GLEN SA 9012 N Glass Kettle User Guide
- June 5, 2024
- GLEN
Table of Contents
GLEN SA 9012 N Glass Kettle
IDENTIFY YOUR KETTLE SA 9012 N
USING YOUR KETTLE
- To open the lid press the button and lift upward until it stands vertically. DD NOT BEND LID FURTHER BACK. To close press down the lid firmly.
- Remove all packaging, stickers or other accessories from the inside and outside of the kettle.
- Adjust the length of the cord by winding it under the base. Wedge the cord in the slot.
- Place the base on a clean cool and smooth surface.
- Fill the kettle with the required amount of water and place the kettle on the base. Never fill water above the MAX line, else boiling water will push out of the pouring spout. This can cause severe injuries and burns.
- Connect to the mains and turn on the switch. The blue Indicator light will turn ON and the kettle begins to heat the water.
- The kettle will turn off automatically once the water has boiled.
- Ensure that the kettle has stopped or turn it off manually before removing from the base.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>