ORVIBO S2 Smart Door Lock User Manual

June 9, 2024
ORVIBO

ORVIBO S2 Smart Door Lock

ORVIBO-S2-Smart-Door-Lock-PRODUCT

Special Attention:

  1. Mechanical keys please keep outdoor, just in case keys lock in doors.
  2. Please replace for the battery when low wattage alarm.
  3. Reading this manual carefully before installation, and keep it for future reference.

Introduction

Lock structureORVIBO-S2-Smart-Door-Lock-FIG 1

Packing List

Check the following drawing to check whether the package contains all the parts

NO. Name Qty NO. Name Qty
1 Front Panel 1 9 M5*30mm Screw Stub 2
2 Back Panel 1 10 M5*35mm Screw Stub 2
3 Mortise 1 11 M5*30mm Screw 2
4 Card 3 12 M5*40mm Screw 2
5 Mechanical Key 2 13 Sliding Screws:M5*11mm 2
6 User Manual 1 14 Mortise Screws:M5*10mm

(For Aluminum Door)

| 4
7| 57MM Square Shaft| 1| 15| Mortise Screws:M4*20mm

(For Wooden Door)

| 5
8| 67MM Square Shaft| 1| | 16| Spring| 1

Specifications

Suitable for

Models

| S2| ****

Doors Applicable

| Aluminum door

Wooden door

---|---|---|---


Materials

| Handle:SS304 Panel:SS304| ****

Working Voltage

| ****

6V/4x AA Batteries


Lock Weight

| 2KG| Door Thickness

to Fit

| 35-60mm



Unlocking Way

| Bluetooth Fingerprint(option) Password

Card  Mechanical key

Gateway(option)

| ****


Data Capacity

| ****

Fingerprint:200 Password:150 Card:200


Color

| Silver

Black

| Working

Temperature

| -10℃-55℃


Low Wattage Alarm

| ****

Less than 4.8V

| ****

Working Humidity

| ****

0-95%

System Initialization

Open the cover plate of the front panel ,long press the “Reset” button on the back panel for 5s, press “000#”,and the initialization is complete

Replace BatteryORVIBO-S2-Smart-Door-Lock-FIG 3

Loosen the screws at the bottom of the rear panel clockwise

Installation

Turn the handle

Notice: Adjust the handle according to the direction you open the door.

For Front Panel:ORVIBO-S2-Smart-Door-Lock-FIG 4

  1. Turn the handle on the front panel loosen the screws on the handle counterclockwise
  2. Remove the handle
  3. After adjusting the direction of the handle insert it into the handle seat and re-lock the screw of the handle to the complete the turning

For Back Panel:ORVIBO-S2-Smart-Door-Lock-FIG 5

  1. Turn the handle on the front panel loosen the screws on the handle
  2. Remove the handle
  3. After adjusting the direction of the handle insert it into the handle seat and re-lock the screw of the handle to the complete the turning

Installation Diagram(For 3585)

  • Step 1 Install Mortise Insert the screw into the hole and fix it
  • Step 2 Install Sliding Screw Casing and Square Shaft
1. Choose a screw column suitable for the thickness of the door install it on the front panel
2. Install waterproof in alignment with the holes
3. Install the square shaft, put on the U-Clip, The arrow is in the same direction as the handle
  • Step 3 Install Front Panel Align the front panel of the installed accessories with the holes of the door and install

  • Step 4 Install Back Panel
    Install another waterproof pad to the rear panel

  • Step 5 Connect Front and Back Panels Wires

1. Fix the front and back panels with screws suitable for the thickness of the door
2. Connect the front power cord to the back panel
  • Step 6 Install the Battery
1. Install 4* AA batteries
2. Install the battery cover

Operation

Registration

The software (iOS version) can be downloaded from the app store, and the Android versio n can be downloaded from the application store of Google play. ORVIBO-S2-Smart-Door-Lock-FIG 12

Connect lock to the phone

  1. please scan the QR code to download the app
  2. You can also search for TTLock in the APP store(Google Play)to download
  3. Register a new account (phone number or email) or login with an existing account.
  4. Touch the lock screen to light, click “+ Add Lock”
  5. The lock nearby will appear on the phone screen, Click “+”
  6. Re-name the lock
  7. The lock added successfullyORVIBO-S2-Smart-Door-Lock-FIG 13
    TTlock users can register the account by mobile phone and Email which currently support 200 countries and regions on the world. The verification code will be sent to user’s mobile phone or email, and the registration will be successful after the verification.

Add locks
TTLock supports multiple types of lock devices. The lock needs to be added by the app after entering the add mode. Generally, a lock that has not been added, as long as the lock keyboard is touched, it will enter the add mode. The default password is 123456 if not added by the phone.ORVIBO-S2-Smart-
Door-Lock-FIG 14

User Management

Bluetooth management
Make sure there is no problem with Bluetooth communication. After connecting the phone to the door lock as above, Click “ “to unlock.(the phone is within 5meters from the door lock)

Setting Passcode
Passcodes are also a way to unlock. After entering the passcode on the locked keyboard, press the unlock button in the lower right corner to unlock. Passcodes are divided into permanent, time-limited, single, clear, cycle, and custom.(You can share the Passcode to other user via WeChat、SMS、Email、Messenger、WhatsApp)ORVIBO-S2-Smart-Door-Lock-FIG
16

Send e-Key

Click on the “ ” as shown in figure, you can send the eKey to other users of TTlock to authorize the unlock(the receiver must be download the APP and set up an account)→ Select e-key format (Timed, permanent, One-time, Recurring) → Enter recipient’s account of TTlock,set the name and effective time of the eKey, Can choose to allow remote unlocking or disallowing, authorized administrator or not authorized, as shown in figure →Send→The recipient’s account has Bluetooth unlock permission.ORVIBO-S2-Smart-Door-Lock-FIG
18

Add card
Supports opening doors through various IC cards. Before an IC card is used to open the door, it needs to be added first. The adding process needs to b e performed by the app beside the lock.The validity period of the IC can be set, it can be permanent, or it can be limited in time.ORVIBO-S2-Smart-Door-Lock-
FIG 19

Add fingerprint
The premise that a fingerprint can be used to open a door is that it needs to be added first. The adding process needs to be performed by the APP beside the lock. The fingerprint expiration data can be set, it can be permanent, or it can be limited. After setting ,you can modify its validity period.ORVIBO-S2
-Smart-Door-Lock-FIG 20

E-Key management

Click “ “ The manager can delete ekey, reset ekey, send and adjust the ekey, meanwhile he can search the lock record.

Passcode management
Click “ ” .All generated passwords can be viewed and managed in the password management module. This includes a password change, password deletion, password reset, and password unlock record.

Unlock records

Click “ “you can query your unlock record as shown in figure ORVIBO-S2
-Smart-Door-Lock-FIG 24

Gateway management(Optional)
The TT lock is directly connected via Bluetooth, that is why it is not attacked by the network. The gateway is a bridge between smart locks and home WIFI networks. Through the gateway, the user can remotely view and calibrate the lock clock, read the unlock record. Meanwhile, it can remotely delete and modify the password.

Add GatewayORVIBO-S2-Smart-Door-Lock-FIG 25

Manual
After a short period of time, you can see which locks are in their coverage in the app. Once the lock is bound to the gateway, the lock can be managed through the gateway

FAQ

  1. How to read operation records? In the Records of the main interface. .

  2. Why can’t I unlock it after open the passage mode

| You need to perform an unlock verification in any method, then the passage mode will take effect.
3) What is the purpose of Auto Lock| You can set how long to lock after unlocking
| a) In this case, first check that the positive and negative electrodes of the battery have been installed upside down, whether the battery has enough power.
4)After installation, touch sensing keyboard, screen no respond| b) Remove the back panel and see if it’s connected.
| c) To eliminate the above situation, you need to remove the lock ,check whether the wires of the lock body are squeezed, and

the re-wire.



5)Unable to register fingerprint

| Check the fingers for dirt or wear, check the fingerprint head on the lock for dirt and oil stains, etc.

Check to see  if  the  fingerprint  is working

properly(Press to see if there is any responds.

6)What is the reason why the smart lock consumes fast power?| a)    Large standby power consumption

b)    Short circuit

7)There is no response to pressing the handle on outside the door, and there is unlock normally on inside the door, but the verification is normal, and the motor is normal.| ****

It may be the triangle direction on the clutch was error, please check correction.


8)How many times will the password be locked? How long is it locked?

| Enter the wrong password more than 5 times in a row, the keyboard is locked for 5 minus, Other ways to can open the door

FCC

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
    To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Guarantee

  • Customer Name:
  • Customer Calls :
  • Purchase Date :
  • Product Name :
  • Product Model :

Note:

  1. Please keep this card so that you can use it when you need warranty service.
  2. We provide you with a one-year warranty from the date of purchase.
  3. This warranty service is valid for customers in any country in the world.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals