tuya TV01RGB TV LED Backlight with Camera User Manual
- June 12, 2024
- Tuya
Table of Contents
TV LED Backlight
with Camera
User Manual
Delivery contents:
1x LED light strip
1x Camera
1x Adaptor
8x mounting clips
1x user manual
Interface introduction and installation
Download the APP
Search for Tuya Smart in APP store or Google Play or Scan the QR Code below to download.
https://smartapp.tuya.com/tuyasmart
Register/Log in with exsiting account
2 .1.Register
If you do not possess an account, you may register for one. To do so, select
the option “Create New Account,” and read the Privacy Policy on the APP.
Afterward, click “Agree” to proceed to the registration page.
Please note that registration is only available for mobile numbers in China.
If you are not a China mobile user, you can opt to register using your email
address. A verification code will be sent to your email, which you will require
to complete the registration.
2.2. Login with existing account
If you already have an account, select “Log in with existing account.”
The system will automatically select the current Country/Region, or you can
manually select the Country/Region. Then, input your registered mobile number
or email address, along with your account password to log in to the APP.
Add devices
3.1. AP Mode (Blink Slowly)
Tips: The devices solely function with 2.4GHz wifi and not with 5GHz wifi.
The WIFI password must not contain any special characters, such as !@#$%^&*(),
during configuration. To ensure optimal configuration, please place your phone
and devices as close as possible.
| 
---|---
|
Paint Bucket: Could select the color for all the LED strip Brush: Add back the
light been
Erasered Eraser: Delete the light of the strip
3.2. EZ Mode (Blink Quickly)
Tips: The devices only support 2.4GHz wifi currently not 5GHz wifi . And the
WIFI password should not contain any special characters eg. !@#$%^&*() when
configuring please put your phone and devices as closer as possible.
|
---|---
|
FAQ
Q1: How can I reset the device to its factory settings?
A1: You can either delete the device directly from your app list or press and hold the reset button for 8 seconds to remove it.
Q2: Why can't I connect the device successfully?
A2: a. Please ensure that the device is powered on and that the network is functioning well. b. Try re-plugging the device and restarting. c. Reset the device and add it again as per the user manual.
Q3: Why is the color not being controlled as expected?
A3: a. Ensure that the light strip is plugged into the USB port. b. Try re- plugging the device and restarting. c. Reset the device and add it again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>