Shenzhen Huamao Technology HM 008 8 In 1 Multifunctional Wireless Charger Instructions
- June 5, 2024
- Shenzhen Huamao Technology
Table of Contents
Shenzhen Huamao Technology HM 008 8 In 1 Multifunctional Wireless
Mobile phone
- iPhone 13/13 Mini/13 Pro/
- 13 Pro Max/ 12/ Pro/ mini
- Pro Max/ SE 2020/ 11/
- 11 Pro 11 Pro Max /I XS
- XS Max XR/X/8 Plus /8/
- 7 Plus 7/6 Plus,Pad mini 5/
- 4,iPad Pro Galaxy s21/
- S21+/ S21 Ultra Galaxy
- S10 S10+/S10e/ S9/s9+/ S8/
- S8+,Note 20 /20 Ultra/ 10/
- 9/8, Pixel 3a/3XL /3/2 XL/2, and More Google Pixel 3 and later
- Watch
- Apple Watch 7
- Apple Watch SE
- Apple Watch Series 6 Apple Watch Series 5 Apple Watch Series 4 Apple Watch Series 3 Apple Watch Series 2
- Earphone
- Airpods Pro
- Airpods 2
- The others Qi enable earbuds
Packing list: Multifunctional wireless charger1 power cord (1.5M)1 user manual*1
Multifunctional Wireless Charger Instruction
Notes
- Avoid using this product in damp, humid or high temperature places.
- Avoid the product falling from a height.
- Do not disassemble the product by yourself. Please contact us if necessary.
- Do not clean the product unless the equipment is powered off.
Steps for usage
- Please plug in the attached power cord to turn on the power supply, the indicator light will turn green for 10 seconds and then turn off.
- In the wireless charging area of the mobile phone, you only need to put the mobile phone on it to charge.
- In the wireless charging area of the watch, you only need to place the watch in the charging area and hold the watch to charge it.
- In the earphone charging area, you just need to plug your earphone box into the charging port below the watch to charge it.
- The 5 charging ports on the side of this product only need to plug in the charging cable to connect to the mobile phone, and the tablet can be charged. Schematic diagram of LED indicator light
- Green light: on for 10 seconds After the product is plugged into the power cord, the green light wil be on for 10 seconds
- The red light: is always on foreign object detection. If the product is abnormally charged, the red light will be on
- Green light: on for 10 seconds After the phone starts to charge wirelessly, the green light is on for 10seconds
Product function diagram
Specifications
- Input: AC 90-240V 50/60HZ 1A,
- Watch wireless charging output: 3W 3*USB-A output; 5V/2.4A Working temperature: O-40 degrees Celsius
- Mobile phone wireless charging output: 5W 7.5W 10W Headphone box electrical output: 3W
- 2*USB-C output; 5V/3.5A
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure:
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.