ESR iPad 10th Generation Case with Keyboard User Manual
- June 14, 2024
- ESR
Table of Contents
User Manual
iPad Keyboard Case
Connection Instructions
How to connect the keyboard?
1. Push the power switch button to ON position to turn on the keyboard. Then press “Fn” plus “C” at the same time.
2. Open the iPad setting
3.Turn on the bluetooth of your ipad, then search -1 “Bluetooth Keyboard” for the device, choose “Bluetooth Keyboard” option in the searching page to adapt.
4.Connection succeeded.
Installation and Removal Case
- Removing back protective piece:hold iPad on both sides and use thumbs to gently push off the back cover(see photo.)Cover is held in place by two tabs.
- Proceed to “peel” cover away from iPad.
- Take iPad out.
- Take iPad out upwards
(1) (2)
(3) (4)
Keyboard Overview
- Protective case
- Magnetic stripe
- USB charging
- Power switch
- CAPS light
- PAIR light
- CHRG light
- Touchpad
Main screen Decrease screen brightness
Virtual Keyboard Keyboard switching
Next tune Mute
Lock screen Delete
Increase screen brightness Search
Previous tune Play/Pause
Volume down Volume up
(5) CAPS Light| Press the Caps Lock on the keyboard, the indicator light
is blue.
---|---
(6) PAIR Light| Press Fn+C to enter Bluetooth pairing, the light flashes
blue, and the pairing is completed and goes out.
(7) CHRG Light| Battery low: Slowly flashes red.
Charging: Steady red.
Charge complete: Green light
Turn the touchpad function on/off
Use the key combination to turn the touchpad on or off.
Backlight Control
Press to adjust backlight brightness
Press to switch between seven colors.
Touchpad Functions
Note: Please upgrade iPad to the latest iOS system (13.4.1 and above is the best)
Trackpad Gestures|
iOS System
---|---
| Single Click – Press the trackpad with one finger until you feel a click
| Click and Hold – Press and hold the trackpad with one finger
| Drag – Click and hold an item then slide the finger across the trackpad to
move it
| Wake iPad – Click the trackpad or press any key on your external keyboard
| Dock – Swipe the pointer past the screen bottom with one finger to access
the dock
| Home Screen- You can swipe down with single finger to the bottom to pull up
your dock or you can click the home indicator (the horizontal line) at the
bottom of the screen on Face ID-equipped iPad models to launch the home screen
| Silde Over- You can slide right with one finger to show it and slide it back
right again to hide it
| Scroll Up or Down – Swipe up or down with two fingers
| Scroll Left or Right – Swipe left or right with two fingers
| Zoom – Place two fingers near each other on the trackpad, then spread them
apart to zoom in or bring them closer together to zoom out
| Go Home – Swiping up with three fingers
| Today View – Get to the first Home screen, then swipe right with two fingers
| Search – Swipe down with two fingers on any Home screen
| Secondary Click -Tap with two fingers to show the contextual menu for Home
screen icons, email messages, the Camera button in Control Center and other
items, or you can press the control key on your external keyboard.
| Control Center – Move the pointer with one finger to highlight the iOS
status icons in the top-right corner of the display, then click the trackpad
or swipe up with one finger
| Notification Center – Move the pointer with one finger past the top of the
screen near the middle. Alternatively, highlight the iOS status icons in the
top-left corner of the display, then click the trackpad or swipe up with one
finger
| Screenshot- Tap and hold with four fingers
| App Switcher – Swipe up with three fingers, then pause before lifting them.
As an alternative method, place four fingers near each other on the trackpad
then bring them closer together, pausing before you lift the fingers
Charging
- The keyboard charging port is TYPE-C charging port, the input of the voltage can not exceed DC-5V the keyboard will be broken if the voltage exceed the limit.
- Connect the TYPE-C plug of the charging cable to the keyboard charging socket the other side is connected to the charger of the tablet PC or the charging interface of the tablet PC charges the keyboard.
- Please charge it for at least 3 hours before using for the first time and then charging at least 2 hours when it is low battery in the future.
- The green indicator light flashes: low battery, please charge it on time.
- When charging, please check whether the charging port is powered normally.
Note: Please do not charge the keyboard for a long time. Keeping it plugged in for a long time will deplete the keyboard’s battery life
Packing List
- iPad Keyboard
- Keyboard Case
- Type-C Charging Cable (No Charger)
- Keyboard Manual
Technical Specifications
| Operating voltage | 3.0-4.2V |
|---|---|
| Length of operation | ≥5 hours |
| Stand-by current | ≤ 1mA |
| Battery capacity | About 500 mAh |
| Button life | 3 million taps |
| Connection distance | ≤10m |
| Recharging current | ≤300mA |
| Reconnect time | 5 seconds |
| Pairing password | No |
| Number of keys | 78 keys |
| Sleep current | ＜40uA |
| Working current | ≤85-120mA |
| Low battery alarm | 3.0-3.3V |
| Stand-by time | ≤180 days |
| Battery Life | 2 years |
| Keystroke | 50-70g |
| Charging port | Type c interface |
| Charging time | 2-3 hours |
| Wake-up time | ≤2 seconds |
| Operating temperature | -10℃~55℃ |
Safety Caution
- Keep the item away from sharp objects.
- Do not place heavy object on the keyboard.
- Away from microwave items.
- Do not force or distorted the keyboard.
- Keep away from oil, chemical or other organic liquid, items.
FAQ
The LED indicator did not light up when the keyboard was turned on.
The keyboard battery is empty. Charge it according to the instructions in the “Charging” section.
The tablet did not find the keyboard.
Make sure you have pressed the “Connect” button. You should see a flashing blue LED. If the LED indicator is not flashing, the keyboard will not be visible to your device.
Pairing failed. The keyboard is in the list of searched available wireless devices.
Turn off the keyboard and delete it from the search list on your tablet. Then start the search again and perform a new pairing.
The keys do not work after pairing.
Check the input setting of the tablet. Make sure that all the settings are ON. If not, change the setting.
If the pairing between the keyboard and tablet PC is failed or wrong character and typing delayed.
Delete all the Bluetooth device on the tablet PC -Switch off the Bluetooth function on the tablet PC -Reboot the tablet PC; then switch on Bluetooth function on your tablet PC and pair again.
Contact Us
If you have any use problems with our keyboard, please do not hesitate to contact us via qulose@outlook.com. Please rest assured that we will definitely help you solve them!
The device is provide with one-year limited hardware warranty from the purchase day.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>