KLARSTEIN 10035233 KRAFTPROTZ Meat Grinder Instruction Manual

KLARSTEIN 10035233 KRAFTPROTZ Meat Grinder

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following hints to avoid damages. Any failure caused by ignoring the items and cautions mentioned in the instruction manual is not covered by our warranty and any liability. Scan the QR code to get access to the latest user manual and other information about the product.

TECHNICAL DATA

SAFETY INSTRUCTIONS

• This device may be only used by children 8 years old or older and persons with limited physical, sensory and mental capabilities and / or lack of experience
  and knowledge, provided that they have been instructed in use of the device by a responsible person who understands the associated risks.

• The device is not intended for commercial use, but only for household and similar environments. This includes kitchens in offi ces, farms, hotels, motels and Bed & Breakfasts.

• Disconnect the plug before assembling or disassembling the appliance.

• Only use the appliance under supervision when children are present.

• When moving the unit, hold it by the housing with both hands. Never hold it by the hopper plate or any other part of the unit.

• When using the Kibbeh attachment (for minced meat rolls), do not attach a cutter or perforated discs.

• Do not grind hard food such as bones or nuts in the mincer.

• Do not crush fibrous foods such as ginger in the mincer.

• Do not allow the mincer to run for more than 10 minutes at a time. Let it cool for 10 minutes before using it again.

• Wait 30 seconds after finishing the current process before using the reverse switch. Doing so may damage the unit.

• To avoid blockages, do not press the meat into the funnel under excessive pressure.

• Never attempt to replace or repair permanently installed parts of the appliance yourself.

WARNING
Risk of injury! Never push the meat into the funnel by hand. Always use a food pusher.

BEFORE FIRST USE

• Before use, check the voltage on the device badge. Connect the device only to sockets which correspond to the voltage of the device.
• Wash all accessories with warm water and a little detergent.
• Before plugging the appliance into a wall outlet, make sure that the appliance is switched off.

PRODUCT OVERVIEW

1. Food pusher
2. Hopper plate
3. Case
4. REVERSE button
5. LOW button
6. HIGH button
7. STOP & RESET button
8. Fixing ring
9. Head connection
10. Head
11. Snail
12. Perforated disc (fine)
13. Cutting blades
14. Perforated disc (medium)
15. Fixing ring
16. Perforated disc (coarse)
17. Sausage attachment
18. Kibbeh attachments
19. Funnel (fine)
20. Funnel (medium)
21. Funnel (coarse)

ASSEMBLY AND OPERATION

Mincing meat

WARNING
Risk of injury! Never push the meat into the funnel by hand. Always use a food pusher.

Cut all food into pieces. We recommend that you use tendonless and boneless meat and cut it to a size of approximately 2 x 2 x 6 cm so that it fi ts easily into the funnel opening.

• Press the HIGH or LOW button to run the unit at high speed (HIGH) or low speed (LOW).
• Push the food into the funnel with the food pusher.
• After use, press STOP to stop the appliance. Remove meat residues by pressing the REVERSE button. Then pull the plug out of the socket.

Reverse function
If a blockage occurs, press and hold the REVERSE button for 3-6 seconds. Then release the button. Unplug the appliance and remove the food from the head of the appliance.
Making Kibbeh (minced meat rolls)

Agredients

Stuffing:| For the rolls:
Mutton 100 g Olive oil 1 ½ tbsp Onion 1 ½ tbsp Flour 1 ½ tbsp Spices to taste Salt to taste| Lean meat 450 g Flour 150-200 g Spices to taste Nutmeg 1 tsp Paprika to taste Pepper to taste
Chop the meat three times for the filling and three times for the rolls and mix the

minced meat with the remaining ingredients in a bowl.

Fill the finished minced meat rolls with the minced meat filling as shown below and fry or deep-fry them.

Making sausages
Place the cutting knife, one of the perforated discs (fine, medium, coarse) and the corresponding funnel (fine, medium, coarse) on the screw shaft and screw the fastening ring tight.

Thread the sausage skin onto the sausage filling tube and knot the end. Make sure that the sausage casing is loosely filled, as the sausage expands during frying or cooking and the casing can tear open. Press the sausage together at the end with your fingers and turn it once or twice around its own axis.

DISASSEMBLY

• Make sure that the engine is completely stopped.
• Disconnect the plug from the socket.
• Disassemble the parts by performing steps 1-6 in reverse order (see below).

Note: It is easier to remove the perforated disc by inserting a screwdriver between the cutting blade and the perforated disc to loosen it.

CLEANING AND CARE

• Switch off the device and unplug the plug from the socket.
• Allow the appliance to cool down completely.
• Clean the housing with a damp cloth using a mild detergent. Never clean the housing under running water and never put it in water.
• Do not clean the unit with caustic or abrasive cleaning agents.
• The attachments are not dishwasher safe. These parts should only be cleaned in warm water with a small amount of detergent.
• When you have finished cleaning, attach the cable to the cable holder on the back and store the unit in a dry, clean place where children have no access.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.

MANUFACTURER & IMPORTER (UK)

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited Unit 6 Riverside Business Centre Brighton Road Shoreham- by-Sea BN43 6RE United Kingdom

References

• Klarstein | Your home. Your kitchen. Your style.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>