Turbosound iP82 Inspire 2-Way 8″ Full Range Loudspeaker for Portable PA Applications User Guide

Quick Start Guide

iNSPIRE
iP82/iP15B/iP12B

2-Way 8″ Full Range Loudspeaker for Portable PA Applications 1,000 Watt Powered 15″/12″ Subwoofer with Dual Amplifiers for Satellite Speakers, Klark Teknik Spatial Sound Technology, Digital Mixer, Remote Control via iPhone/iPad and Bluetooth Audio Streaming

Important Safety Instructions

| CAUTION
RISK OF ELECTRIC SHOCK!
DO NOT OPEN!|
---|---|---

Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.

This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.

This symbol, wherever it appears, alerts you to important operating andmaintenance instructions in the accompanying literature. Please read the manual.

Caution
To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel.

Caution
To reduce the risk of fire or electric shock,do not expose this appliance to rain and moisture. The apparatus shall not be exposed to drippingor splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution
These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If theprovided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall  remain readily operable.
17. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
18. Do not install in a confined space, such as a book case or similar unit.
19. Do not place naked flame sources, such as lighted candles, on the apparatus.
20. Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.
21. This apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.

Thank you for choosing a Turbosound loudspeaker product for your application. If you would like further information about this or any other Turbosound product, please visit our website at turbosound.com.

Unpacking the Loudspeaker

After unpacking the unit please check carefully for damage. If damage is found, please notify your supplier at once. You, the consignee, must instigate any claim.
Please retain all packaging in case of future re-shipment.

Controls

1. ENCODER KNOB toggles between Graphic and Edit modes (when pressed) and changes parameter values (when rotated).
2. LCD SCREEN displays the current DSP module and parameter settings.
3. PROCESS button accesses the DSP signal processing menu.
4. SETUP button accesses the setup features menu.
5. EXIT button saves changes and returns to the previous menu screen.
6. ENTER button selects sub-menu or confirms parameter changes.
7. INPUT A/INPUT B combo jacks accept input signals using XLR, balanced ¼” TRS or unbalanced ¼” TS connectors.
8. LINK A/LINK B XLR connectors provide un-processed copies of the INPUT A or INPUT B signals.
9. OUTPUT A/OUTPUT B offers Neutrik SpeakON compatible connections to drive additional passive speaker cabinets.
10.   INPUT on iP82 panel accepts power amp connections using Neutrik SpeakON compatible connectors.

IP DSP Menu Structure

Displays the following Bluetooth status information:
• Bluetooth symbol indicates connection to audio and remote
control device (iPhone, etc.).
• “M” or “S” below the Bluetooth symbol indicate that
the speaker is linked to another iP speaker as MASTER
(left channel, “M”) or SLAVE (right channel, “S”).
Rotate the encoder knob to adjust the output volume.
Press the encoder knob to enter the PROCESS menu.
| | Volume| Rotate the encoder to change the output volume.
| | MODE| Selects from 4 preset equalisations, depending on function and
music type.
| | INPU| Sets input mixer gain for analogue input A and B, Bluetooth,
as well as Mono on/off setting.
| | EQ (Equalisation)| Allows adjustment of three band equaliser control, bass, midrange and treble.
| | POSIT. (Position)| Selects DSP compensation depending on the speaker position:
corner, wall or floor.
| | BT (Bluetooth)| Lets you pair the speaker with mobile Bluetooth devices and link to another iP speaker as master / slave.
| | SUBWOOFER| Allows control of subwoofer relative level.
| | SETUP| Sets LCD back panel contrast, device lock and factory reset.
| | INFO| Displays model and firmware information.

*iPhone and iPad are trademarks of Apple Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks is under license. Android is a trademark of Google Inc.
Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

iP Series Analogue Connection
Despite their sophistication, iP speakers offer straightforward analogue connectivity, and you can easily arrange the iP system to allow simple control of levels from other devices, such as mixers. You can also daisy-chain multiple iP speakers using only the analogue connections, and then directly control the overall level from your mixer’s master fader.

For typical operation using the iP speakers as a 2.1 subwoofer / satellite system, make all connections using the following procedure:

1. Set the DSP volume and input gain settings on the iP speaker to a flat “0 dB” setting.
2. Connect the mixer’s left stereo output to the iP subwoofer’s analogue INPUT A
3. Connect the mixer’s right stereo output to the iP subwoofer’s analogue INPUT B.
4. Connect the subwoofer’s OUTPUT A to the left iP82’s INPUT connection.
5. Connect the subwoofer’s OUTPUT B output to the right iP82’s INPUT connection.
6. Using the DSP control panel on the speaker, set your desired OUTPUT levels and EQ curves.

If you wish to deploy your speakers in a left-right stereo configuration with dual subwoofers, use this procedure:

1. Set the DSP volume and input gain settings on all of the iP speakers to a flat “0 dB” setting.
2. Select “Mono: On” from the DSP submenu of both subwoofers. The “Mono” setting will sum each subwoofer’s analogue inputs before sending the combined signal out to that subwoofer’s respective satellite speaker(s).
3. Connect the mixer’s left stereo output to the left iP subwoofer’s analogue INPUT A.
4. Connect the left subwoofer’s OUTPUT A to the iP82 satellite speaker’s INPUT connection. (If you have an additional satellite speaker, you can use the subwoofer’s OUTPUT B to send an identical signal to the extra speaker.)
5. Connect the mixer’s right stereo output to the right iP subwoofer’s analogue INPUT A.
6. Connect the right subwoofer’s OUTPUT A and/or OUTPUT B to the right channel satellite speakers.
7. Using the DSP control panel on each speaker, set your desired OUTPUT levels and EQ curves.

iP Series Bluetooth Instructions

Bluetooth Connection
To play audio from a Bluetooth-enabled device, you will need at least one iP speaker and an iPad/iPhone/Android/Windows device with basic
Bluetooth connectivity. With a basic Bluetooth connection, all related iP DSP functions must still be controlled directly from the iP rear panel via the rotary encoder.
For Apple iOS devices, you can also download a dedicated Turbosound iP Bluetooth app from the Apple App Store. This iP Bluetooth app allows you to control a single or stereo pair of iP speakers, including all DSP functions, remotely from your iOS device (see “Bluetooth Control” below for more information).

Bluetooth Streaming
To stream Bluetooth audio with any Bluetooth device (iPad/iPhone/Android/Windows, etc.)

Single subwoofer operation

1. Enable Bluetooth on your remote device.
2. Switch on your iP speaker and minimize the volume.
3. Select “Pair device” from the iP speaker’s Bluetooth menu.
4.  Check that your remote device is searching for a connection.
5. Once your device detects the iP speaker, select the iP speaker from your remote device’s menu (e.g., “Turbosound iP15B”).
6. Wait until the remote device shows an active connection, and then check the speaker’s Bluetooth menu, which should display the name of the remote device (e.g., “HUAWEI P7-L07”).
7. Bluetooth music can now be streamed to your iP speaker.
8. The iP speaker will display the Bluetooth indicator on the main, top-level DSP screen.
9. The stereo signal will be down mixed to mono for the subwoofer, but will remain in stereo for the left and right speaker outputs.

Dual subwoofer operation

1. Complete the steps above to connect the first speaker to Bluetooth audio.
2. The first connected speaker automatically becomes the MASTER speaker.
3. Switch on the second speaker, which becomes the SLAVE speaker.
4. Select “Link speaker” from the SLAVE speaker’s Bluetooth menu.
5. The SLAVE speaker will display “Slave linking…”
6. Select “Link speaker” from the MASTER speaker’s Bluetooth menu.
7. The MASTER speaker will display “Linking Master …”
8. WAIT for the speakers to link.
9. Once the linking process is complete, Bluetooth audio will stream to the two speakers. The MASTER speaker will receive the left channel, and the SLAVE speaker will receive the right channel.
10. MASTER and SLAVE connection will be indicated on the main, top-level DSP screens.

Channel Routing for Audio Streaming

A dedicated iOS control app for Turbosound Bluetooth speakers can be downloaded from the Apple Store.

| Subwoofer| Satellite Output 1| Satellite Output 2
---|---|---|---
1 Speaker connected| Mono combination: left + right| Left Channel of streamed signal| Right channel of streamed signal
2  Speakers connected Master Speaker| Left channel| Left channel| Left channel
2  Speakers connected Mono selected
Both Speakers| Mono Left + Right| Mono Left + Right| Mono Left + Right
2  Speakers connected Slave Speaker| Right channel| Right channel| Right channel

Bluetooth Control
A dedicated iOS control app for Turbosound Bluetooth speakers can be downloaded from the Apple Store.

• In both mono and stereo mode, first pair the Master speaker, and then launch the iOS control app.
• The iOS control app will automatically detect and adapt for mono or stereo mode.
• To alter the speaker settings, swipe the screen or press the settings icon. All iP speaker settings can be accessed from the iOS control app.

Main Page (1 speaker)| Main Page (2 speakers linked)| Settings Page
---|---|---

IMPORTANT NOTE:
The mounting of a permanently installed sound system may be dangerous unless undertaken by qualified personnel with the required experience and certification to perform the necessary tasks. Walls, floors or ceilings must be capable of safely and securely supporting the actual load. The mounting accessory used must be safely and securely fixed both to the loudspeaker and to the wall, floor or ceiling.
When mounting rigging components on walls, floors or ceilings, ensure that all fixings and fasteners used are of an appropriate size and load rating. Wall and ceiling claddings, and the construction and composition of walls and ceilings, all need to be taken into account when determining whether a particular fixing arrangement can be safely employed for a particular load. Cavity plugs or other specialist fixings, if required, must be of an appropriate type, and must be fitted and used in accordance with themaker’s instructions.
The operation of your speaker cabinet as part of a flown system, if installed incorrectly and improperly, can potentially expose persons to serious health risks and even death. In addition, please ensure that electrical, mechanical and acoustic considerations are discussed with qualified and certified (by local state or national authorities) personnel prior to any installation or flying.
Make sure that speaker cabinets are set up and flown by qualified and certified personnel only, using dedicated equipment and original parts and components delivered with the unit. If any parts or components are missing please contact your Dealer before attempting to set up the system.
Be sure to observe the local, state and other safety regulations applicable in your country. Music Tribe, including the Music Tribe companies listed on the enclosed “Service Information Sheet”, assumes no liability for any damage or personal injury resulting from improper use, installation or operation of the product. Regular checks must be conducted by qualified personnel to ensure that the system remains in a secure and stable condition. Make sure that, where the speaker is flown, the area underneath the speaker is free of human traffic. Do not fly the speaker in areas that can be entered or used by members of the public.
Speakers create a magnetic field, even if not in operation. Therefore, please keep all materials that can be affected by such fields (discs, computers, monitors, etc) at a safe distance. A safe distance is usually between 1 and 2 metres.

Specifications

| iP15B| iP12B
---|---|---
System
Frequency response| 45 Hz – 150 Hz ±3 dB
38 Hz – 200 Hz -10 dB| 45 Hz – 150 Hz ±3 dB
38 Hz – 200 Hz -10 dB
Nominal dispersion| Half space| Half space
Maximum SPL| 121.5 dB| 120 dB
Crossover type| Active| Active
Transducers| 1 x 15″ (381 mm) LF driver| 1 x 12″ (305 mm) LF driver
Limiter| Peak and RMS| Peak and RMS
Amplifier
Maximum output power
Subwoofer
Satelites| 600 W
2 x 200 W| 600 W
2 x 200 W
Type| Class-D| Class-D
Protection| Short circuit, open circuit, thermal| Short circuit, open circuit, thermal
Connectors
Output L / R| 2 x Neutrik speakON NL4, pins 1+ / 1-| 2 x Neutrik speakON* NL4, pins 1+ / 1-
Input A / B
Sensitivity
Input impedance
Maximum input level| 2 x combo jack / XLR
4 dBu, nominal
16 kΩ unbalanced, 33 kΩ balanced
+22 dBu| 2 x combo jack / XLR
4 dBu, nominal
16 kΩ unbalanced, 33 kΩ balanced
+22 dBu
Link output| XLR| XLR
Mains supply| IEC mains connector with integrated power switch| IEC mains connector with integrated power switch
Controls
Hardware| Rotary push-encoder| Rotary push-encoder
Software| iOS interface via Bluetooth| iOS interface via Bluetooth
User DSP Functions
Factory EQ presets| Positioning, sound mode, phase| Positioning, sound mode, phase
Display| LCD 128 x 32, blue, backlit| LCD 128 x 32, blue, backlit
Equalisation| Bass, middle and treble| Bass, middle and treble
Crossover| High pass L-R 24 dB/oct| High pass L-R 24 dB/oct
Protection| Lock-out function for all settings| Lock-out function for all settings
Bluetooth Wireless Technology
Frequency range| 2402 MHz ~ 2480 MHz| 2402 MHz ~ 2480 MHz
Channel number| 79| 79
Version| Bluetooth 4.0 dual mode| Bluetooth 4.0 dual mode
Output| 8 dBm| 8 dBm
Compatibility| Supports A2DP 1.2 profile| Supports A2DP 1.2 profile
Maximum communication range| 30 m (without interference)| 30 m (without interference)
Connectivity| Master-slave: stereo pairing link| Master-slave: stereo pairing link
Power Supply
Power consumption| 110 W @ 1/8 max power| 110 W @ 1/8 max power
Voltage (fuses)
USA / Canada / Japan
UK / Australia / Europe /Korea/China| 100-120 V~, 50/60 Hz (T 6.3 A H 250 V)
220-240 V~, 50/60 Hz (T 3.15 A H 250 V)| 100-120 V~, 50/60 Hz (T 6.3 A H 250 V)
220-240 V~, 50/60 Hz (T 3.15 A H 250 V)
Enclosure
Dimensions| 570 x 460  x 610 mm (22.4 x 18.1 x 24.0″)| 485 x 420 x 500 mm (19.1 x 16.5 x 19.7″)
Net weight| 26.3 kg (58.0 lbs)| 22.3 kg (49.2 lbs)
Construction| 15 mm (5/8″) birch plywood box| 15 mm (5/8″) birch plywood sub
Finish| Semi matt black paint| Semi matt black paint
Grille| Powder coated perforated steel| Powder coated perforated steel
Flying hardware| —| —
Accessories
| —| —

*Peak output. Independent of limiters and driver protection circuits
†Only qualified personnel are allowed to modify the AC-Main cord and to adhere to all applicable national standards.

| iP82
---|---
System
Frequency response| 70 Hz – 18 Hz ±3 dB
58 Hz – 20 Hz -10 dB
Nominal dispersion| 70° H x 70° V @ -6 dB points
Power handling (IEC)| 150 W continuous, 600 W peak
Sensitivity| 91 dB (1 W @ 1 m)
Maximum SPL| 113 dB continuous, 119 dB peak
Impedance| 4 Ω
Components| 1 x 8″ (203 mm) LF driver
1 x 1″ (25 mm) HF compression driver
Enclosure
Connectors| 1 x Neutrik speakON* NL4
Wiring| Pins 1+ / 1- input, pins 2+ / 2- N/C
Dimensions (H x W x D)| 455 x 280 x 235 mm (17.9 x 11.0 x 9.3″)
Net weight| 9.3 kg (20.5 lbs)
Construction| 15 mm (5/8″) birch plywood
Finish| Semi matt black paint
Grille| Powder coated perforated steel
Flying hardware| —
Accessories
| —

**Other important information

**

Important information

1. Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.

2. Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at usictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com.
   Alternatively, please submit an online warranty claim atmusictribe.com BEFORE returning the product.

3. Power Connections. Before plugging then unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Turbosound
iNSPIRE iP82/iP15B/iP12B

Las Vegas NV 89118,
United States
Phone Number:| +1 702 800 8290

FCC ID: QWHIP12B-15B
iNSPIRE iP82/iP15B/iP12B
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.

Hereby, Music Tribe declares that this product is in compliance with Directive 2014/53/EU, Directive 2014/30/EU, Directive 2014/35/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark

Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. Such modifications could void the user authority to operate the equipment.
FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 centimeters between the radiator and your body.

We Hear You

References

• Music Tribe
• Music Tribe
• Music Tribe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>