Turbosound iP300 600 Watt Powered Column Loudspeaker woofers User Guide
- June 5, 2024
- Turbosound
Table of Contents
Turbosound iP300 600 Watt Powered Column Loudspeaker woofers User Guide
Important Safety Instructions
Terminals marked
with this symbol carry electrical current of sufficient magnitude to
constitute risk of electric shock. Use only high-quality professional speaker
cables with ¼” TS or twist-locking plugs pre-installed. All other installation
or modification should be performed only by qualified personnel.
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and
maintenance instructions in the accompanying literature. Please read the
manual.
Caution
To reduce the risk of electric shock, do not remove the top cover (or the rear
section). No user serviceable parts inside. Refer servicing to qualified
personnel.
Caution
To reduce the risk of fire or electric shock, do not expose this appliance to
rain and moisture. The apparatus shall not be exposed to dripping or splashing
liquids and no objects filled with liquids, such as vases, shall be placed on
the apparatus.
Caution
These service instructions are for use by qualified service personnel only. To
reduce the risk of electric shock do not perform any servicing other than that
contained in the operation instructions. Repairs have to be performed by
qualified service personnel.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Use only attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
- Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
- Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
- Do not install in a confined space, such as a book case or similar unit.
- Do not place naked flame sources, such as lighted candles, on the apparatus.
- Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.
- This apparatus may be used in tropical and moderate climates up to 45°C.
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any
person who relies either wholly or in part upon any description, photograph,
or statement contained herein. Technical specifications, appearances and other
information are subject to change without notice. All trademarks are the
property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake,
Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim,
Auratone, Aston Microphones and Coolaudio are trademarks or registered
trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd.
2021 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information
regarding Music Tribe’s Limited Warranty, please see complete details online
at musictribe.com/warranty.
Thank you for choosing a Turbosound loudspeaker product for your application. If you would like further information about this or any other Turbosound product, please visit our website at turbosound.com.
Unpacking the Loudspeaker
After unpacking the unit please check carefully for damage. If damage is found, please notify your supplier at once. You, the consignee, must instigate any claim. Please retain all packaging in case of future re-shipment.
Controls
- ENCODER KNOB toggles between Graphic and Edit modes (when pressed) and changes parameter values (when rotated).
- LCD SCREEN displays the current DSP module and parameter settings.
- PROCESS button accesses the DSP signal processing menu.
- SETUP accesses the setup features menu.
- EXIT button saves changes and returns to the previous menu screen.
- ENTER button selects sub-menu or confi rms parameter changes.
- INPUT A/INPUT B combo jacks accept input signals using XLR, balanced ¼” TRS or unbalanced ¼” TS connectors.
- LINK A/LINK B XLR connectors provide un-processed copies of the INPUT A or INPUT B signals.
iP300 DSP Menu Structure
iP Series Analogue Connection
Bluetooth Connection
To stream audio from a Bluetooth-enabled device, you will need at least one iP
speaker and an iPad/iPhone/Android/Windows* device with basic
Bluetooth connectivity.
With a streaming-only Bluetooth connection, all related iP DSP functions must
still be controlled directly from the iP rear panel via the rotary encoder.
Bluetooth Streaming
To stream Bluetooth audio with any Bluetooth device (iPad/iPhone/Android/Windows, etc.)
Mono operation
- Enable Bluetooth on your remote device.
- Switch on your iP speaker and minimize the volume.
- Select “Pair device” from the iP speaker’s Bluetooth menu.
- Check that your remote device is searching for a connection.
- Once your device detects the iP speaker, select the iP speaker from your remote device’s menu (e.g., “Turbosound iP300”).
- Wait until the remote device shows an active connection, and then check the speaker’s Bluetooth menu, which should display the name of the remote device (e.g., “HUAWEI P7-L07”).
- Bluetooth music can now be streamed to your iP speaker. The stereo signal will automatically mix down to mono.
- The iP speaker will display the Bluetooth indicator on the main, top-level DSP screen.
Stereo operation
- Complete the steps above to connect the fi rst speaker to Bluetooth audio.
- The first connected speaker automatically becomes the MASTER speaker.
- Switch on the second speaker, which becomes the SLAVE speaker.
- Select “Link speaker” from the SLAVE speaker’s Bluetooth menu.
- The SLAVE speaker will display “Slave linking…”
- Select “Link speaker” from the MASTER speaker’s Bluetooth menu.
- The MASTER speaker will display “Master Linking…”
- WAIT for the speakers to link.
- Once the linking process is complete, Bluetooth audio will stream to the two speakers. The MASTER speaker will receive the left channel, and the SLAVE speaker will receive the right channel.
- MASTER and SLAVE connection will be indicated on the main, top-level DSP screens.
*iPad and Apple are trademarks of Apple Inc. Android is a trademark of Google Inc. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Bluetooth Control
A dedicated iOS control app for Turbosound Bluetooth speakers can be downloaded from the Apple Store. This iOS control app can be used with Bluetooth pairing, or without pairing if only analogue inputs are used.
Operation with Bluetooth Pairing
- In both mono and stereo mode, first pair the MASTER speaker, and then launch the iOS control app.
- The iOS control app will automatically detect and adapt for mono or stereo mode.
- To alter the speaker settings, swipe the screen or press the settings icon. All iP speaker settings can be accessed from the iOS control app.
Operation without Bluetooth Pairing (Analogue Input Only)
- Power on the first (usually left-hand) speaker this speaker will become the MASTER speaker.
- Start the control app on the IOS device.
- Check that the app is connected and functioning with the single MASTER speaker.
- Power up the second speaker this speaker becomes the SLAVE speaker.
- Select “Link speaker” from the speaker Bluetooth menu in “Master” and “Slave” speaker to link each other.
- Check that the app’s Main Page shows both MASTER and SLAVE input and balance control.
DFU Firmware Update
Where possible please update your iP300 firmware using the iOS app.
To update, go to the Settings screen in the app and look for the “CURRENT FIRMWARE” section. This section of the Settings screen will show the current firmware version. If a firmware update is needed, the screen will display this option:
- Swipe the update slider toward the right to initiate the firmware update. The update may take several minutes.
- Update progress will be displayed on the app and the iP300 speaker’s DSP screen.
Firmware Update Fullback Procedure
In the event you are unable to update the firmware using the iOS or Android app, you may also carry out the update using this fullback procedure:
-
Download the .duffle with the new firmware version to your smartphone.
-
Force your iP300 speaker into DFU update mode by following these steps:
a. Power off the speaker.
b. Hold the ENCODER KNOB.
c. Power on the speaker.
d. Please select the option “Firmware upgrade” then press the ENCODER KNOB.
e. When you are successful, the DSP screen will show the system is ready for the firmware upgrade. -
On your smartphone, select and hold the .dfu file until the smartphone offers options for file transfer.
-
Select your smartphone’s function for sharing via Bluetooth.
-
Select the iP300 speaker for Bluetooth sharing (e.g., “HUAWEI P7-L07”).
-
When the download begins, the DSP screen will show the download progress.
-
When the download is complete, the speaker will auto-restart and boot the new firmware.
IMPORTANT NOTE: The mounting of a permanently installed sound system may be dangerous unless undertaken by qualified personnel with the required experience and certification to perform the necessary tasks. Walls, floors or ceilings must be capable of safely and securely supporting the actual load. The mounting accessory used must be safely and securely fixed both to the loudspeaker and to the wall, floor or ceiling.
When mounting rigging components on walls, floors or ceilings, ensure that all fixings and fasteners used are of an appropriate size and load rating. Wall and ceiling claddings, and the construction and composition of walls and ceilings, all need to be taken into account when determining whether a particular fixing arrangement can be safely employed for a particular load. Cavity plugs or other specialist fixings, if required, must be of an appropriate type, and must be fitted and used in accordance with the maker’s instructions.
The operation of your speaker cabinet as part of a flown system, if installed incorrectly and improperly, can potentially expose persons to serious health risks and even death. In addition, please ensure that electrical, mechanical and acoustic considerations are discussed with qualified and certified (by local state or national authorities) personnel prior to any installation or flying.
Make sure that speaker cabinets are set up and flown by qualified and certified personnel only, using dedicated equipment and original parts and components delivered with the unit. If any parts or components are missing please contact your Dealer before attempting to set up the system.
Be sure to observe the local, state and other safety regulations applicable in
your country. Music Tribe, including the Music Tribe companies listed on the
enclosed “Service Information Sheet”, assumes no liability for any damage or
personal injury resulting from improper use, installation or operation of the
product.
Regular checks must be conducted by qualified personnel to ensure that the
system remains in a secure and stable condition. Make sure that, where the
speaker is flown, the area underneath the speaker is free of human traffic. Do
not fly the speaker in areas that can be entered or used by members of the
public.
Speakers create a magnetic field, even if not in operation. Therefore, please keep all materials that can be affected by such fields (discs, computers, monitors, etc.) at a safe distance. A safe distance is usually between 1 and 2 metres.
Specifications
Other important information
- Register online. Please register your new MusicTribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
- Malfunction. Should your MusicTribe Authorized Reseller not be located in your vicinity, you may contact the MusicTribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.
- Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
Turbosound
iNSPIRE iP300
Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 5270 Procyon Street,
Las Vegas NV 89118,
United States
Phone Number: +1 702 800 8290
iNSPIRE iP300
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music
Tribe can void the user’s authority to use the equipment.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modification to this equipment. Such modifications could void the
user authority to operate the equipment.
FCC RF Radiation Exposure Statement:
(1) This Transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
(2) This equipment complies with FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance of 20 centimetres between the radiator and your
body.
Hereby, Music Tribe declares that this product is in compliance with Directive 2014/53/EU, Directive 2014/30/EU, Directive 2014/35/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/ EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>