logitech 960-001226 Rally 4K PTZ Conferencing Camera User Guide
- June 5, 2024
- Logitech
Table of Contents
RALLY CAMERA
Setup Guide
WHAT’S IN THE BOX
| 1. Camera | 5. Power Splitter |
|---|---|
| 2. Camera Mount | 6. Power Adapter |
| 3. Power Splitter Case | 7. USB Cable |
| 4. Remote | 8. Documentation |
WHAT’S WHAT
CAMERA
| 1. Remote Pairing Button | 5. MIPI |
|---|---|
| 2. USB | 6. Tripod Thread |
| 3. Status LED | 7. Expansion Slot |
| 4. Security Slot |
REMOTE
| 1. Video Mute | 4. Camera Presets |
|---|---|
| 2. Pan/Tilt | 5. Zoom In/Out |
| 3. Camera Home |
CONNECT YOUR CAMERA
Connecting Rally Camera is the same whether you plan on using a dedicated computer in the room, or your team members bring a laptop to the room to run the meeting
- Plug the power splitter USB pigtail into the USB port of the camera
- Connect the power adapter from the power splitter to a wall outlet
- Connect the USB cable from the power splitter to your computer
- The status LED will flash when the camera is connecting Once complete, the camera head will rotate
- If issues persist, consult www.Logitech.com/support/rally camera or call technical support
MOUNT YOUR CAMERA
We offer a number of options to mount your Rally Camera For video calls, we recommend placing the camera as close to eye level as possible Best results typically come from mounting below the T V
-
Place on a table or shelf near the TV
-
Mount on the wall:
a. Attach wall mount to the wall Please use the appropriate screw type for your wall type
b. Insert the power splitter into the power splitter case and route cables as shown
c. Thread the USB pigtail through the hole in the bottom of the mount and connect to the camera
d. Latch the power splitter case to the mount
e. Secure the camera to the mount via the tripod screw -
Mount to the TV: An optional The TV mount bracket is available at www.Logitech.com
STARTING THE VIDEO CALL
To start a video call/capture session, start your application of choice and select the Rally Camera The status LED will illuminate when the video is streamed
PAN AND TILT
Press once for incremental movement or press and hold for continuous pan and
tilt
Caution: Manually rotating the camera the head may damage the device
CAMERA PRESETS
Set up to 2 preset positions Once in the desired position, save a preset by pressing and holding the button for 3 seconds Return to the desired position at any time by pressing the button once
HOME
Home will be the position the camera moves to when the camera is started Save a new Home position by holding the button for 10 seconds
CAMERA SETTINGS APPLICATION
Use this program to control the camera pan, tilt, zoom, focus, and image
quality (like brightness and contrast) The software can be downloaded from
www.logitech.com/support/rallycamera
RIGHTSIGHT
RightSight automatically moves the camera and adjusts the zoom to comfortably frame meeting participants RightSight is available on Windows 10 and macOS 10 14+ To enable or disable RightSight, download the Logitech Sync application by Pressing the pan, tilt or zoom buttons on the remote will disable RightSight Pressing the home button will restart RightSight
PAIRING THE REMOTE
Your camera and remote control are paired at the factory, However, if you need to pair a remote to the camera (such as when replacing a lost remote) do the following:
- Press and hold the button on the back of the camera until the LED flashes blue
- Press and hold the Video Mute button on the remote for 10 seconds to place it in pairing mode
- Once the remote and camera are paired the LED will stop flashing
- If the pairing fails, the LED will keep flashing Start from step 2 and repeat
FOR MORE INFORMATION
You can find additional information on Rally including:
- FAQs
- Firmware Upgrades
- Software Downloads
- Support Community
- Warranty Information
- Replacement Parts
- And more at
www.logitech.com/support/rallycamera
Questions
Click to Live Chat