hair dryer by yourself.
• Do not use the hair dryer if it has been dropped in water or damaged.

Product Features

Laifen Digital Motor
The Laifen digital motor spins up to 110000 rpm, propelling the airflow up to 22m/s fast drying.

Smart Thermo-control System
The smart thermo-control system measures airflow temperature over 100 times per second to protect your hair from extreme heat damage.

Hair-caring Ionic Technology
The ionic generator produces 200 million/cm3 of ionic to neutralize static electricity for smooth and glossy hair.

Hot-Cold Air Circulation Mode
Press the temperature control button for 1 second to start the hot-cold air circulation mode. Hot air and cold air alternates every 2 seconds.

Noise-reducing Technology
Modulate the frequency of motor noise to a range that human ears cannot perceive. Only the sound of wind will be heard.

• 22m/s is the speed of hot air near the air outlet

Functions Instruction

The instruction photo, accessories and user’s interface are for reference. Your product may appear differently. Please refer to the actual product for further information.

Speed Settings

Move up and down this button to shift the airflow speed. Ensure the Power button is set at OFF before connecting to power.

Parameters

Attachment

Laifen High-Speed Hair Dryer The magnetic attachment is easily clipped on and off the device. Simply move the concentrator close to the hair dryer iron ring, it will clip on due to the magnetic force and can be rotated into any position.

Optional

(only available in some models)

Styling nozzle: for styling straight hair during drying.

Diffuser nozzle :
for styling curly hair during drying.

Maintenance

• Filter should be cleaned and maintained regularly to avoid damage, ensuring that the air inlet is always clean and clear of blockage.
• Ensure to turn off the hair dryer and unplug it before cleaning the filter cover.
• The Air inlet filter cover is held in place by a magnet. To remove it, hold the handle firmly and gently pull the filter cover downward.
• Never wash the filter with water or any other liquid.
• Clean the outter filter cage and inner filter with dry cloth or soft brush.
• After cleaning, mount the filter cage back to the filter, until a soft click noise is heard.

Hazardous Materials

Component

| ****

Lead (Pb)

| ****

Mercury (Hg)

| ****

Cadmium Cd

| Hexavalent chromium (Cr(VI))| Polybrominated biphenyl (PBB)| Polybrominated diphenyl ethers (PBDE)
---|---|---|---|---|---|---
Plastic part| O| O| O| O| O| O
Metal part| O| O| O| O| O| O
Heater Matrix| × (1)| O| O| O| O| O
Motor Assembly| × (1)| O| O| O| O| O
Circuit Controller Component| × (1)| O| O| O| O| O
Wire&Cable| O| O| O| O| O| O
Assessories| O| O| O| O| O| O

The table complies in accordance to SJ/T 11364 standard

• O: Indicates that this hazardous substance contained in all of the homogeneous materials used for this part is within the limit requirement in GB/T26572
• X: Indicate that this hazardous substance contained in at least one of the homogeneous materials used for this part exceeds the limit requirement in GB/T26572

1. The hazardous substance contained is exempted under the EU RoHS directives exemption list(2011/65/EU)

• This means that within 10 years of use, this product could be considered environmentally friendly.

Troubleshooting

Does not function when turn on

| Blue light ring flicker warning| Inner components overheat| Turn it off and restart it after 1 minute,if it does not work, send it back for repair
Yellow light ring flicker warning| Inner components damaged| Send back for repair

Red light ring flicker warning

| Air inlet or outlet blocked| Clean air inlet and outlet
A protection programme is started| Do not turn on and off continuously or repeatedly
Input Voltage Error| Check the electricity supply voltage

No light indication

| Power not connected| Check wire and plug

Function when turned on

| Light ring PCB damaged| ****

Send back for repair

No reaction when pressing the hot wind button| The hot air button damaged
Heater gets red| Controller PCB damaged
Wire or plug overheat| wire damaged or plug loose
Smelled burnt when working| Inner components damaged

Return Policy

30-Day Unconditional Return Service Laifen offers a 30-day unconditional return service. Within 30 days from the date of purchase, you can contact us to return your hair dryer and to be refunded.

To be eligible for a refund, you must:

• Return the hair dryer with all accessories and gifts. Return them in their original packaging.
• Provide valid proof of purchase.
• Ensure the hair dryer and accessories are resealable.

Returns shipping costs

• For returns for reason of product quality issues, Laifen will carry the shipping costs.
• Returns for any reason other than product quality issues, the buyer should carry the shipping costs.
• Returns for any reason other than product quality issue, buyers should assume responsibility for any damage or loss incurred in transport.

Warranty

Laifen 2-year guarantee
Laifen provides a 2-year guarantee for your hair dryer. In 2 years from the date of purchase, if your hair dryer cannot work due to defects of materials or workmanship, we will repair or replace it for you.

The following situations are not covered:

• Purchase from unauthorized resellers.
• The warranty period is expired.
• Without proof of purchase.
• The hair dryer has been modified, altered or repaired unofficially.
• Use the hair dryer for any other purpose than drying hair.
• Damage is caused by operations that are not per the Laifen user manual. Damage caused by any misuse or accident.
• Damage caused by excessive usage is considered as normal wear and tear.

Note:
This appliance is for household use and is not intended for business purposes. Using this appliance for professional or commercial purposes, or outside of “normal use” will invalidate the guarantee. Outside of “normal use” means more than two hours per day.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>