GLEN SA 4018 Cold Press Slow Juicer User Guide
- June 5, 2024
- GLEN
Table of Contents
SA 4018 Cold Press Slow Juicer
User Guide
IDENTIFY YOUR COLD PRESS SLOW JUICER SA 4018
PARTS NAME AND FUNCTION
S. No. | Parts Name | Function |
---|---|---|
1 | Dust Cover | Cover The juice cup assembly, and prevent The dust under the |
condition of no use.
2| Pusher| For pushing the food.
3| Feeding Tube| Cover with a feeding tube.
4| Squeezing Screw| Auger for squeezing the fruits and vegetables.
5| Strainer Assembly Fine| Fine strainer for fruits and vegetables.
6| Bowl| Juicer bowl.
7| Outlet Cap Assembly| Cap for regulating the juice flow.
8| Pulp Filter| For filtering the pulp.
9| Juice Container| Juice collecting container.
10| Basic Unit| The main motor unit.
11| Strainer Assembly Coarse| For more pulp in juice and leafy vegetables.
12| Cleaning Bruch| For cleaning the strainer hole.
13| Pulp Container| For collecting the pulp.
14| Power Cord| For Power connection.
USING YOUR SLOW JUICER STRAINER **
**
COARSE STRAINER
The bigger holes of the strainer produce thicker juice when tender and soft
fruits are extracted such as strawberries, kiwis, and tomatoes. It is useful
to extract more pulpy juice and can also be used for dry leafy vegetables and
wheatgrass.
FINE STRAINER
The smaller holes stainer is used for all fruits and vegetables when you need
less pulp in the juice. The juicer is also provided with a stainless steel pulp
fitter on the Juice collector in case clearer juice is required. Assembling
the Juicer
Place the juicing bowl onto the motor base with the center hub over the shaft
of the base. When connecting the juicing bowl to the motor base, ensure that
the 3 holes in the bottom of the juicing bowl align with the 3 lugs of the
motor & rest properly. Install strainer assembly (the triangle mark on the
strainer assembly must be aligned with the one on the bowl marking
triangle/unlock). The arrow is at the top of the strainer and the arrow is in
the front of the bowl which is to align.
Align the juice squeezing screw with the center of the strainer assembly &
then rotate a little and insert it downward.
Strainer Assembly and Auger if not fixed properly the feeding tube will not
lock and the juicer will not start, so fix the same properly. Align the
triangle on the feeding tube with the unlock mark on the juicer bowl, then
rotate clockwise, and align the triangle with the lock mark so it, is
completely locked. Otherwise, it will not start. Place the container on both
sides of the juice outlet and pulp outlet, and put the pusher on. The juicer
is now ready.
Do not put fingers, spoons or chopsticks, and other things into the inlet
of a feeding tube. BUTTON SWITCH FUNCTION IMPORTANT: If the juicing
bowl and lid are not correctly assembled, the juice press will not operate.
This is a safety feature.
ONCE ALL THE PARTS ARE ASSEMBLED FIRMLY. THEN PLUG THE CORD INTO AN
ELECTRICAL OUTLET.
Do not pre-operate before adding materials or do not operate with an empty
bowl.
Using your juice press
Clean fruit and/or vegetables thoroughly, for juicing. If juicing fruit with
hard seeds, pit the fruit. Remove any hard inedible skins, i.e. skin of
melons, pineapples, and mangoes prior to juicing. If citrus fruits are being
used, remove the skin prior to juicing.
For oversized pieces of fruit and/or vegetables, cut the food into small
pieces that fit into the feeding tube and insert it through the feed tube.
Press the food pusher slowly down until all fruit or vegetables have gone
through the juice press. Do not exert too much pressure on the pusher, as this
could affect the quality of the end result and it could damage the unit.
JUICING FULL APPLE/ORANGE (medium size) Pull the button up when to squeeze
full apple, orange & big ingredients. Put the fruit in the center & fill it to
flip it into the feeding tube.
Press down the button, and lock the swivel bracket when squeezing a small
volume of fruits such as tomatoes cut pcs, peeled pomegranate, etc., then put
the ingredients into the feed inlet. Press Button” ON/OFF” when food is
processed and no more juice flows out. After the motor and screw stop
completely, take the juice cup away from the juice outlet and slag the door.
Juice Outlet Cap Assembly
This is fixed & adjustable by sliding it can be closed then the juice is
collected in a bowl & can be released in one go & can also be used for mixed
juicing. Fresh fruit juice is recommended to drink as soon as
possible, exposed to the air for a long time, taste and nutritional value will
be affected.
Maintenance
Regular maintenance of your appliance will keep it safe and in proper
operational order.
Cleaning
Always ensure that the Juice Press is turned off and the power cord is
unplugged from the power outlet before cleaning, disassembling, or assembling
and storing the appliance. Do not Immerse motor base in water or other
liquids.
Whenever possible, rinse parts immediately after each use, and use the
cleaning brush to thoroughly clean the fine mesh holes of the strainer. Brush
the inside of the strainer under running water, holding it up towards the
light to ensure the fine mesh holes are not blocked.
Use the cleaning brush provided with the Juice Press. This brush has been
specially designed to clean the strainer. Simply place the brush inside the
stainer and under running water twist the brush left and right to remove the
pulp from the strainer. You will need to use the brush provided to clean the
inside of the strainer, this should also be done under running water.
Trouble Shooting
Before you call for service review the troubleshooting tips first.
PROBLEM | POSSIBLE | WHAT TO DO |
---|---|---|
No power to the juicer. | Juicer is not plugged in. | Check the juicer is |
plugged in.
The motor has stopped.| Bowl has been over-filled with material.| Press the
reverse power button to try and clear the clog.
May need to try this a few times.
Overuse has caused the motor to shut down as a precaution against
overheating.| Switch off and let the motor cool before using it again.
Juicing bowl and lid is not correctly assembled.| Assemble the juice press
correctly.
Leaking from beneath the bowl.| Silicon pad on the base of the bowl not
correctly inserted.| Make sure the silicon pad on the base of the bowl is
correctly inserted.
Tan on the bowl, strainer, and cleaning brush.| Natural color from juicing
materials.| This is perfectly normal. to reduce discoloration ensure you rinse
and clean the appliance immediately after use.
Squeaking noise during operation.| Juicing noise from squeezing screw.| This
is perfectly normal. Ensure you do not overload the juicer.
Too much pulp is in the juice.| The strainer is damaged.| Change to the new
one.
SAFETY PRECAUTIONS
The rating for model SA4018 is 20 minutes. Do not operate this appliance for
more than the rating period continuously. Allow to cool for 15 minutes and
then resume operation.
Dishwasher Unsafe
Do not place the attachment parts in the dishwasher violating the warning may
cause serious injuries or damage to the product.
Damage Check
Always checks the appliance is in good working order and that all removable
parts are secure. Check the power cord supply carefully for any cuts or
damage.
Store in a Safe Place
When not in use store your appliance and all its accessories and instruction
manual in a safe and dry place.
Keep away from Children
do not let children operate without supervision.
Disassemble after use:
The appliance should be unplugged and disassembled after use.
- Do not put anything as a pusher (for chopsticks, spoons, etc.) other than the pusher itself.
- Remove any hard seeds or stones.
- Do not operate with wet hands
Tips for Juicing
Cut food items into small pieces for optimal extraction.
Do not place ice or frozen fruit into the Juice Press.
Do not push the food down with excessive force.
The food pusher is designed to gently push food down.
Insert food at a regular speed, allowing all the pulp to be extracted. for
maximum efficiency, do not rush this process. When Juicing leafy greens or
wheatgrass, It is suggested that you mix it with fruits or other hard
vegetables for optimal results. Juice nuts only with other foods such as
soaked soybeans or liquids. The juice from fresh fruit and vegetables is an
important part of a balanced diet.
When selecting fruit and vegetables for juicing, always select fresh and well-
ripened specimens. Fresh fruit and vegetables carry more flavor and juice than
those that are not properly ripened. Juice is best consumed when freshly made
as this is when its vitamin and mineral content is highest.
Your Juice Press can handle most varieties of fruit and vegetables. If using
fruit with hard inedible skin (i.e. watermelons, pineapple, mangoes, etc.)
always peel the skin before placing it in the Juice Press. The skin of citrus
fruit should also be removed before the fruit is placed in the Juice Press.
For better tasting citrus Juice, also remove the inner white peel from the
fruit, Fruit with stones or hard seeds (i.e. mangoes, nectarines, apricots,
and cherries) should be pitted before juicing. A small amount of lemon can be
added.
The Juice Press is not suitable for juicing very hard and starchy fruits or
vegetables such as sugar cane. when juicing fruit and vegetables of different
consistency it may help to juice different combinations, i.e. juice soft fruit
first, (i.e. oranges) then follow with hard fruit (i.e. apples). This will
help you achieve maximum juice extraction. If juicing herbs or leafy
vegetables, wrap them together to form a bundle before placing them in the
Juice Press or combine them with other ingredients for juicing.
Note: The Juice Press will only function if all parts have been assembled
correctly and the feeding tube is in position.
WARRANTY
This GLEN Slow Juicer is fully warranted against any defect arising out of
defective materials or faulty workmanship for a period of two years from the
date of purchase. Should any defect develop in this product, the customer
should bring the product to the nearest authorized service center, where the
company undertakes to get the product repaired free of charge.
This warranty is not valid if:
- The use and care instructions have not been followed.
- Defects are caused by accident, misuse, abuse, or commercial use.
- The repair work is carried out by persons not authorized by the company.
- Any modification or alteration of any nature is made in the product.
- Normal wear & tear of the product is not covered under the warranty
- The Bill/Cash memo and copy of the warranty card are not presented.
- Plastic parts and strainers are not covered under warranty as they may break if not handled carefully.
Under no circumstances, whether based on a limited warranty or otherwise shall
the company be liable for incidental, special, or consequential damages. Use
of product indicates acceptance by you of the aforesaid terms and conditions.
PRODUCT NAME: COLD PRESS SLOW JUICER SA4018
SERIAL NO: ————————————-
DATE OF PURCHASE————————
DEALER’S STAMP & SIGNATURE———–
SPECIFICATIONS
Supply Voltage | 230 V AC 50 Hz | Bowl Capacity | 500 ml |
---|---|---|---|
Power | 100 W | Net Weight | 8 Kg |
Rating | 20 min. | Carton Dimensions: (LxWxH) mm | approx 420x290x345 |
Speed | 34 RPM |
Glen Appliances Pvt. Ltd.,
1-34, DLF Ind. Area, Phase-I, Faridabad, India.
Helpline : 0129-2254191
E-mail : info@glenindia.com
Website : www.glenindia.com