Belkin F5U203EA Portable Bridge Hub User Guide
- June 16, 2024
- belkin
Table of Contents
Belkin F5U203EA Portable Bridge Hub
Introduction
Congratulations and thank you for purchasing the Belkin USB Anywhere.
USB Anywhere is a multi-featured USB storage bridge. It has been designed to transfer data between two USB Mass Storage Class compliant devices—without the need for a PC. It is a perfect solution for anyone who wants to copy data, images or music from pen drive to pen drive, flash card to USB storage devices, MP3 player to MP3 player, or even from digital cameras to USB external harddisks. USB Anywhere supports USB 1.1 and USB 2.0 devices.
Features
- Share data between any two Mass Storage Devices without a computer
- Easy copy/Transfer files with just one click of the button
- Compliant with OTG supplement Rev. 1.0 and USB specification version 2.0 for full-speed (12Mbps) USB host and device
- Support USB storage devices with USB Mass Storage Device Class compliance
- One Power Button
- One Reset Button
- Mode switch for Full disk or Root directory copy
- Uses 3 AAA alkaline batteries or power supply
Operating Environment
- Operating Temperature: 5-45oC
- Shipping and Storage Temperature: -40 -65oC
- Operating Humidity: 30% – 85%
- Altitude: 0 to 7000 feet
Package Includes
- USB Anywhere
- Power Supply (DC 5V/1.5A-2.6A)
- User manual
Getting Started
- I nstall three AAA alkaline or rechargeable batteries (batteries not included) or plug in the AC power adapter. Please note: Some MP3 players will require additional power in which case the AC power adapter has to be plugged in.
- Press the Power button to turn the USB Anywhere on.
Copying all data files from the source device: Full Mode
-
To copy ALL files from the source device to the target device, move the Full/Root switch in the “Full” position.
-
Connect your source device. The source LED will pulse with a blue light until the device is recognized. Once the device is recognized, the LED will then light up with a solid blue light. If the source LED turns red, the attached device is not a suitable source device.
-
Before connecting your target device, make sure the target device has sufficient unused memory space for the files you are about to transfer. It is possible for the source device to have a higher storage capacity than the target device. However, the files that are to be transferred must not exceed the unused memory space on the target device.
-
Connect your target device. The target LED will pulse with a blue light until the device is recognized. Once the device is recognized, the LED will then light up with a solid blue light. If the target LED turns red, the attached device is not a suitable target device or does not have enough memory space available for the files you are about to transfer.
-
Press the Copy button to transfer data from the source device to the target device.
The source and target LED will start pulsing for the duration of the data transfer. -
Once the data transfer is complete, the source and target LED will stop pulsing and the LED in the shape of a checkmark ( ) will light up green.
Copying files in the root directory: Root Mode
Root directory: the top directory in a file system. The root directory is provided by the operating system and has a special name. For example, in DOS systems the root directory is called \.
- To copy only the file(s) in the root directory from the source device to the target device, move the Full/Root switch on the USB Anywhere into the “Root” position.
- Connect your source device. The source LED will pulse with a blue light until the device is recognized. Once the device is recognized, the LED will then show a solid blue light. If the source LED turns red, the attached device is not a suitable source device.
- Before connecting your target device, make sure the target device has sufficient unused memory space for the files you are about to transfer. It is possible for the source device to have a higher storage capacity than the target device. However, the files that are to be transferred must not exceed the unused memory space on the target device.
- Connect your target device. The target LED will pulse with a blue light until the device is recognized. Once the device is recognised, the LED will then light up with a solid blue light. If the target LED turns red, the attached device is not a suitable target device or does not have enough memory space available for the files you are about to transfer.
- Press the Copy button to transfer data from the source device to the target device. The source and target LED will start pulsing for the duration of the data transfer.
- Once the data transfer is complete, the source and target LED will stop pulsing and the LED in the shape of a checkmark ( ) will light up green.
Data transmission errors
If the LED in the shape of a checkmark ( ) turns red during copying, this means that a data transmission error has occurred. The copy was not successful. To continue, please carry out the following:
- Press the reset button.
- Check if the target device has sufficient unused memory space to hold the files you wish to transfer.
- Repeat the instruction for copying files as described previously.
Make sure to test all your source and target devices before first use
- In some exceptional cases it is possible that the USB Anywhere indicates a correct data transfer when in fact the files have not been transferred. In this case your source or target device is not compatible with the USB anywhere and they should not be used together.
- When you first use the USB Anywhere, please test all your source and target devices for compatibility by copying a file from the source to the target device and checking the copied file. When the transfer is successful, your device is fully compatible.
Low battery indicator
- The LED in the shape of a battery indicates the power status of your batteries. When the LED lights up, this means that the batteries have sufficient power for the operation of the USB Anywhere. If the LED does not light up when you switch on the USB Anywhere or indeed shuts off during operation, you will need to replace the batteries with a new set. The included power supply can also be used as an alternative to batteries.
Automatic power shutdown function
- The USB Anywhere will shut down automatically after 30 seconds if it is not in use or after a device is unplugged. If you choose not to use batteries, the USB Anywhere will shut down once it is unplugged from the power supply.
End file transfer
- If you wish to interrupt the data transfer process, simply press the Reset button on the USB Anywhere. The USB Anywhere will stop the transfer and will return to starting position. Any files that were already transferred prior to the interruption will remain on the target device.
Data files on the target device
- Transferring data from the source device to the target device does not overwrite any existing data on the target device. With each new transfer operation, a new folder will be created which will hold the newly transferred data.
Transfer of hidden or secured files
- The USB Anywhere will not copy any hidden or secured data from the source device to the target device. Such protected data can include MP3 files.
Belkin lifetime product warranty
- For the life of the product, Belkin warrants that this device shall be free of defects in design, assembly, material and workmanship (free replacement).
Contact Information
Belkin Ltd.
- Express Business Park Shipton Way, Rushden NN10 6GL, United Kingdom
- Phone: +44 (0) 1933 35 2000
- Fax: +44 (0) 1933 31 2000
Belkin B.V.
- Boeing Avenue 333 1119 PH Schiphol-Rijk, The Netherlands
- Phone: +31 (0) 20 654 7300
- Fax: +31 (0) 20 654 7349
Belkin Tech Support
- Europe: 00 800 223 55 460
Belkin GmbH
- Hanebergstrasse 2 80637 Munich, Germany
- Phone: +49 (0) 89 143405 0
- Fax: +49 (0) 89 143405 100
Belkin SAS
- 130 rue de Silly 92100 Boulogne-Billancourt France
- Phone: +33 (0) 1 41 03 14 40
- Fax: +33 (0) 1 41 31 01 72
Frequently Asked Questions
What is the Belkin F5U203EA Portable Bridge Hub, and what is its primary function?
The Belkin F5U203EA Portable Bridge Hub is a USB storage bridge designed to transfer data between two USB Mass Storage Class compliant devices without the need for a PC. Its primary function is to facilitate data transfer between various USB storage devices.
What types of devices can I connect and share data between using the Belkin Portable Bridge Hub?
You can share data between any two Mass Storage Devices that are USB Mass Storage Class compliant. This includes USB pen drives, flash cards, MP3 players, digital cameras, and USB external hard disks.
Does the Belkin Portable Bridge Hub support both USB 1.1 and USB 2.0 devices?
Yes, the Belkin Portable Bridge Hub supports both USB 1.1 and USB 2.0 devices, ensuring compatibility with a wide range of USB storage devices.
How do I power the Belkin Portable Bridge Hub, and what are the power options?
You can power the Belkin Portable Bridge Hub using either three AAA alkaline or rechargeable batteries (not included) or by plugging in the included AC power adapter. Some MP3 players may require additional power, in which case you should use the AC power adapter.
What does the low battery indicator on the Belkin Portable Bridge Hub signify, and how should I address it?
The low battery indicator (battery-shaped LED) indicates the status of your batteries. If it lights up, the batteries have sufficient power. If it does not light up or turns off during operation, replace the batteries with a new set or use the included power supply as an alternative.
Does the Belkin Portable Bridge Hub support automatic power shutdown, and when does it occur?
Yes, the Belkin Portable Bridge Hub has an automatic power shutdown function. It will shut down automatically after 30 seconds of inactivity or when a device is unplugged. If you use the power supply, it will shut down upon unplugging.
Will transferring data from the source device to the target device overwrite existing data on the target device?
No, transferring data from the source device to the target device will not overwrite existing data. Each new transfer operation creates a new folder to hold the newly transferred data.
Can the Belkin Portable Bridge Hub copy hidden or secured files from the source device to the target device?
No, the Belkin Portable Bridge Hub will not copy hidden or secured data from the source device to the target device, which can include MP3 files.
Is there a warranty for the Belkin F5U203EA Portable Bridge Hub, and what does it cover?
Belkin offers a lifetime product warranty for the Belkin F5U203EA Portable Bridge Hub. This warranty covers defects in design, assembly, material, and workmanship, providing free replacement for the life of the product.
How do I set up and use the Belkin F5U203EA Portable Bridge Hub for data transfer?
To set up and use the Belkin F5U203EA Portable Bridge Hub for data transfer, follow the instructions provided in the user manual. It involves installing power sources, connecting source and target devices, and pressing the Copy button for transfer.
Can I use the Belkin F5U203EA Portable Bridge Hub to transfer files between different types of USB storage devices, such as a pen drive and an external hard disk?
Yes, the Belkin F5U203EA Portable Bridge Hub allows you to transfer files between various types of USB Mass Storage Class compliant devices, including pen drives, flash cards, MP3 players, digital cameras, and USB external hard disks.
Is it possible to transfer all files from one device to another using the Belkin Portable Bridge Hub, and how do I do it?
Yes, you can transfer all files from one device to another using the Belkin Portable Bridge Hub. Set the Full/Root switch to Full, connect both the source and target devices, and press the Copy button to initiate the transfer.
Reference:Belkin F5U203EA Portable Bridge Hub User Guide- device.report