HYUNDAI 2020 KONA Car User Guide

June 16, 2024
HYUNDAI

HYUNDAI 2020 KONA Car User Guide

Getting Started Guide

Audio, Connectivity, and Navigation

Audio, Connectivity, and Navigation

This Getting Started Guide provides simple instructions to help you learn how to operate a few useful features so you can get started on your road to an incredible ownership experience. Thanks again for choosing Hyundai!

Click on topics listed within the Table of Contents to jump to sections.
Click on links in the Notes sections for additional information.
Navigate back to the Table of Contents at any time.

Table of Contents

Getting Started Guide Audio, Connectivity, and Navigation

Connecting a Device Phone Pairing

  1. The vehicle’s shifter must be in PARK. Press the SETUP* button.

  2. *Press the BLUETOOTH® icon on the screen. Then press BLUETOOTH CONNECTION.

    **

  3. Press ADD NEW. Then turn on your phone’s BLUETOOTH and select the device (Kona) found by your phone

    NOTE
    : Bluetooth settings can be found in the SETTINGS app on most phones. Refer to your phone’s owner’s manual or visit HyundaiBluetooth.com for more information. * The display, button, and/or icon locations may differ from the images shown.

  4. Your phone may require a PASSKEY. If prompted, enter it into your phone.

  5. The vehicle will confirm that your phone has been successfully connected.

  6. The vehicle will confirm that your contacts download is complete.

  7. Select YES if you would like to set your phone as the priority device for Auto Connection.

    Note If your phone is supported, your contact list may be transferred to your vehicle automatically. Depending on the phone make and model:

    • Some phones may request approval to download contacts; this process will take a few minutes
    • Contact list may start with First or Last Name, depending on phone models
    • Some phones may require additional confirmation on their device to allow contacts to sync

Making a Call Using Voice Commands

Before You Start
Make sure your phone has been paired and your contacts have been downloaded. If this has not been done, please follow the instructions on the previous pages.

  1. Press the PUSH TO TALK* button located on the steering wheel. You will hear a beep.

  2. After the beep, say the command “CALL” followed by the name of the desired contact. Example: “CALL JOHN SMITH”

  3. Select the number you would like to call by saying “ONE” or “TWO.

    **Note *** The display, button, and/or icon locations may differ from the images shown.

  4. The selected number will be dialed and your contact’s 4 name and phone number will appear on the screen.

  5. To end the call, press the END CALL* button located on the steering wheel.

    Note : The display, button, and/or icon locations may differ from the images shown.

  6. To start voice command, press the PUSH TO TALK* button located on the steering wheel.

Here are a few common voice commands to use after your phone has been paired:
“HELP ” provides guidance on commands that can be used within the current function.
Say “CALL” to initiate a call followed by saying the name of the saved contact with whom you wish to speak. For example: “CALL JOHN SMITH.”
“DIAL” makes a call by dialing the spoken numbers. For example: “DIAL 1-800-633-5151.”
“PHONE ” provides guidance on phone-related commands.
“CALL HISTORY” displays the phone’s call history screen.
CONTACTS” displays the phone’s contacts screen.

Note Compatibility and performance may vary based on your phone, the phone’s software, and your wireless carrier.
*The display, button, and/or icon locations may differ from the images shown.

Smartphone Connection (if equipped) Setting Up Android Auto™/Apple

CarPlay

Android Auto and Apple CarPlay allow you to access the most commonly used smartphone features, including calling, navigation, text messaging, and playing music all from your driver’s seat.

Connect a USB cable from your phone to the vehicle’s USB data port.
Allow permission from your phone to connect to your vehicle
Enjoy using the applications displayed on your vehicle’s multimedia screen.

Android Auto users will be prompted to view a tutorial. Select your option
and proceed.
NOTE   USB data port will typically be located in or near the front in- dash console. Check your vehicle’s owner’s manual for specific location

Smartphone Connection (if equipped) Making a Call

  1. Connect a USB cable from your phone to the vehicle’s USB data port.* Notice the icon displayed on your screen.

  2. Press the PUSH TO TALK** button located on the steering wheel and say a command after the beep.

  3. For Apple CarPlay, you will see these screens: For Android Auto, you will see these screens:
    NOTE :  USB data port will typically be located in or near the front in- dash console. Check your vehicle’s owner’s manual for specific location.

Smartphone Connection (if equipped) Making a Call

  1. The display, button, and/or icon locations may differ from the images shown. To end the call, press the END CALL* button located on the steering wheel.

NOTE: The display, button, and/or icon locations may differ from the images shown.

  1. Finding/Setting a Destination Using Voice Recognition

  2. Press the PUSH TO TALK* button located on the steering wheel. You will hear a beep
    After the beep, say a command. Example: “FIND COFFEE SHOP.

  3. The results will be listed on the screen. Say the line item number to make your selection. Example: “THREE”

    Note: The display, button, and/or icon locations may differ from the images shown.

  4. The destination route will be displayed on the screen and route guidance will begin.

  5. Press the PUSH TO TALK* button located on the steering wheel and say “CANCEL ROUTE” after the prompt to stop navigation guidance.

NOTE: The display, button, and/or icon locations may differ from the images shown.

Box

  1. The vehicle must be in PARK. Press the NAV* button.

  2. Touch the SEARCH box.

  3. Enter the address of your destination and press OK when finished.

    Note : The display, button, and/or icon locations may differ from the images shown.

  4. The route to your destination will be displayed on the 4 screen. Select START GUIDANCE to begin your route.

  5. Press the PUSH TO TALK* button located on the steering wheel and say “CANCEL ROUTE” after the prompt to stop navigation guidance.

NOTE The display, button, and/or icon locations may differ from the images shown.

To start voice command, press the PUSH TO TALK* button located on the steering wheel

Here are a few common voice commands to use after your phone has been paired: “HELP” provides guidance on commands that can be used within the current function. Say “FIND

” to search for an address and set it as a destination. For example: “300 (THREEZERO-ZERO) MAIN STREET, FOUNTAIN VALLEY.” “FIND ” searches for the point of interest specified. For example: “FIND BANKS.” “GO HOME/TO WORK” sets the destination to your home or work/office. Your home or work address must be set in the navigation system. “CANCEL ROUTE” cancels the route to the set destination and exits guidance. “POLICE STATION/HOSPITAL” displays a list of the nearest police stations and hospitals.

Note The system will search for addresses or destinations located within the state the
vehicle is currently in. If you want to search in another state, say the name of the
state first.
Compatibility and performance may vary based on your phone, the phone’s
software, and your wireless carrier.
*The display, button, and/or icon locations may differ from the images shown.

  1. Press the DESTINATION SEARCH BY VOICE*
    button. When prompted, you can say the name of a Point of Interest (POI), an address, or a POI in a city.
    Example: “FIND COFFEE SHOP IN FOUNTAIN VALLEY, CALIFORNIA.”

  2. A list of nearby destinations matching your search criteria will be displayed. Say the line item number to make your selection. Example: Say “ONE” to select the first Starbucks listed.

  3. The destination route will be displayed on the screen and route guidance will begin.

  4. Note Blue Link® subscription is required. To enroll, please visit your dealer or visit
    MyHyundai.com. All product names, trademarks, logos, and brands are property of
    their respective owners. All company, product, trademarks, and service names used herein are for illustrative purposes only. *The display, button, and/or icon locations may differ from the images shown.

Custom Button Initial Setup/Reassign Feature

The Custom Button ( ) can be used to quickly access your favorite feature with just the touch of a button.

Initial Setup

  1. Press the CUSTOM BUTTON.
  2. Select from the listed options** to set as your custom button. For example, select PHONE.

Reassign Feature

  1. Press and hold down the CUSTOM BUTTON* for 2 to 3 seconds.

  2. Select from the listed options** to set as your custom button. For example, select HOME.

**Note *
The display, button, and/or icon locations may differ from the images shown.
Listed options may differ from the image shown.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals