BRISTAN MI 3-4 C Mila Pair Of Bath Taps Instruction Manual
- June 4, 2024
- BRISTAN
Table of Contents
BRISTAN MI 3-4 C Mila Pair Of Bath Taps
Installation
Operation
Specifications
Tools You’ll Need
Prior to Installation
- All products manufactured and supplied by Bristan are safe to use provided that they are installed, operated and receive regular maintenance in accordance with these instructions.
- This product needs to be installed in accordance with, and meet the requirements of the Water Supply (Water Fittings) Regulations 1999 and current by-laws. For full
- Installation Requirements & Notes (IRN) please visit wras.co.uk/directory.
- Isolation valves must be fitted to the inlet water supplies to ensure ease of future maintenance.
- Before installing this product the water supply must be thoroughly flushed in order to remove any swarf, solder etc. Full access must be made available for future maintenance/ servicing purposes.
- This product must not be modified in any way as this will invalidate the guarantee.
- If in doubt, contact a registered plumber, your Local Water Authority or the Secretary of the Institute of Plumbing, address as follows:-
- The Institute of Plumbing, 64 Station Lane, Hornchurch, Essex,RM12 6NB, Tel: 01708 472791
Spare Parts
To replace any spare parts for your tap, why not scan the QR Code or
visit www.bristan.com
and search for your product.
Maintenance – Clean/Replace Outlet
General Cleaning
- Bristan products are made from premium materials, with hand polishing and electroplated finishes.
- Your taps or shower should be regularly cleaned with warm water, a mild pH-neutral liquid soap, and polished with a soft cloth. Any residues from soap, toothpaste, shampoos and shower gels can cause blemishes if not rinsed off straight after use.
- Household bleaches and cleaners
- contain harsh chemicals and may damage the surface finish. Avoid using abrasive cloths, scouring pads, scrub sponges, steel wool or anything similar.
- Some surfaces such as nickel and pewter may be affected by the dye found in some cloths, so it is also important to avoid hanging cloths on spouts.
Maintenance – Valve Cleaning
Troubleshooting
|
---|---
Symptom| Cause| Remedy
No flow or low flow rate
| Partially closed isolation valve.| Open isolation valve.
Instantaneous water heater cycles on and off as flow rate or pressure is too
low.| Increase water flow rate or pressure through system.
Head of water is below the minimum distance required.| Refer to specification
for minimum distance required.
Hot or cold water being drawn off elsewhere causing pressure changes or
instantaneous boiler temperature changes.| Do not use other water outlets when
using the taps.
Airlock or partial blockage in the supply pipework.| Flush through pipework to
ensure removal of debris and any airlocks.
Water dripping from taps| This is normal for a short time after us- ing the
taps.| This is caused by residual water tension, the build up of water in the
tap body.
If water continues to drip,
possibly due to the ceramic disc valves
| Remove valves and clean, refer to ‘Maintenance’ section before starting any
maintenance.
Taps do not turn on| Closed isolation valve.| Open isolation valve.
Mains water supply turned off.| Turn on mains water supply.
Our Guarantee
At Bristan, we want to make things as easy as possible for our customers.
That’s why we offer solid guarantees on all our products, effective from the
date of purchase, to give you peace of mind.
To start your free guarantee simply scan the QR code and register your
product.
Alternatively visit
www.bristan.com/register.
For any other queries, please call our Customer Service on 0330 026 6273 where
our expert team of advisors will be able to offer you any help and advice.
For full guarantee terms and conditions visit www.bristan.com/service-
centre/guarantees.
Bristan Group Ltd.
UK: Bristan Group, B78 1SG. EU: Masco Europe S.à.r.l. 14 Rue Strachen 6933
Mensdorf Luxembourg
Customer Service: +44330 026 6273
Web: www.bristan.com
Email: enquire@bristan.com
References
- ekat.com - Dichtungen, Schläuche, Gummi und Kunststoff
- Water Regulations Approval Scheme Ltd - Approvals Directory
- Home
- Register a product
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>