CORRO PROTEC Powered Anode Rod Instructions

: July 2, 2024
: CORRO-PROTEC

Table of Contents

CORRO PROTEC Powered Anode Rod
FAQ
Read this manual
Safety Information
Tools Required
Installation Steps
Maintenance
FAQ
WARRANTY
Contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CORRO PROTEC Powered Anode Rod

CORRO-PROTEC-Powered-Anode-Rod-product

FAQ

Q: How often should I check the condition of the anode rod?
- A: It is recommended to inspect the anode rod every 6-12 months to ensure it is functioning correctly and replace it if necessary.
Q: Can I use the Corro-Protec Powered Anode Rod in any type of water heater?
- A: The Corro-Protec Powered Anode Rod is designed for RV water heaters and compatible with tanks featuring a 3/4 NPT thread.

Corro‑Protec and the planet thank you!

By installing a Corro‑Protec Powered Anode Rod in your water heater, you have just made a concrete gesture to reduce overconsumption. Your tank will last longer and be more efficient in the long run, without requiring any maintenance, chemicals, and negative environmental impact!

Read this manual

Inside you’ll find many helpful hints on how to install and maintain your Corro‑Protec Powered Anode Rod.

You’ll find several answers to common questions in the FAQ section.
If you have general questions about the Corro‑Protec Powered Anode Rod, you can visit corroprotec.com/faq or contact us at info@corroprotec.com.
You can also consult this manual online by scanning this code : or visit corroprotec.com/installation-guide.

Safety Information

Your safety and the safety of others are very important. There are many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

Warning

This is the safety alert symbol. Recognize this symbol as an indication of Important Safety Information! This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER”, “WARNING”, “CAUTION” or “NOTICE”. These words mean:

DANGER

An imminently hazardous situation that will result in death or serious injury.

WARNING

A potentially hazardous situation that could result in death or serious injury and/or damage to property.

CAUTION

A potentially hazardous situation that may result in minor or moderate injury.

NOTICE

Attention is called to observe a specified procedure or maintain a specific condition.

Important safety information

Please read before using the product.

WARNING: For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury,or loss of life.

Be sure to read and understand the entire Installation, Troubleshooting & Warranty manual before attempting to install or operate this Powered Anode Rod. It may save you time and money. Pay particular attention to the Safety Information. Failure to follow these warnings could result in serious bodily injury or death. Should you have problems understanding the instructions in this manual, or have any questions, STOP, and get help from a qualified service technician, or the local electric utility.

Please read this manual entirely before installing or operating the Corro‑Protec Powered Anode Rod.
Use this appliance only for its intended purpose as described in this Installation, Troubleshooting & Warranty manual.
Be sure your appliance is properly installed in accordance with local codes and the provided installation instructions.
DO NOT attempt to repair or replace any part of your Corro‑Protec Powered Anode Rod unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

Tools Required

CORRO-PROTEC-Powered-Anode-Rod-fig-2

Teflon tape
Universal pliers
Ratchet wrench
- (you can also use an adjustable wrench)
1 1/16” (27 mm) and 1 3/16” (31 mm) 6-point sockets
Phillips screwdriver (flat head)

Installation Steps

This Corro-Protec Powered Anode Rod model is perfectly designed for Suburban and Mor-Flo water heaters, all of which have standard ¾” NPT threads.
If you’ve ordered the wrong model for your tank, don’t worry.
Please visit corroprotec.com/help and we’ll make sure you get the correct model.

NEED ASSISTANCE?

Email us: info@corroprotec.com
Call us: 1-877-466-6660

Turn off the power sources.
- 120 volts and battery switches.
- CAUTION: ELECTRICITY
Turn off the water supply.
Locate the water heater outside of the RV.
Locate a regular power outlet.
- The Corro‑Protec power supply cord is 12 feet long. This should be enough to reach an outlet.
- If you cannot reach the power outlet, consider having a new one installed by a professional electrician who will ensure proper installation according to the electrical code. If this is not possible, consider our 12 volts battery power supply, which can be connected to your RV battery instead of a power outlet.
Locate the sacrificial anode rod.
- Uncertain about the location of the existing anode?
- Consult your digital or printed water heater owner’s manual for easy guidance.
Unscrew the sacrificial anode rod counterclockwise using a ratchet wrench fitted with a 1 1/16” socket.
- NOTICE: Use a 1 1/16” hexagonal (6 points) socket to avoid damaging the anode head.
- CAUTION: HOT WATER
- HOT SURFACE
  If you are having some difficulties removing the sacrificial anode, here’s some tips:
1. Use a breaker bar or add a PVC pipe to your wrench to create a leverage effect.
2. Use an impact wrench.
Slowly remove the existing sacrificial anode rod using pliers.
You can keep the sacrificial anode in a safe place in case you need it in the future or dispose of it.
- DANGER: Handling the rod can cause HEAT INJURIES; proceed with caution.
- CAUTION: PLEASE DISPOSE IN A SAFE WAY and as per your municipality environmental waste regulations.
Write down the Corro‑Protec Powered Anode Rod serial number: ………………………….
- It is located on the stainless steel part of the anode.
- You’ll need this information for the warranty registration.
Cover the threaded part of the Corro‑Protec Powered Anode Rod with Teflon tape.
- Apply 5 to 6 layers of Teflon tape counterclockwise.
Insert the Corro‑Protec Powered Anode Rod and screw it by hand.
- Make sure the threads are aligned before screwing.
- If the anode isn’t screwing in easily, check for and clear any sediment or buildup on the threads.
- If the anode thread is too big for the hole, you might have an Atwood water heater and need our model with a ½” NPT thread instead of ¾”.
- Please contact us for further assistance.
Screw the Corro‑Protec Powered Anode Rod clockwise using a ratchet wrench fitted with a 1 3/16” socket.
If you have enough clearance, you can use an adjustable pipe wrench to install the anode.
- NOTICE: DO NOT USE EXCESSIVE FORCE WHEN TIGHTENING.
Insert the female connection in the exceeding end-piece of the Corro‑Protec Powered Anode Rod and crimp it down using universal pliers.
Install the black grounding connection on one of the tank screws.
Turn on water supply and make sure the tank is full.
- When refilling the water heater, always open a hot water faucet to allow any trapped air to escape.
Turn on the power sources.
- 120 volts and battery switches.
Connect the power supply to a regular outlet.
- If you cannot reach the power outlet, consider having a new one installed by a professional electrician who will ensure proper installation according to the electrical code. If this is not possible, consider our 12 volts battery power supply, which can be connected to your RV battery instead of a power outlet.
- The indicator light located on the power supply will automatically light up after a few seconds.

If the green indicator light doesn’t turn ON

To ensure the Corro‑Protec Powered Anode Rod works, the following conditions must be met:

The power supply must be connected.
The Corro‑Protec Powered Anode Rod must be connected to the power supply.
The ground eyelet must be installed on the water heater, as indicated at step #13.
The water heater must be functional (full of water, air purged, and operational).

If the above conditions are met and the indicator light is still not lit up, please visit corroprotec.com/help or call us at 1-877-466-6660 and we will make sure your system is operational.

Maintenance

Effortless annual check-up with Corro‑Protec!

With our Corro‑Protec system, annual maintenance is a breeze. All you need to do is take a moment each year to confirm that the green indicator light is ON.
This indicates the optimal amount of current is flowing within your tank. It’s our way of assuring you that our protection against corrosion is active and robust. Simply put, a glowing green light means your tank is protected.

FAQ

Frequently Asked Questions

Do I have to unplug the Corro‑Protec Powered Anode Rod if I turn off the hot water for several months?

The Corro‑Protec Powered Anode Rod does not require any special maintenance. Leave it connected at all times, and it will work only if necessary. Even if you turn off the hot water tank, if there is still water in the tank, the Corro‑Protec Powered Anode Rod will remain functional to prevent corrosion. If you empty the tank, the anode will turn off automatically because the water acts as a conductor between the anode and the ground. A powered anode does not function as a heating element. There is no danger in emptying the water from the tank without disconnecting the anode.

Can I use the Corro‑Protec Powered Anode Rod if I have a water softener?

Yes, it is even highly recommended to install a powered anode if you have a water softener. The water softener generally makes the water more aggressive to the tanks, which reduces the lifespan of your hot water tank and creates a more conducive environment for the development of sulfur-reducing bacteria which creates the rotten egg smell in hot water. The Corro‑Protec Powered Anode Rod will automatically adjust to provide optimum rust protection.

What is the annual power consumption of the Corro‑Protec Powered Anode Rod?

Since the amount of current used by the anode will vary from region to region due to the hardness of the water, it is impossible to give an exact answer. However, on average, the anode will use 3 KWh per year. If we take the average price of electricity in the United States, the cost to run the anode 24 hours a day all year round is under US$ 1.

Is it normal to read a voltage lower than what is indicated on the Corro‑Protec Powered Anode Rod power supply?

Yes, because the voltage adjusts automatically depending on the conductivity of your water. A very low voltage means that your water is very conductive and the anode does not need to send much current to provide adequate protection.

WARRANTY

Activate your FREE 20-YEAR WARRANTY

CORRO-PROTEC-Powered-Anode-Rod-fig-13

Activate your 20-year warranty by registering your Corro‑Protec RV Powered Anode Rod at corroprotec.com/warranty or by scanning this code within 90 days of receipt of your original purchase.
If you choose not to register, rest assured, your product automatically comes with a 5-year Limited Warranty. But here’s why you should register:

EVERLASTING PROOF: Digital receipts can disappear and paper ones fade. Registration is your permanent record.
HASSLE-FREE CLAIMS: We want the warranty claim process to be as smooth as possible. Registration ensures we have all the info we need to assist you swiftly.
OUR AIM? Making sure your warranty experience is flawless and aligned with our promise of top-notch service. And don’t forget, even without registration, you’re still backed by a 5-year Limited Warranty. Make the most of your Corro‑Protec experience!

Our True Promises

Our Powered Anode Rod system is crafted to effectively prevent corrosion inside your RV water heater tank. But remember, while we take pride in our 20-year warranty on the Powered Anode system’s performance, this doesn’t extend to the entire water heater.

Different water heaters, depending on their production and quality, might require other parts to be replaced over time, regardless of our corrosion protection. We can’t warranty the entirety of a water heater—after all, we don’t manufacture them. We focus on what we do best : preventing internal corrosion. However, maintenance on other components, unrelated to corrosion, might still be necessary.

Furthermore, our product is not just built to last; we back its durability with a 20-year warranty period. Always keep in mind : our commitment is to the efficacy and longevity of our product, not to external factors beyond our control.

Our Transparent Warranty

What’s covered ? Our commitment is to the integrity and functionality of the Corro‑Protec Powered Anode system.
We guarantee it against defects in material or workmanship when installed and operated as intended. The anode you purchased should be installed in an RV water heater, not a residential water heater. Installing an RV anode rod in a residential water heater is not considered to be installation and operation as intended.

How Long Is the Warranty Valid ? For installations in a recreational vehicle, we offer a complimentary 20-year Extended Warranty. This no-cost extension is our way of ensuring that you can enjoy long-term protection and support for your product without worry. By registering your product on our website within 90 days of purchase, you help us safeguard your warranty service for the future. This simple step guarantees that even if your original purchase documents are misplaced over the
years, we can still verify and honor your warranty claim. If the product is not registered, the standard 5-year warranty remains in place.

Does Corro‑Protec Warranty My Water Heater ? It’s simple logic : we only vouch for what we create. While we’re proud of Corro‑Protec system’s top-tier quality, we can’t guarantee the entire water heater since we don’t manufacture it. Just as you wouldn’t warranty something you didn’t craft, neither can we. Our focus remains on ensuring our product excels in its role within your water heater. Water heaters, depending on their make and quality, might require other parts to be replaced over time, irrespective of our corrosion protection. We focus on what we do best : preventing internal corrosion. However, maintenance on other components, unrelated to corrosion, might still be necessary.

Corro‑Protec’s Limited Warranty

Corro‑Protec (“Company”) guarantees to the original purchaser (“Customer”) that the Powered Anode system (“Product”) is free from defects in materials and workmanship under normal use and conditions for the duration of the Warranty Period, subject to the following provisions.

WARRANTY PERIOD

Base Warranty: The Product carries a five (5) year warranty from the date of original purchase (“Base Warranty Period”).

Extended Warranty: The Customer has the option to extend the Base Warranty Period on the anode rod to twenty (20) years (“Extended Warranty Period”) at no additional cost for products installed in a recreational vehicule, contingent upon registering the Product on the Company’s website within ninety (90) days of purchase. If the Product is not registered within this period, the Base Warranty Period remains in effect. The Extended Warranty is complimentary, ensuring our ability to validate warranty claims long into the future, even if the original purchase documentation is lost.

REMEDIAL MEASURES AND DEGRESSIVE COVERAGE EXPLANATION

If a defect due to material or workmanship is found during the Warranty Period, the Company will, at its discretion, repair or replace the defective Product or component. The coverage is degressive over the Extended Warranty Period :

Full coverage is provided for the first 5 years.
Starting year 6, coverage is reduced by 5 % each year, meaning that at year 15, coverage would be at 50 %.
In a scenario where the anode rod is found defective at year 15, the Company will cover 50 % of the cost of repair or replacement. The Customer will be responsible for the remaining cost. The replacement part will inherit the remainder of the original Product’s Warranty Period or ninety (90) days from the service date, whichever is greater.

WARRANTY EXCLUSIONS

This Limited Warranty does not cover any damage or defects that arise from :

External causes such as accidents, abuse, misuse, or unauthorized modifications.
Usage outside of the Product’s operational instructions or specifications.
Damages from acts of nature, like floods, fires, and earthquakes.
Regular wear and tear or consumables, unless they are due to defects in materials or workmanship.
Services or repairs performed by anyone other than an authorized Corro‑Protec service provider.
The water heater or components not manufactured by Corro‑Protec.

OTHER INFORMATION

Claims Procedure: To initiate a warranty service, the Customer must notify the Company within the Warranty Period and make suitable arrangements for the performance of service. Initial shipping costs for returning the Product are the Customer’s responsibility; however, the Company will bear the shipping costs for returning the Product to the Customer following the repair or replacement if the claim is valid.

Limitation of Liability: The Company’s obligation under this warranty is limited to repair or replacement services. IN NO EVENT WILL THE COMPANY BE LIABLE FOR INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES.

Additional Rights: This Limited Warranty grants specific legal rights. The Customer may have other rights, which vary from state to state or province to province. Certain jurisdictions do not allow the exclusion or limitation of incidental damages, so such limitations may not apply.

Governing Law: The laws of the state or province of purchase govern this Limited Warranty.

Warranty Registration: The Extended Warranty is activated upon registration of the Product on the Company’s website at corroprotec.com/warranty within ninety (90) days of purchase.